Abstract
An alkyd/melamine resin mixtures are mainly used in industrial baking enamels. The aim of this work was to study the curing behaviour of alkyds based on dehydrated castor oil and soybean oil with melamine resin by differential scanning calorimetry (DSC). The kinetic parameters obtained by the transformation of dynamic DSC results into isothermal data through Ozawa kinetic model are in good agreement with those determined by the isothermal DSC experiments. The apparent degree of curing, determined by DSC measurements and sol/gel method, has a pronounced effect on the hardness of the resultant coating film.
Similar content being viewed by others
References
R. Radičević and J. Budinski-Simendić, J. Serb. Chem. Soc., 70 (2005) 593.
D. Plath, H. Frind and M. Schön, Polym. Paint Col. J., 3 (1989) 478.
J. Dullius, C. Ruecker, V. Oliveira, R. Ligabue and S. Einloft, Prog. Org. Coat., 57 (2006) 123.
A. I. Aigbodion and F. E. Okieimen, Ind. Crop. Prod., 13 (2001) 29.
Y. Nakayama, Prog. Org. Coat., 33 (1998) 108.
Modern Plastic Encyclopaedia Handbook, McGraw-Hill Inc., New York 2000, p. 88.
G. Odian, Principles of Polymerization, Wiley-Interscience, Noboken, New Jersey 2004, p. 120.
A. R. Marrion, The Chemistry and Physics of Coatings, The Royal Society of Chemistry, London 2004, p. 123.
S.-N. Gan and B.-Y. Tan, J. Appl. Polym. Sci., 80 (2001) 2309.
V. Vargha and Gy. Kiss, J. Therm. Anal. Cal., 76 (2004) 295.
D. R. Bauer and G. F. Budde, J. Appl. Polym. Sci., 28 (2003) 253.
P. Kalenda and A. Kalendova, Pigm. Resin Technol., 31 (2002) 27.
J. K. Haken and M. R. Green, J. Chromatogr. A, 396 (1987) 121.
S. Tiwari, M. Saxena and Kumar Tiwari, J. Appl. Polym. Sci., 87 (2003) 110.
D. H. Solomon and J. J. Hopwood, J. Appl. Polym. Sci., 10 (1966) 981.
G. L. Marshall, Eur. Polym. J., 22 (1986) 217.
G. C. A. Amaral, M. S. Crespi, C. A. Ribeiro, M. Y. Hikosaka, L. S. Guinesi and A. F. Santos, J. Therm. Anal. Cal., 79 (2005) 375.
M. V. Alonso, M. Oliet, J. Garcia, F. Rodriguez and J. Echeverria, J. Therm. Anal. Cal., 86 (2006) 797.
N. Gabilondo, M. Lopez, J. A. Ramos, J. M. Echeverria and I. Mondragon, J. Therm. Anal. Cal., 90 (2007) 229.
M. Sanchez-Cabezudo, M. G. Prolongo, C. Salom and R. M. Masegosa, J. Therm. Anal. Cal., 86 (2006) 699.
G. Vázguez, F. López-Suevos, J. González-Alvarez., G. Antorrena, J. Therm. Anal. Cal. 82 (2005) 143.
A. Atarsia and R. Boukhili, Polym. Eng. Sci., 40 (2000) 607.
J. Filipović, J. Veličković, Z. Batalović and M. Trifunović, Thermochim. Acta, 149 (1989) 341.
R. Kay and A. R. Westwood, Eur. Polym. J., 11 (1975) 25.
J. M. Saiter, N. Delahaye, M. Liziard and L. Podgorski, J. Thermal Anal., 41 (1994) 1495.
X. Ramis and J. M. Salla, J. Polym. Sci. Polym. Phys., 35 (1997) 371.
T. Ozawa, Thermochim. Acta, 356 (2000) 173.
S. Prendžov and M. Prendžova, World of Polym., 1 (1998) 89.
J. Escribano, R. Masegosa, D. Nava, M. G. Prolongo and C. Salom, J. Therm. Anal. Cal., 86 (2006) 675.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jovičić, M.C., Radičević, R.Ž. & Budinski-Simendić, J.K. Curing of alkyds based on semi-drying oils with melamine resin. J Therm Anal Calorim 94, 143–150 (2008). https://doi.org/10.1007/s10973-008-9004-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-008-9004-4