Skip to main content
Log in

Influence of Polyhedral Oligomeric Silsesquioxanes (POSS) on Thermal and Mechanical Properties of Polydimethylsiloxane (PDMS) Composites Filled with Fumed Silica

  • Published:
Journal of Inorganic and Organometallic Polymers and Materials Aims and scope Submit manuscript

Abstract

A series of novel PDMS composites filled with a given amount of fumed silica were first prepared using divinyl-hexa[(trimethoxysilyl)ethyl]-POSS as cross-linker by hydrolytic condensation in the presence of organotin catalyst. The crosslinking reaction, the morphology, thermal behaviors and mechanical properties of the novel PDMS composites were characterized by attenuated total reflection infrared spectroscopy, scanning electron microscope, thermogravimetric analysis and universal tensile testing machine, respectively. It was found that the resistances to thermal degradation, thermo-oxidative decomposition of the novel PDMS composites were greatly improved by incorporation of POSS cross-linker, compared with that of the reference material (MT-1). Meanwhile, we also found that their thermal properties and mechanical properties were gradually enhanced with the further increment in loading amount of POSS cross-linker. The pronounced enhancements in thermal properties and mechanical properties of novel PDMS composites were likely attributed to the increasing interaction of PDMS chains and aggregated particles from synergistic effect between POSS and fumed silica.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. A.N. Chaudhry, N.C. Billingham, Polym. Degrad. Stabil. 73, 505 (2001)

    Article  CAS  Google Scholar 

  2. W. Zhou, H. Yang, X. Guo, J. Lu, Polym. Degrad. Stabil. 91, 1471 (2006)

    Article  CAS  Google Scholar 

  3. J.E. Mark, Acc. Chem. Res. 37, 946 (2004)

    Article  CAS  Google Scholar 

  4. J.P. Sheth, E. Yilgor, B. Erenturk, H. Ozhalici, I. Yilgor, G.L. Wilkes, Polymer 46, 8185 (2005)

    Article  CAS  Google Scholar 

  5. T.S. Radhakrishnan, J. Appl. Polym. Sci. 73, 441 (1999)

    Article  CAS  Google Scholar 

  6. M.A. Osman, A. Atallah, M. Müller, U.W. Suter, Polymer 42, 6545 (2001)

    Article  CAS  Google Scholar 

  7. M.M. Demir, Y.Z. Menceloglu, B. Erman, Polymer 46, 4127 (2005)

    Article  CAS  Google Scholar 

  8. L. Dewimille, B. Bresson, L. Bokobza, Polymer 46, 4135 (2005)

    Article  CAS  Google Scholar 

  9. C.L. Mangun, A.C. Mader, N.R. Sottos, S.R. White, Polymer 51, 4063 (2010)

    Article  CAS  Google Scholar 

  10. E. Yilgor, T. Eynur, C. Kosak, S. Bilgin, I. Yilgor, O. Malay, Y. Menceloglu, G.L. Wilkes, Polymer 52, 4189 (2011)

    Article  CAS  Google Scholar 

  11. A.C.C. Esteves, J. Brokken-Zijp, J. Lavèn, H.P. Huinink, N.J.W. Reuvers, M.P. Van, G. de With, Polymer 51, 136 (2010)

    Article  CAS  Google Scholar 

  12. K. Madhavan, B.S.R. Reddy, J. Appl. Polym. Sci. 113, 4052 (2009)

    Article  CAS  Google Scholar 

  13. D. Yang, W. Zhang, R. Yao, B. Jiang, Polym. Degrad. Stabil. 98, 109 (2013)

    Article  CAS  Google Scholar 

  14. Y. Zhang, Y. Mao, D. Chen, W. Wu, S. Yi, S. Mo, C. Huang, Polym. Degrad. Stabil. 98, 916 (2013)

    Article  CAS  Google Scholar 

  15. M.W. Simon, K.T. Stafford, D.L. Ou, J. Inorg. Organomet. Polym. Mater. 18, 364 (2008)

    Article  CAS  Google Scholar 

  16. G. Pan, J.E. Mark, D.W. Schaefer, J. Polym. Sci. B 41, 3314 (2003)

    Article  CAS  Google Scholar 

  17. L. Liu, M. Tian, W. Zhang, L. Zhang, J.E. Mark, Polymer 48, 3201 (2007)

    Article  CAS  Google Scholar 

  18. T.F. Baumann, T.V. Jones, T. Wilson, A.P. Saab, R.S. Maxwell, J. Polym. Sci. A 47, 2589 (2009)

    Article  CAS  Google Scholar 

  19. I.S. Isayeva, J.P. Kennedy, J. Polym. Sci. A 42, 4337 (2004)

    Article  CAS  Google Scholar 

  20. D. Chen, J. Nie, S. Yi, W. Wu, Y. Zhong, J. Liao, C. Huang, Polym. Degrad. Stabil. 95, 618 (2010)

    Article  CAS  Google Scholar 

  21. D. Chen, S. Yi, W. Wu, Y. Zhong, J. Liao, C. Huang, W. Shi, Polymer 51, 3867 (2010)

    Article  CAS  Google Scholar 

  22. D. Chen, S. Yi, P. Fang, Y. Zhong, C. Huang, X. Wu, React. Funct. Polym. 71, 502 (2011)

    Article  CAS  Google Scholar 

  23. R.H. Baney, M. Itoh, A. Sakakibara, T. Suzuki, Chem. Rev. 95, 1409 (1995)

    Article  CAS  Google Scholar 

  24. G.Z. Li, L.C. Wang, H.L. Ni, C.U. Pittman, J. Inorg. Organomet. Polym. Mater. 11, 123 (2001)

    Article  CAS  Google Scholar 

  25. M. Joshi, B.S. Butolaa, J. Macromol. Sci. Polym. Rev. 44, 389 (2004)

    Article  Google Scholar 

  26. Y.D. Zhang, S.H. Lee, M. Yoonessi, H. Toghiani, C.U. Pittman, J. Inorg. Organomet. Polym. Mater. 17, 159 (2007)

    Article  CAS  Google Scholar 

  27. S. Ando, Y. Someya, T. Takahashi, M. Shibata, J. Appl. Polym. Sci. 115, 3326 (2010)

    Article  CAS  Google Scholar 

  28. D. Hossain, F. Hagelberg, S. Saebo, C.U. Pittman, J. Inorg. Organomet. Polym. Mater. 20, 424 (2010)

    Article  CAS  Google Scholar 

  29. S.-W. Kuo, F.-C. Chang, Prog. Polym. Sci. 36, 1649 (2011)

    Article  CAS  Google Scholar 

  30. M.D. Hossain, Y. Yoo, K.T. Lim, J. Appl. Polym. Sci. 119, 936 (2011)

    Article  CAS  Google Scholar 

  31. A. Lungu, N.M. Sulca, E. Vasile, N. Badea, C. Parvu, H. Iovu, J. Appl. Polym. Sci. 121, 2919 (2011)

    Article  CAS  Google Scholar 

  32. D. Turan, H. Sirin, G. Ozkoc, J. Appl. Polym. Sci. 121, 1067 (2011)

    Article  CAS  Google Scholar 

  33. S. Spoljaric, R.A. Shanks, J. Appl. Polym. Sci. 126, E440 (2012)

    Article  CAS  Google Scholar 

  34. T.K. Minton, M.E. Wright, S.J. Tomczak, S.A. Marquez, L. Shen, A.L. Brunsvold, R. Cooper, J. Zhang, V. Vij, A.J. Guenthner, B.J. Petteys, ACS Appl. Mater. Interfaces 4, 492 (2012)

    Article  CAS  Google Scholar 

  35. K. Rozga-Wijas, J. Chojnowski, J. Inorg. Organomet. Polym. Mater. 22, 588 (2012)

    Article  CAS  Google Scholar 

  36. H. Abe, R. Note, H. Mizuseki, Y. Kawazoe, J. Habasaki, I. Tomita, J. Inorg. Organomet. Polym. 22, 845 (2012)

    Article  CAS  Google Scholar 

  37. H. Fan, J. He, R. Yang, J. Appl. Polym. Sci. 127, 463 (2013)

    Article  CAS  Google Scholar 

  38. Y. Qian, P. Wei, X. Zhao, P. Jiang, H. Yu, Fire Mater. 37, 1 (2013)

    Article  CAS  Google Scholar 

  39. D.Z. Chen, Y. Liu, C. Huang, Polym. Degrad. Stabil. 97, 308 (2012)

    Article  CAS  Google Scholar 

  40. N. Roy, A.K. Bhowmick, Polymer 51, 5172 (2010)

    Article  CAS  Google Scholar 

  41. Y.M. Han, J.Y. Zhang, L. Shi, S.C. Qi, J. Cheng, R.G. Jin, Polym. Degrad. Stabil. 93, 242 (2008)

    Article  CAS  Google Scholar 

  42. H. Liu, S. Zheng, K. Nie, Macromolecules 38, 5088 (2005)

    Article  CAS  Google Scholar 

Download references

Acknowledgments

This research has received financial supports from both the Foundation of Wuhan Textile University (No. 115027) and the National Natural Science Foundation of China No. 51203123.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Dongzhi Chen.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Chen, D., Liu, Y., Zhang, H. et al. Influence of Polyhedral Oligomeric Silsesquioxanes (POSS) on Thermal and Mechanical Properties of Polydimethylsiloxane (PDMS) Composites Filled with Fumed Silica. J Inorg Organomet Polym 23, 1375–1382 (2013). https://doi.org/10.1007/s10904-013-9939-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10904-013-9939-1

Keywords

Navigation