Abstract
Conventional inventory models mostly cope with a known demand and adequate supply, but are not realistic for many industries. In this research, the fuzzy inference system (FIS) model, FIS with artificial neural network (ANN) model and FIS with adaptive neuro-fuzzy inference system (ANFIS) model in which both supply and demand are uncertain were applied for the inventory system. For FIS model, the generated fuzzy rules were applied to draw out the fuzzy order quantity continuously. The order quantity was adjusted according to the FIS model with the evaluation algorithm for the inventory model. The output of FIS model was also used as data for FIS + ANN and FIS + ANFIS models. The FIS + ANFIS model was studied with three membership functions; trapezoidal and triangular (Trap), Gaussian and bell shape. Inventory costs of the proposed models were compared with the stochastic economic order quantity (EOQ) models based on previous data of a case study factory. The results showed that the FIS + ANFIS_Gauss model gave the best performance of total inventory cost saving by more than 75 % compared to stochastic EOQ model.













Similar content being viewed by others
References
Aengchuan, P., & Phruksaphanrat, B. (2013). Inventory system design by fuzzy logic control: A case study. Advanced Materials Research, 8, 619–624.
Andriolo, A., Battini, D., Grubbstrom, R. W., & Persona, A. (2014). A century of evolution from Harris’s basic lot size model: Survey and research agenda. The International Journal of Production Economics, 155, 16–38.
Aloulou, M. A., Dolgui, A., & Kovalyov, M. Y. (2014). A bibliography of non-deterministic lot-sizing models. International Journal of Production Research, 52(8), 2293–2310.
Azedegan, A., Porobic, L., Ghazinoory, S., Samouei, P., & Kheirkhah, A. S. (2011). Fuzzy logic in manufacturing: A review of literature and a specialized application. International Journal of Production Economics, 132(2), 258–270.
Azizi, A., Ali, A. Y., & Ping, L. W. (2013). An adaptive neuro-fuzzy inference system for a dynamic production environment under uncertainties. World Applied Sciences Journal, 25(3), 428–433.
Bai, Y., & Wang, D. (2006). Fundamentals of Fuzzy Logic Control–Fuzzy Sets, Fuzzy Rules and Defuzzifications. In Advanced Fuzzy Logic Technologies in Industrial Applications (pp. 17–36). Springer London.
Camastra, F., Ciaramella, A., Giovannelli, V., Lener, M., Rastelli, V., Staiano, A., et al. (2015). A fuzzy decision system for genetically modified plant environmental risk assessment using Mamdani inference. Expert Systems with Applications, 42, 1710–1716.
Castillo, O., & Melin, P. (2008). Type-2 fuzzy logic theory and applications. Berlin: Springer.
Chaudhary, H., Panwar, V., Prasad, R., & Sukavanam, N. (2014). Adaptive neuro fuzzy based hybrid force/position control for an industrial robot manipulator. Journal Of Intelligent Manufacturing. doi:10.1007/s10845-014-0952-1.
Chede, B., Jain, C. K., Jain, S. K., & Chede, A. (2012). Fuzzy logic analysis based on inventory considering demand and stock quantity on hand. Industrial Engineering Letters, 2(1), 13–21.
Chen, S. P. (2011). A membership function approach to lot size re-order point inventory problems in fuzzy environments. International Journal of Production Research, 49(13), 3855–3871.
Chen, S. H., Wang, C. C., & Ramer, A. (1996). Backorder fuzzy inventory model under function principle. Information Sciences, 95, 71–79.
Chung, C. J., Widyadana, G. A., & Wee, H. M. (2011). Economic production quantity model for deteriorating inventory with random machine unavailability and shortage. International Journal of Production Research, 49(3), 883–902.
Esen, H., Inalli, M., Sengur, A., & Esen, M. (2008a). Forecasting of a ground-coupled heat pump performance using neural networks with statistical data weighting pre-processing. International Journal of Thermal Sciences, 47(4), 431–441.
Esen, H., Inalli, M., Sengur, A., & Esen, M. (2008b). Performance prediction of a ground-coupled heat pump system using artificial neural networks. Expert Systems with Applications, 35, 1940–1948.
Esen, H., Inalli, M., Sengur, A., & Esen, M. (2008c). Modelling a ground-coupled heat pump system using adaptive neuro-fuzzy inference systems. International Journal of Refrigeration, 31(1), 65–74.
Esen, H., Inalli, M., Sengur, A., & Esen, M. (2008d). Artificial neural networks and adaptive neuro-fuzzy assessments for ground-coupled heat pump system. Energy and Buildings, 40(6), 1074–1083.
Esen, H., Inalli, M., Sengur, A., & Esen, M. (2008e). Predicting performance of a ground-source heat pump system using fuzzy weighted pre-processing-based ANFIS. Building and Environment, 43(12), 2178–2187.
Esen, H., Ozgen, F., Esen, M., & Sengur, A. (2009). Artificial neural network and wavelet neural network approaches for modelling of a solar air heater. Expert Systems with Applications, 36(8), 11240–11248.
Feng, G. (2010). Integrating dynamic pricing and replenishment decisions under supply capacity uncertainty. Management Science, 56(2), 2154–2172.
Fragiadakis, N. G., Tsoukalas, V. D., & Papazoglou, V. J. (2014). An adaptive neuro-fuzzy inference system (anfis) model for assessing occupational risk in the shipbuilding industry. Safety Science, 63, 226–235.
Glock, C. H., Grosse, E. H., & Ries, J. M. (2014). The lot sizing problem: A tertiary study. The International Journal of Production Economics, 155, 39–51.
Gokulachandran, J., & Mohandas, K. (2015). Comparative study of two soft computing techniques for the prediction of remaining useful life of cutting tools. Journal of Intelligent Manufacturing, 26, 255–268. doi:10.1007/s10845-013-0778-2.
Good, P. I. (1999). Resampling methods: A practical guide to data analysis. Boston: Birkhauser.
Grubbstrom, R. W. (2014). Dynamic lot sizing with a finite production rate. International Journal of Production Economics’s, 149, 68–79.
Guan, Y. (2011). Stochastic lot-sizing with backlogging: Computational complexity analysis. Journal of Global Optimization’s, 49, 651–678.
Guillaume, R., Kobylanski, P., & Zielinski, P. (2012). A robust lot sizing problem with ill-known demands. Fuzzy Sets and Systems, 206, 39–57.
Guner, H. A. A., & Yumuk, H. A. (2014). Application of a fuzzy inference system for the prediction of long shore sediment transport. Applied Ocean Research, 48, 162–175.
Guneri, A. F., Ertay, T., & Yucel, A. (2011). An approach based on ANFIS input selection and modeling for supplier selection problem. Expert Systems with Applications, 38, 14907–14917.
Handfield, R., Warsing, D., & Wu, X. (2009). (Q, r) Inventory policies in a fuzzy uncertain supply chain environment. European Journal of Operational Research, 197, 609–619.
Harris, F. H. (1913). How many parts to make at once. Factory, The Magazine of Management, 10(2), 135–136, 152.
Hosoz, M., Ertunc, H. M., & Bulgurcu, H. (2011). An adaptive neuro-fuzzy inference system model for predicting the performance of a refrigeration system with a cooling tower. Expert Systems with Applications, 38, 14148–14155.
Jang, J. S. R. (1993). ANFIS: Adaptive-network-based fuzzy inference system. IEEE Transactions on Systems, Man, Cybernetics, 23, 665–685.
Jha, M. N., Pratihar, D. K., Bapat, A. V., Dey, V., Ali, M., & Bagchi, A. C. (2014). Knowledge-based systems using neural networks for electron beam welding process of reactive material (Zircaloy-4). Journal of Intelligent Manufacturing, 25, 1315–1333. doi:10.1007/s10845-013-0732-3.
Kamal, L., & Sculfort, J.-L. (2007). Fuzzy modelling of inventory control system in uncertain environment. International Symposium on Logistics and Industrial Informatics, 53–57. doi:10.1109/LINDI.2007.4343512.
Kang, H.-Y., & Lee, A. H. I. (2013). A stochastic lot-sizing model with multi-supplier and quantity discounts. International Journal of Production Research, 51(1), 245–263.
Khan, M., Jaber, M. Y., & Wahab, M. I. M. (2010). Economic order quantity model for items with imperfect quality with learning in inspection. International Journal of Production Economics, 124(1), 87–96.
Kiran, T. R., & Rajput, S. P. S. (2011). An effectiveness model for an indirect evaporative cooling (IEC) system: Comparison of artificial neural networks (ANN), adaptive neuro-fuzzy inference system (ANFIS) and fuzzy inference system (FIS) approach. Applied Soft Computing, 11, 3525–3533.
Kocyigit, N. (2015). Fault and sensor error diagnostic strategies for a vapor compression refrigeration system by using fuzzy inference systems and artificial neural network. The International Journal of Refrigeration, 50, 69–79.
Kovac, P., Rodic, D., Pucovsky, V., Savkovic, B., & Gostimirovic, M. (2013). Application of fuzzy logic and regression analysis for modeling surface roughness in face milliing. Journal of Intelligent Manufacturing, 24, 755–762. doi:10.1007/s10845-012-0623-z.
Kuo, C.-F. J., Hsu, C.-T. M., Liu, Z.-X., & Wu, H.-C. (2014). Automatic inspection system of LED chip using two-stages back-propagation neural network. Journal of Intelligent Manufacturing, 25, 1235–1243. doi:10.1007/s10845-012-0725-7.
Kuo, R. J., Tseng, Y. S., & Chen, Z.-Y. (2014). Integration of fuzzy neural network and artificial immune system-based back-propagation neural network for sales forecasting using qualitative and quantitative data. Journal Of Intelligent Manufacturing. doi:10.1007/s10845-014-0944-1.
Lee, H., & Yao, J. (1999). Economic order quantity in fuzzy sense for inventory without backorder model. Fuzzy Sets and Systems, 105(1), 13–31.
Lee, S.-D., Yang, C.-M., & Lan, S.-C. (2014). Economic lot sizing in a production system with random demand. International Journal of Systems Science. doi:10.1080/00207721.2014.915354.
Lenart, B., Grzybowska, K., & Cimer, M. (2012). Adaptive inventory control in production systems. In E. Corchado et al. (Eds.), HAIS 2012, Part II, LNCS. 7209. Springer: Berlin, Heidelberg (pp. 222–228).
Li, H., & Thorstenson, A. (2014). A multi-phase algorithm for a joint lot-sizing and pricing problem with stochastic demands. International Journal of Production Research, 52(8), 2345–2362.
Mahata, G. C., & Goswami, A. (2013). Fuzzy inventory models for items with imperfect quality and shortage backordering under crisp and fuzzy decision variables. Computer & Industrial Engineering, 64, 190–199.
Mamdani, E. H., & Assilian, S. (1975). An experiment in linguistic synthesis with fuzzy logic controller. International Journal of Man-Machine Studies, 7, 1–13.
Melin, P., Soto, J., Castillo, O., & Soria, J. (2012). A new approach for time series prediction using ensembles of ANFIS models. Expert Systems with Applications, 39, 3494–3506.
Meredith, J., & Shafer, S. (2011). Operations management (4th ed.). Hoboken: Wiley.
Mondal, S., & Maiti, M. (2002). Multi-item fuzzy EOQ models using genetic algorithm. Computers & Industrial Engineering, 44(1), 105–117.
Nasrollahzadeh, K., & Basiri, M. M. (2014). Prediction of shear strength of FRP reinforced concrete beams using fuzzy inference system. Expert Systems with Applications, 41, 1006–1020.
Park, K. S. (1987). Fuzzy set theoretic interpretation of economic order quantity. IEEE Transactions on Systems, Man and Cybernetics, 6(17), 1082–1084.newpage
Parlar, M., & Perry, D. (1995). Analysis of a (Q, r, T) inventory policy with deterministic and random yields when future supply is uncertain. European Journal of Operational Research, 84, 431–443.
Phootrakornchai, W., & Jiriwibhakorn, S. (2015). Online critical clearing time estimation using an adaptive neuro-fuzzy inference system (ANFIS). Electrical Power and Energy Systems, 73, 170–181.
Porteus, E. L. (1986). Optimal lot sizing, process quality improvement and setup cost reduction. Operations Research, 34(1), 137–144.
Razani, M., Yazdani-Chamzini, A., & Yakhchali, S. H. (2013). A novel fuzzy inference system for predicting roof fall rate in underground coal mines. Safety Science, 55, 26–33.
Rong, L. (2010). Uncertain economic order quantity model with uncertain costs. Journal of Information and Computational Science, 7(13), 2723–2730.
Rothstein, A. P., & Rakityanskaya, A. B. (2006). Inventory control as an identification problem based on fuzzy logic. Cybernetics and Systems Analysis, 42(3), 411–419.
Samanta, B., & Al-Araimi, S. A. (2001). An inventory control model using fuzzy logic. The International Journal of Production Economics, 73, 217–226.
Samanta, B., & Al-Araimi, S. A. (2003). Application of an adaptive neuro-fuzzy inference system in inventory control. International Journal of Smart Engineering System Design, 5(4), 547–553.
Sana, S. S. (2011). Price-sensitive demand for perishable items—An EOQ model. Applied Mathematics and Computation, 217(13), 6248–6259.
Seneyigit, E., & Erol, R. (2010). New lot sizing heuristics for demand and price uncertainties with service-level constraint. International Journal of Production Research, 48(1), 21–44.
Silver, E. A., & Meal, H. A. (1973). A heuristic for selecting lot sizing requirements for the case of a deterministic time varying demand rate and discrete opportunities for replenishment. Production and Inventory Management, 14(2), 64–74.
Sommer, G. (1981). Fuzzy inventory scheduling. In G. Lasker (Ed.), Applied systems and cybernetics. New York: Pergamon Press.
Sumathi, S., & Paneerselvam, S. (2010). Computational intelligence paradigms: Theory and applications using MATLAB. Boca Raton, FL: CRC Press, Inc.
Taft, E. W. (1918). The most economical production lot. The Iron Age, 101, 1410–1412.
Tanthatemee, T., & Phruksaphanrat, B. (2012). Fuzzy inventory control for uncertain demand and supply. Proceedings of the International MultiConference of Engineers and Scientists, 2, 1224–1229.
Tsai, K.-M., & Luo, H.-J. (2014). An inverse model for injection molding of optical lens using artificial neural network coupled with genetic algorithm. Journal of Intelligent Manufacturing. doi:10.1007/s10845-014-0999-z
Ullah, M., & Kang, C. W. (2014). Effect of rework, rejects and inspection on lot size with work-in-process inventory. International Journal Production Research, 52(8), 2448–2460.
Wagner, H. M., & Whitin, T. M. (1958). Dynamic version of the economic lot size model. Manangement Science, 5(1), 89–96.
Wang, B., Man, T., & Jin, H. (2015). Prediction of expansion behavior of self-stressing concrete by artificial neural networks and fuzzy inference systems. Construction and Building Materials, 84, 184–191.
Wang, C.-H. (2010). Some remarks on an optimal order quantity and reorder point when supply and demand are uncertain. Computers & Industrial Engineering, 58, 809–813.
Wee, H. M., & Widyadana, G. A. (2012). Economic production quantity models for deteriorating items with rework and stochastic preventive maintenance time. International Journal Production Research, 50(11), 2940–2952.
Yang, L., & Entchev, E. (2014). Performance prediction of a hybrid microgeneration system using adaptive neuro-fuzzy inference system (ANFIS) technique. Applied Energy, 134, 197–203.
Yang, W.-A., & Zhou, W. (2013). Autoregressive coefficient-invariant control chart pattern recognition in autocorrelated manufacturing processes using neural network ensemble. Journal of Intelligent Manufacturing. doi:10.1007/s10845-013-0847-6
Yimer, A.D., & Demirli, K. (2004). Fuzzy modeling and simulation of single item inventory system with variable demand. IEEE annual meeting of the North American fuzzy information processing society Banff, 2, Alberta, Canada (pp. 985–989).
Ying, L. C., & Pan, M. C. (2008). Using adaptive network based fuzzy inference system to forecast regional electricity loads. Energy Conversation and Management, 49, 205–211.
Acknowledgments
This research was supported by Faculty of Engineering, Thammasat University.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Aengchuan, P., Phruksaphanrat, B. Comparison of fuzzy inference system (FIS), FIS with artificial neural networks (FIS + ANN) and FIS with adaptive neuro-fuzzy inference system (FIS + ANFIS) for inventory control. J Intell Manuf 29, 905–923 (2018). https://doi.org/10.1007/s10845-015-1146-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10845-015-1146-1