Abstract
A spacecraft consists of various components which will function with maximum efficiency only when their operating temperature is maintained within certain specified ranges. Passive thermal control elements play an important role in maintaining the temperature of spacecraft components within the specified ranges by suitable selection of thermo-optical properties of the surfaces namely absorptance and emittance. Plasma electrolytic oxidation of AA 6061 is studied as a method to develop a solar reflector coating for space applications. The coatings are developed by making use of a silicate-based electrolyte. The influence of electrolyte composition, average current density, processing time, positive on-time and pulse frequency on the thermo-optical behaviour of the coating is studied. The thickness of the PEO coating is optimized so as to attain thermo-optical properties similar or better than conventional sulphuric acid anodizing. The optimized coating is subjected to adhesion and humidity tests as well as various space simulation tests such as thermal cycling and thermo-vacuum performance tests to evaluate the suitability of the coating as a thermal control surface for space application. Coatings obtained by PEO process and conventional sulphuric acid anodizing are further characterized using SEM, EDX, XPS, XRD and nanoprofilometry to have a comparative study of their morphology, microstructure and composition.
Graphical abstract
Similar content being viewed by others
References
Kraus Allan D, Bar-Cohen Avram (1983) Thermal analysis and control of electronic equipment. McGraw-Hill, New York
Barg G, Djordjevic N, Hall S (1988) The development of Prometheus: an expert system tool for preliminary design of spacecraft thermal control systems from the Proceedings of the first international conference on Industrial and Engineering applications of artificial intelligence and Expert Systems. ACM Press: 380–387
Joseph G (2015) Chapter 10-Journey from ground to space from a system engineer’s guide to building an earth observation camera. CRC Press: 303–325
Gilmore DG (2002) Spacecraft thermal control handbook, 2nd edn. The Aerospace Corporation Press, El Segundo
Karam RD (1998) Satellite thermal control for system engineers. In: Zarchan P (ed) Progress in astronautics and aeronautics, 181st edn. AIAA, Cambridge
Meseguer J, Pérez-Grande I, Sanz-Adréz A (2012) Spacecraft Thermal Control. Woodhead Publishing, Cambridge
Sharma AK, Bhojraj H, Kaila VK, Narayanamurthy H (1997) Anodizing and inorganic black coloring of aluminum alloys for space applications. Metal Finish 95(12):14–20
Wernick S, Pinner R, Sheasby PG (1987) The surface treatment and finishing of aluminium and its alloys, 5th edn. ASM International, Materials Park
Henninger JH (1984) Solar absorptance and thermal emittance of some common spacecraft thermal-control coatings. Imprint: National Aeronautics and Space Administration, Scientific and Technical Information Branch, Washington DC
Siva Kumar C, Sharma AK, Mahendra KN, Mayanna SM (2000) Studies on anodic oxide coating with low absorptance and high emittance on aluminum alloy 2024. Sol Energy Mater Sol Cells 60:51–57
Shao L, Li H, Jiang B, Liu C, Gu X, Chen D (2018) A comparative study of corrosion behavior of hard anodized and micro arc oxidation coatings on 7050 aluminium alloy. Metals 8(3):165. https://doi.org/10.3390/met8030165
Rama Krishna L, Sudha Purnima A, Sundararajan G (2006) A comparative study of tribological behavior of microarc oxidation and hard-anodized coatings. Wear 261:1095–1101
Yerokhin AL, Nie X, Leyland A, Matthews A, Dowey SJ (1999) Plasma electrolysis for surface engineering. Surf Coat Technol 122:73–93
Walsh FC, Low CTJ, Wood RJK, Stevens KT, Archer J, Poeton AR, Ryder A (2009) Plasma electrolytic oxidation (PEO) for production of anodised coatings on lightweight metal (Al, Mg, Ti) alloys. Trans Inst Met Finish 87:122–135
Zhang Y, Fan W, Du HQ, Zhao YW (2017) Plasma electrolytic oxidation coatings for aluminum alloys. Mater Perform 56(9):38–41
Matykina E, Arrabal R, Mohedano M, Mingo B, Gonzalez J, Pardo A, Merino MC (2017) Recent advances in energy efficient PEO processing of aluminium alloys. Trans Nonferrous Met Soc China 27(7):1439–1454
Martin J, Nomine A, Ntomprougkidis V, Migot S, Bruyere S, Soldera F, Belmonte T, Henrion G (2019) Formation of a metastable nanostructured mullite during Plasma Electrolytic Oxidation of aluminium in Soft regime condition. Mater Des 180:10797
Chen Q, Li W, Ling K, Yang R (2019) Investigation of growth mechanism of plasma electrolytic oxidation coating on Al-Ti double layer composite plate. Materials 12:272. https://doi.org/10.3390/ma12020272
Clyne TW, Troughton SC (2018) A recent work on discharge characteristics during plasma electrolytic oxidation of various metals. Int Mater Rev 64(3):127–162
Shrestha S, Dunn BD (2007) Advanced plasma electrolytic oxidation treatment for protection of lightweight materials and structures in a space environment. Surface World 11:40–44
Mısırlı C, Şahin M, Sözer U Effect of micro arc oxidation coatings on the properties of aluminium alloys. Chapter 4 of aluminium alloys-new trends in fabrication and applications published by INTECH http://dx.doi.org/10.5772/53135
Dehnavi Vahid, Luan Ben Li, Liu Xing Yang, Shoesmith David W, Rohani Sohrab (2015) Correlation between plasma electrolytic oxidation treatment stages and coating microstructure on aluminum under unipolar pulsed DC mode. Surf Coat Technol 269:91–99
Hussein RO, Nie X, Northwood DO (2013) An investigation of ceramic coating growth mechanisms in plasma electrolytic oxidation (PEO) processing. Electrochim Acta 112:111–119
Pezzato L, Rigon M, Martucci A, Brunelli K, Katya D, Dabala M (2019) Plasma electrolytic oxidation (PEO) as pre-treatment for sol-gel coating on aluminium and magnesium alloys. Surf Coat Technol 366:114–123
Somasundaram Soniya, Pillai Anju M, Rajendra A, Aravindram P, Murali Krishna P, Sharma AK (2018) Space qualification and characterization of high emittance black nickel coating on copper and stainless-steel substrates. Sol Energy Mater Sol Cells 174:163–171
Pillai Anju M, Rajendra A, Sharma AK (2012) Pulse electrodeposition of nanocrystalline nickel on AA6061 for space applications. Trans Inst Metal Finish 90(1):44–51
Sharma AK (2005) Surface engineering for thermal control of spacecraft. Surf Eng 21(3):249–253
Griffin MD, French JR (2004) Spacecraft environment. Chapter 3 of space vehicle design. 2nd. American Institute of Aeronautics and Astronautics, Inc., Reston, ISBN 1-56347-539-l
Liu YJ, Xu JY, Lin W, Gao C, Zhang JC, Chen XH (2013) Effects of different electrolyte systems on the formation of micro-arc oxidation ceramic coatings of 6061 aluminum alloy. Rev Adv Mater Sci 33:126–130
Dehnavi V (2014) Surface modification of aluminum alloys by plasma electrolytic oxidation. Thesis from The University of Western Ontario
Hussein RO, Nie X, Northwood DO, Yerokhin A, Matthews A (2010) Spectroscopic study of electrolytic plasma and discharging behaviour during the plasma electrolytic oxidation (PEO) process. J Phys D 43:105203. https://doi.org/10.1088/0022-3727/43/10/105203
Hussein RO, Northwood DO, Nie X (2010) Coating growth behavior during the plasma electrolytic oxidation process. J Vac Sci Technol, A 28:766–773
Alwitt RS, Xu J, Mcclung RC (1993) Stresses in sulfuric acid anodized coatings on aluminum. Electrochem Soc 140(5):1241–1246
Shahzad Majid, Chaussumier Michel, Chieragatti Rémy, Mabru Catherine, Rezai-Aria Farhad (2012) Effect of sealed anodic film on fatigue performance of 2214-T6 aluminum alloy. Surf Coat Technol 206:2733–2739
Zhu Yuan Yuan, Ding Gu Qiao, Ding Jian Ning, Yuan Ning Yi (2010) AFM, SEM and TEM studies on porous anodic alumina. Nanoscale Res Lett 5(4):725–734
He CC, Heslin TH (1995) Preventing cracking of anodized coatings. NASA Technical Memorandum 104622, Goddard Space Flight Center, Greenbelt
Yong-jun Guan, Yuan Xia (2006) Correlation between discharging property and coatings microstructure during plasma electrolytic oxidation. Trans Nonferrous Met Soc China 16:1097–1102
Khan RHU, Yerokhin AL, Pilkington T, Leyland A, Matthews A (2005) Residual stresses in plasma electrolytic oxidation coatings on Al alloy produced by pulsed unipolar current. Surf Coat Technol 200:1580–1586
Datcheva Maria, Cherneva Sabina, Stoycheva Maria, Iankov Roumen, Stoychev Dimitar (2011) Determination of anodized aluminum material characteristics by means of nanoindentation measurements. Mater Sci Appl 2:1452–1464
Abdel-Salam Omar E, Shoeib Madiha A, Elkilany Hagar Ashour (2017) Characterization of the hard-anodizing layers formed on 2014-T3 Al alloy in sulphuric acid electrolyte containing sodium lignin sulphonate. Egypt J Petrol. https://doi.org/10.1016/j.ejpe.2017.07.014
Cheng Tsung-Chieh, Chou Chu-Chiang (2015) The electrical and mechanical properties of porous anodic 6061-T6 aluminum alloy oxide film. J Nanomater. https://doi.org/10.1155/2015/371405
Reddy N, Bera P, Reddy VR, Sridhara N, Dey A, Anandan C, Sharma AK (2014) XPS study of sputtered alumina thin films. Ceramic Int 40:11099–11107
Podder J, Evitts RW, Besant RW (2014) Effect of lead chloride on the growth and surface properties of potassium chloride crystals from aqueous solutions. Surf Rev Lett, 21 Article No. 1450054
Hughes AE, Hedges MM, Sexton BA (1990) Reactions at the Al/SiO2/SiC layered interface. J Mater Sci 25:4856–4865
Lakshmi RV, Bera P, Anandan C, Basu BJ (2014) Effect of the size of silica nanoparticles on wettability and surface chemistry of sol–gel superhydrophobic and oleophobic nanocomposite coatings. Appl Surf Sci 320:780–786
Acknowledgements
The authors express their sincere gratitude to Dr. Parthasarathy Bera, National Aerospace Laboratories, Bangalore, for conducting detailed XPS analysis of the samples and interpreting the data.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Pillai, A.M., Rajendra, A., Sharma, A.K. et al. Development of a solar reflector coating on AA6061 alloy by plasma electrolytic oxidation. J Appl Electrochem 49, 1239–1254 (2019). https://doi.org/10.1007/s10800-019-01362-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10800-019-01362-7