Abstract
The selection of an equivalent circuit that faithfully models the steel–concrete interface response to the application of electrical signals is a fundamental aspect of the electrochemical determination of reinforcement corrosion rate. Experimental evidence is provided in favour of using a modified Randles circuit in which the corroding interface is characterised by a parallel combination of a constant phase element and a charge transfer resistance in series with a Warburg element. An advantage of having an appropriate model of the steel–concrete system is the possibility of carrying out studies of quality of the information that is extracted from the experimental data. A sensitivity-algorithm is applied with the object of identification of the conditions in which the system’s response is dominated by certain parameters or combinations of them.
Similar content being viewed by others
References
C.L. Page K.W.J. Treadaway P.B. Bamforth (Eds) (1990) Corrosion of Reinforcements in Concrete Elsevier Applied Science London
J.A. González S. Feliu P. Rodríguez E. Ramírez C. Alonso C. Andrade (1996) Mater. Struct. 29 97
J.A. González S. Feliu P. Rodríguez (1997) Corrosion 53 65
W. Morris A. Vico M. Vázquez (2003) J. Appl. Electrochem. 33 1183
M. Stern A.L. Geary (1957) J. Electrochem. Soc. 104 56
D.L. Dawson D.G. John M.I. Jafar K. Hladky L. Sherwood (1990) Electrochemical methods for the inspection and monitoring of corrosion of reinforcing steel in concrete C.L. Page K.W.J. Treadaway P.B. Bamforth (Eds) ‘Corrosion of Reinforcements in Concrete’ Elsevier Applied Science London 358–371
P. Rodríguez E. Ramírez J.A. González (1994) Magazine of Concrete Research 46 IssueID167 81
S. Feliu J.A. González C. Andrade (1996) Electrochemical methods for on-site determination of corrosion rates of rebars N.S. Barke E. Escalante Ch.K. Nmai D. Whiting (Eds) ‘Techniques to Asses the Corrosion Activity of Steel Reinforced Concrete Structures’ ASTM STP 1276 American Society for Testing Materials Philadelphia 107–118
V. Feliu S. Feliu (1997) J. Electroanal. Chem. 435 1
V. Feliu J.A. González C. Andrade S. Feliu (1998) Corros. Sci. 40 975
V. Feliu A. Cobo J.A. González S. Feliu (2002) Corrosion 58 72
J.A. González A. Cobo M.N. González S. Feliu (2001) Corros. Sci. 43 611
P. Agarwal M.E. Orazem L.H. García-Rubio (1992) J. Electrochem. Soc. 139 1917
C.J. Newton J.M. Sykes (1988) Corros. Sci. 28 1051
D.W. Law S.G. Millard J.H. Bungey (2000) Corrosion 56 48
A.A. Sagües S.C. Kranc E.I. Moreno (1995) Corros. Sci. 37 1097
N. Birbilis K.M. Nairn M. Forsyth (2003) Corros. Sci. 45 1895
V. Feliu J.A. González S. Feliu (2004) J. Electrochem. Soc. 151 B 134
L. Cui P.Y. Yan (2000) Corros. Sci. 42 675
B.A. Boukamp (1986) Solid State Ionics 18/19 136
B.A. Boukamp (1986) Solid State Ionics 20 31
J.R. Macdonald L.D.Jr. Potter (1987) Solid State Ionics 23 61
G.W. Walter D.N. Nguyen M.A.D. Madurasinghe (1992) Electrochim. Acta 37 245
G.K. Glass A.M. Hassaneim N.R. Buenfeld (1998) Electrochim. Acta 43 1863
L. Ljung (1999) System Identification Prentice Hall New Jersey
H.F. Weinberger (1970) Partial Differential Equations Blaisdell Publishing Co New York
P.P.J. van den Bosch A.C. van der Klauw (1994) Modelling, Identification and Simulation of Dynamical Systems CRC Press Boca Ratón, Florida
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Feliu, V., Gonzàlez, J. & Feliu, S. Modelling of the steel–concrete interface to obtain information on reinforcement bar corrosion. J Appl Electrochem 35, 429–436 (2005). https://doi.org/10.1007/s10800-004-8348-0
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10800-004-8348-0