Abstract
Spatial ability has been confirmed to be of particular importance for successful engineering graphics education and to be a component of human intelligence that can be improved through instruction and training. Consequently, the creation and communication by means of graphics demand careful development of spatial skills provided by the balanced curricula based on the research results in multi disciplinary area. The approach to engineering graphics education had been transformed to meet spatial skills improvement even before significant and fast changes arose from the development of computer technology enabling the engineer powerful tools and techniques. The correlation and interference between new technologies widely introduced in engineering graphics education and spatial ability/skills, have initiated new studies to establish the basis of holistic engineering graphics education. This paper presents the overview of some efforts and possible answers resulting from intensive research into spatial ability and skills and their implementation in the conception of graphics education in engineering environment.
Similar content being viewed by others
References
Angelov, A. N., Smieja, T & Styczynski, Z. (2007). New training programs in power engineering using VMRL visualization methods. In Proceedings of the 19th international conference on electricity distribution, Vienna, Austria, CIRED2007 Session 6.
Barnea, N. (2000). Teaching and learning about chemistry and modelling with a computer managed modelling system. In J. K. Gilbert & C. J. Boulter (Eds.), Developing models in science education. Dordrecht: Kluwer Academic.
Barr, R. E. (1999). Planning the EDG curriculum for the 21st century. Engineering Design Graphics Journal, 63(2), 4–12.
Barr, R. E., Krueger, T. J., & Aanstoos, T. A. (2002). The New digital engineering design and graphics process. Engineering Graphics Journal, 66(3), 6–11.
Bertoline, G. R. (1999). Introduction to Graphics communications for engineers. New York: WCB McGraw–Hill.
Bertoline, G. R., & Wiebe, E. (2005). Fundamentals of graphics communication. New York: McGraw Hill Higher Education.
Branoff, T. J., Hartman, N. W., & Wiebe, E. N. (2002). Constraint-based, three-dimensional solid modeling in an introductionary engineering graphics course: re-examining the curriculum. Engineering Design Graphics Journal, 66(1), 5–10.
Braukmann, J. (1991). A Comparison of two methods of teaching visualization skills to college students, Doctoral Disertation, University of Idaho.
Chevalier, A. (2003). Guide du dessinateur industriel. Paris: Hachette Technique.
Confederation of eu rectors’ conferences and the association of European universities (CRE). (1999). The bologna declaration on the European space for higher education: an explanation. http://ec.europa.eu/education/policies/educ/bologna/bologna.pdf. Accessed 06 March 2012.
Contero, M., Naya. F., Company, P., Saorin, J. L., & Contesa, J. (2005). Improving visualization skills in engineering education. IEEE Computer Graphics and Applications, 25(5), 24–31.
Contero, M., Company, P., Saorin, J. L., & Naya, F. (2006). Learning support tools for developing spatial ability in engineering design. International Journal of Engineering Education, 22(3), 470–477.
Crown, S. W. (2003). Enhancing the engineering design process with virtual reality VRML world. In Proceedings of the 2003 American Society for engineering education annual conference & exposition, Nashville, 2003.
Czapka, J. T, Moeinzadeh M. H., & Lake, J. M. (2002). Application of rapid prototyping technology to improve spatial visualization. In Proceedings of the 2002 American Society for engineering education annual conference & exposition, 2002.
Eliot, J., & Smith, I. M. (1983). An international directory of spatial tests. Windsor: The NFER-Nelson Publishing Company Ltd.
Ferguson, E. S. (1992). Engineering and the mind’s eye. Cambridge, MA: The MIT Press.
Frey, G., & Baird, D. (2000). Does rapid prototyping improve student visualization skills. Journal of Industrial Technology, 16(4), 2–6.
Gardner, H. (1983). Frames of mind. New York: Basic Books.
Gaughran, B. et al. (2012) To investigate the effectiveness of 3D computer modelling in the development of visualisation skills. The University of Limerick. http://www3.ul.ie/tilde_accs/mearsa/www/9519211/genises.htm. Accessed 16 Feb 2012.
Giesecke, F. E., et al. (1998). Engineering graphics. Upper Saddle River: Prentice Hall.
Giesecke, F. E., et al. (2002). Technical drawing. Upper Saddle River: Prentice Hall.
Godfry, G. S. (1999) Three-dimensional visualization using solid-model methods: A comparative study of engineering and technology students (doctoral dissertation, Northern Illinois University, 1999). Dissertation abstracts international, 60, 4390.
Grinter, L. E., et al. (1955). Report of the committee on evaluation of engineering education. Journal of Engineering Education, 46, 25–60.
Hegarty, M. (2004). Diagrams in the mind and in the world: Relations between internal and external visualizations. In A. Blackwell, K. Mariott, & A. Shimojima (Eds.), Diagrammatic representation and inference. Lecture notes in artificial intelligence (p. 2980). Berlin: Springer.
Hegarty, M. (2007). Effects of knowledge and spatial ability on learning from animation. In R. Lowe & W. Schnotz (Eds.), Learning from Animation (pp. 3–29). Cambridge, MA: Cambridge University Press.
Hijazi, W., Ghebeh, Mhd. A., & Zayed, T. (2008). VRML as an effective construction communication technique. In Proceedings of the CSCE 2008 annual conference, Quebec, Canada.
Huk, T. (2006). Who benefits from learning with 3D models? The case of spatial ability. Journal of Computer Assisted Learning, 22, 392–404.
Imagery Lab/Mental Imagery and Human-Computer Interaction Lab (2012). http://www.nmr.mgh.harvard.edu/mkozhevnlab/ Accessed 16 Feb 2012.
Jenison, R. (1997). New directions for introductory graphics in engineering education. Journal of Geometry and Graphics, 1(1), 67–73.
Johnson, W. M. et al. (2009). Employing rapid prototyping in a first-year engineering graphics course. In Proceedings of 2009 ASEE southeast section conference, Marietta, USA.
Kabouridis, G. (2010). An innovative approach to face the first-year mechanical engineering students˙ conceptual difficulties in engineering design, 1st WIETE annual conference on engineering and technology education (pp. 110–113). Pattaya, Thailand.
Keehner, M. et al. (2004). Effects of interactivity and spatial ability on the comprehension of spatial relations in a 3D computer visualization. In Proceeding of the 26th annual conference of the cognitive science society, Mahwah, NJ, 1576.
Leon, J. E., & Winek, G. (2000). Incorporating rapid prototyping into the engineering design curriculum. Engineering Design Graphics Journal, 64(1), 18–23.
Lewalter, D. (2003). Cognitive strategies for learning from static and dynamic visuals. Learning and Instruction, 13, 177–189.
Liben, L. S. (1981). Spatial representations and their behaviour: Multiple perspectives, spatial representation and behaviour across the life span. New York: Academic Press.
Lieu, D. K., & Sorby, S. (2009). Visualisation, modelling, and graphics for engineering design. Stamford, CL: Delmar Cengage Learning.
Lockhart, S. D., & Johnson, C. M. (2012). Engineering design communication: Conveying design through graphics. Englewood Cliffs, NJ: Prentice Hall.
Lowe, R. (2002). Perceptual and cognitive challenges to learning with dynamic visualizations. International Workshop on Dynamic Visualizations and Learning, pp. 18–19.
Madsen, D. A., Madsen, P., & Turpin, J. L. (2007). Engineering drawing and design. Stamford, CT: Thomson Delmar Learning.
Maier, P. H. (1994). Raeumlishes vorstellungsvermoegen. Berlin: Frankfurt am Main
Maletsky, L. P., & Hale, R. D. (2003). The practical integration of rapid prototyping technology into engineering curricula. In Proceeding of the 2003 ASEE midwest section meeting, University of Missouri-Rolla.
Malone, E. (2008). Fab@Home, http://www.fabathome.org. Accessed 16 February 2012.
Mc Gee, M. G. (1979). Human spatial abilities: psychometric studies and environmental, genetic, hormonal and neurological influences. Psychological Bulletin, 86(5), 889–918.
Miller, C. L. (1996). A historical review of applied and theoretical spatial visualization publications in engineering graphics. The Engineering Design Graphics Journal, 60(3), 12–33.
Miller, C. L., & Bertoline, G. R. (1991). Spatial visualization research and theories: Their importance in the development of an engineering and technical design graphics curriculum model. Engineering Design Graphics Journal, 55(3), 5–14.
Norman, K. L. (1994). Spatial visualization—a gateway to computer—based technology. Journal of Special Educational Technology, 12(3), 195–206.
Olson, D. R., & Bialystok, E. (1983). Spatial cognition: The structure and development of mental representation of spatial relations. London: Lawrence Erlbaum Associated.
Opalić, M., & Kljajin, M. (2010). Inzenjerska grafika, Strojarski fakultet u Slavonskom Brodu.
Piaget, J., & Inhelder, B. (1967). The child’s conception of space. New York: The North Library.
Pleck, M. H., et al. (1990). Factors affecting the engineering design graphics curriculum: Past, present, future, Proceedings of the NSF symposium on modernization of the engineering design graphics curriculum (pp. 43–52). Texas: Austin.
Rogers, M. E. (2004). A comparison of the effectiveness of modular drafting instruction versus contemporary drafting instruction on collegiate technology education students, Journal of Industrial Teacher Education, 41(2), 1–8.
Sexton, T. J. (1991). Teaching engineering graphics: A comparison between manual 2-dimensional computer-aided drafting non-traditional methods with respect to spatial visualization ability. Dissertation Abstracts International, 53, 1825.
Sexton, T. J. (1992a). Effect on spatial visualization: Introducing basic engineering graphics concepts using 3D CAD technology. Engineering Design Graphics Journal, 56(3), 36–43.
Sexton, T. J. (1992b). Effect on spatial visualization: Introducing basic engineering graphics concepts using 3D CAD technology. Engineering Design Graphics Journal, 67(2), 33–42.
Sorby, S. A. (1999). Developing 3D spatial visualization skills. Engineering Design Graphics Journal, 63(2), 21–32.
Sorby, S. A. (2007). Developing 3D spatial skills for engineering students. Australian Journal of Engineering Education, 13(1), 1–11.
Sorby, S. A., & Bartmans, B. J. (2000). The development and assessment of a course for enhancing the 3-D spatial visualization skills of first year engineering students. Journal of Engineering Education, 89(3), 301–307.
Sorby, S. A., & Gorska, R. A. (1998). The effect of various courses and teaching methods on the improvement of spatial ability. In Proceedings of the 8th international conference on engineering design graphics and descriptive geometry (pp. 252–256). Texas: Austin.
Sorby, S., & Wysocki, A. (2003). Introduction to spatial visualization: An active approach. Stamford, CT: Thomson Delmar Learning.
Strong, S., & Smith, R. (2002). Spatial visualization: fundamentals and trends in engineering graphics. Journal of Industrial Technology, 18(1), 1–6.
Tartre, L. A. (1990). Spatial skills, gender and mathematics. In E. H. Fennema & G. C. Leder (Eds.), Mathematics and gender (pp. 27–59). New York NJ: Teachers College Press.
Tavanti, M., & Lind, M. (2001). 2D vs 3D. Implications on spatial memory. In Proceedings of IEEE Info Vis 2001 symposium on information visualization, San Diego, USA.
Thomas, D. A. (1996). Enhancing spatial 3-dimensional computer graphics. Dissertation Abstracts International, 57, 3901.
Wu, K., & Shah, P. (2004). Exploring visuospatial thinking in chemistry learning. Science Education, 88, 465–492.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Marunic, G., Glazar, V. Spatial ability through engineering graphics education. Int J Technol Des Educ 23, 703–715 (2013). https://doi.org/10.1007/s10798-012-9211-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10798-012-9211-y