1 Erratum to: Int J Fract (2016) 201:29–80 DOI 10.1007/s10704-016-0142-6
Equations (8) and (9) are wrong. The correct expressions are
$$\begin{aligned} \dot{W}^p= (1-f) \bar{\sigma }\dot{\bar{\epsilon }} = {\varvec{\sigma }}:\mathbf{D}^p \end{aligned}$$
(8)
where \(\bar{\sigma }\dot{\bar{\epsilon }}\) is the plastic dissipation rate per unit matrix material volume and
$$\begin{aligned} \dot{\Lambda }=\frac{(1-f)\bar{\sigma }\dot{\bar{\epsilon }}}{{\varvec{\sigma }} : (\partial \Phi /\partial {\varvec{\sigma }})} \end{aligned}$$
(9)
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found under doi:10.1007/s10704-016-0142-6.
Rights and permissions
About this article
Cite this article
Benzerga, A.A., Leblond, JB., Needleman, A. et al. Erratum to: Ductile failure modeling. Int J Fract 204, 113 (2017). https://doi.org/10.1007/s10704-016-0159-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10704-016-0159-x