Abstract
In this paper, we develop a simple finite element method for simulation of embedded layers of high permeability in a matrix of lower permeability using a basic model of Darcy flow in embedded cracks. The cracks are allowed to cut through the mesh in arbitrary fashion and we take the flow in the crack into account by superposition. The fact that we use continuous elements leads to suboptimal convergence due to the loss of regularity across the crack. We therefore refine the mesh in the vicinity of the crack in order to recover optimal order convergence in terms of the global mesh parameter. The proper degree of refinement is determined based on an a priori error estimate and can thus be performed before the actual finite element computation is started. Numerical examples showing this effect and confirming the theoretical results are provided. The approach is easy to implement and beneficial for rapid assessment of the effect of crack orientation and may for example be used in an optimization loop.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Angot, P., Boyer, F., Hubert, F.: Asymptotic and numerical modelling of flows in fractured porous media. ESAIM: Math. Model. Numer. Anal. 43(2), 239–275 (2009)
Burman, E., Claus, S., Hansbo, P., Larson, M.G., Massing, A.: CutFEM: discretizing geometry and partial differential equations. Internat. J. Numer. Methods Engrg. 104(7), 472–501 (2015)
Burman, E., Hansbo, P., Larson, M.G.: A cut finite element method with boundary value correction. Math. Comp. 87(310), 633–657 (2018)
Burman, E., Hansbo, P., Larson, M.G.: A simple approach for finite element simulation of reinforced plates. Finite Elem. Anal Des. 142, 51–60 (2018)
Capatina, D., Luce, R., El-Otmany, H., Barrau, N.: Nitsche’s extended finite element method for a fracture model in porous media. Appl Anal. 95(10), 2224–2242 (2016)
Cenanovic, M., Hansbo, P., Larson, M.G.: Cut finite element modeling of linear membranes. Comput. Methods Appl. Mech Engrg. 310, 98–111 (2016)
D’Angelo, C., Scotti, A.: A mixed finite element method for Darcy flow in fractured porous media with non-matching grids. ESAIM: Math. Model. Numer. Anal. 46(2), 465–489 (2012)
Del Pra, M., Fumagalli, A., Scotti, A.: Well posedness of fully coupled fracture/bulk Darcy flow with XFEM. SIAM J. Numer Anal. 55(2), 785–811 (2017)
Formaggia, L., Fumagalli, A., Scotti, A., Ruffo, P.: A reduced model for Darcy’s problem in networks of fractures. ESAIM: Math. Model. Numer. Anal. 48(4), 1089–1116 (2014)
Frih, N., Roberts, J.E., Saada, A.: Modeling fractures as interfaces: a model for Forchheimer fractures. Comput. Geosci. 12(1), 91–104 (2008)
Hægland, H., Assteerawatt, A., Dahle, H.K., Eigestad, G.T., Helmig, R.: Comparison of cell- and vertex-centered discretization methods for flow in a two-dimensional discrete-fracture-matrix system. Adv. Water Resour. 32(12), 1740–1755 (2009)
Hansbo, A., Hansbo, P., Larson, M.G.: A finite element method on composite grids based on Nitsche’s method. ESAIM: Math. Model. Numer. Anal. 37(3), 495–514 (2003)
Hansbo, P., Jonsson, T., Larson, M.G., Larsson, K.: A Nitsche method for elliptic problems on composite surfaces. Comput. Methods Appl. Mech. Engrg. 326, 505–525 (2017)
Huang, H., Long, T.A., Wan, J., Brown, W.P.: On the use of enriched finite element method to model subsurface features in porous media flow problems. Comput. Geosci. 15, 721–736 (2011)
Martin, V., Jaffré, J., Roberts, J.E.: Modeling fractures and barriers as interfaces for flow in porous media. SIAM J. Sci. Comput. 26(5), 1667–1691 (2005)
Odsæter, L.H., Kvamsdal, T., Larson, M.G.: A simple embedded discrete fracture-matrix model for a coupled flow and transport problem in porous media. Comput. Methods Appl. Mech. Engrg. (to appear), arXiv:1803.03423 (2018)
Prats, M.: Effect of vertical fractures on reservoir behavior—incompressible fluid case. SPE J. 1(2), 105–118 (1961)
Funding
This research was supported in part by the Swedish Foundation for Strategic Research Grant No. AM13-0029, the Swedish Research Council Grants Nos. 2011-4992, 2013-4708, and the Swedish Research Programme Essence. The first author was supported in part by the EPSRC grant EP/P01576X/1.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Burman, E., Hansbo, P. & Larson, M.G. A simple finite element method for elliptic bulk problems with embedded surfaces. Comput Geosci 23, 189–199 (2019). https://doi.org/10.1007/s10596-018-9792-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10596-018-9792-y