Skip to main content
Log in

13C NMR and XRD studies on the enhancement of cellulose II crystallinity with low concentration NaOH post-treatments

  • Original Research
  • Published:
Cellulose Aims and scope Submit manuscript

Abstract

In this study, methods of completing the structural conversion of partly crystalline cellulose II were studied by solid-state 13C CP/MAS NMR spectroscopy and X-ray diffraction. The study incorporated post-treatments of samples that had been mercerized or regenerated to yield somewhat crystalline cellulose II. These post-treatments used different temperatures, lower concentrations of NaOH than used in, for example, the original mercerization, and different neutralization methods. The cellulose employed was originally filter paper from wood pulp that was subsequently mercerized or dissolved and regenerated to create partly crystalline cellulose II. The variations in rate of each component were monitored at different NaOH concentrations and reaction temperatures during the treatment; these components include the crystalline and accessible surface as well as the inaccessible surface/amorphous region. Subsequently, neutralization was performed for the crystallization of cellulose II and the effects of the acid employed were also evaluated. It can be thought that controlling the partial Na-cellulose construction is important for improving the assembly of cellulose II; this is achieved by optimizing the concentration of NaOH, treatment temperature, and selection of acid for neutralization. NMR spectroscopy of the intermediate state of the NaOH detected the partial generation of Na-cellulose; further, another domain exhibited the spectrum of highly crystallized cellulose II. It is believed that the selective Na-cellulose construction in the inaccessible surface cellulose is the result of an increase in the size of cellulose II crystals. During the NaOH treatment, at a concentration of 10%, the crystallinity index evaluated by both NMR and X-ray was maximized; further, at the treatment temperature of 80 °C the crystallinity of the cellulose II evaluated by NMR improved. Moreover, the neutralization, which was conducted after the alkaline treatment with H2SO4, established the most suitable conditions for the crystallization of cellulose II.

Graphic abstract

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

Download references

Acknowledgments

The authors would like to thank The High Brilliance X-ray Laboratory, Hokkaido University for allowing the utilization of their X-ray diffractometer. Further, the authors thank the Nuclear Magnetic Resonance Laboratory, Faculty of Engineering, Hokkaido University for providing the NMR spectrometer.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Tomoki Erata.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Below is the link to the electronic supplementary material.

Supplementary material 1 (DOCX 5447 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Nomura, S., Kugo, Y. & Erata, T. 13C NMR and XRD studies on the enhancement of cellulose II crystallinity with low concentration NaOH post-treatments. Cellulose 27, 3553–3563 (2020). https://doi.org/10.1007/s10570-020-03036-6

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10570-020-03036-6

Keywords

Navigation