Hydrogen Production by Steam Reforming of Ethanol Over Mesoporous Ni–Al₂O₃–ZrO₂ Catalysts

Abstract

This review paper reports the recent progress concerning the application of nickel–alumina–zirconia based catalysts to the ethanol steam reforming for hydrogen production. Several series of mesoporous nickel–alumina–zirconia based catalysts were prepared by an epoxide-initiated sol–gel method. The first series comprised Ni–Al₂O₃–ZrO₂ xerogel catalysts with diverse Zr/Al molar ratios. Chemical species maintained a well-dispersed state, while catalyst acidity decreased with increasing Zr/Al molar ratio. An optimal amount of Zr (Zr/Al molar ratio of 0.2) was required to achieve the highest hydrogen yield. In the second series, Ni–Al₂O₃–ZrO₂ xerogel catalysts with different Ni content were examined. Reducibility and nickel surface area of the catalysts could be modulated by changing nickel content. Ni–Al₂O₃–ZrO₂ catalyst with 15 wt% of nickel content showed the highest nickel surface area and the best catalytic performance. In the catalysts where copper was introduced as an additive (Cu–Ni–Al₂O₃–ZrO₂), it was found that nickel dispersion, nickel surface area, and ethanol adsorption capacity were enhanced at an appropriate amount of copper introduction, leading to a promising catalytic activity. Ni–Sr–Al₂O₃–ZrO₂ catalysts prepared by changing drying method were tested as well. Textural properties of Ni–Sr–Al₂O₃–ZrO₂ aerogel catalyst produced from supercritical drying were enhanced when compared to those of xerogel catalyst produced from conventional drying. Nickel dispersion and nickel surface area were higher on Ni–Sr–Al₂O₃–ZrO₂ aerogel catalyst, which led to higher hydrogen yield and catalyst stability over Ni–Sr–Al₂O₃–ZrO₂ aerogel catalyst.