A procedure for calculating rational values of the nominal discharge pressures in the compressor and pump sections of a crossheadless hybrid power machine based on equality of volumes of mass flowing from the pump section to the compressor section and back in the course of the cycle is proposed. From a numerical experiment we are able to evaluate the influence of the main design and operating parameters on the ratio of the nominal discharge pressures in the compressor and pump sections. Based on the analysis, the principal methods of equalizing the nominal discharge pressures in the compressor and pump sections are determined.
Similar content being viewed by others
References
V. E. Shcherba, A. P. Bolshtyanskii, V. V. Shalay, and E. V. Khodyreva, Pump Compressors. Working Processes and Design Foundations [in Russian], Mashinostroenie, Moscow (2013).
V. E. Shcherba, A. P. Bolshtyanskii, S. Yu. Kaigorodov, and D. A. Kuzeev, “Analysis of the basic advantages produced by combining a volumetric compressor and volumetric pump into a unified device,” Vest. Mashinostroeniya, No. 12, 15−19 (2015).
A. Yu. Kondyurin, V. E. Shcherba, V. V. Shalai, et al., “Calculation of a flow of liquid in the groove seal of a pump-compressor created in the form of a hydraulic diode,” Khimich. i Neftegaz. Mashinostroenie, No. 4, 30−35 (2016).
V. E. Shcherba, A. P. Bolshtyanskii, G. A. Nesterenko, and A. Yu. Kondyurin, “On the relationship of mass flows of liquid and the discharge pressure between the pump and compressor chambers in a hybrid reciprocating power machine,” Khimich. i Neftegaz. Mashinostroenie, No. 4, 35−38 (2016).
A. Yu. Kondyurin, V. E. Shcherba, V. V. Shalai, et al., “Analysis and optimization of basic geometric parameters of an annular groove seal produced in the form of a hydraulic diode,” Khimich. i Neftegaz. Mashinostroenie, No. 4, 39−44 (2016).
V. E. Shcherba, E. A. Lysenko, G. A. Nesterenko, et al., “Development and investigation of a piston seal produced in the form of smooth stepped groove for a volumetric hybrid reciprocating power machine,” Khimicheskoe i Neftegazovoe Mashinostroenie, No. 4, 45−48 (2016).
V. E. Shcherba, A. P. Bolshtyanskii, A. Yu. Kondyurin, et al., Patent No. 2644424 (Russian Federation), IPC F04B19106, “Hybrid machine with trunk piston,” Byul., No. 5 (Dec. 2, 2018).
I. I. Kukolevskii and L. G. Podviz, Collection of Problems on Mechanical Hydraulics [in Russian], Izd-vo Bauman MGGU, Moscow (2002).
P. I. Plastinin, Piston Compressors [in Russian], Vol. 1, Kolos-s, Moscow (2006).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, Vol. 54, No. 6, pp. 30−32, June, 2018.
Rights and permissions
About this article
Cite this article
Shcherba, V.E., Aver’yanov, G.S., Kalekin, V.S. et al. Calculation of Rational Values of Discharge Pressures in the Compressor and Pump Sections of a Crossheadless Reciprocating Hybrid Power Machine. Chem Petrol Eng 54, 418–424 (2018). https://doi.org/10.1007/s10556-018-0496-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-018-0496-x