Modelling tidally induced sediment-transport paths over the northwest European shelf: the influence of sea-level reduction

Abstract

A three-dimensional model covering the northwest European Shelf and part of the adjacent Atlantic Ocean is used to examine the influence of water depth change upon the distribution of maximum tidal bed stress. The direction of bed stress is an indicator of sediment movement as bed load and various regions of convergence and divergence in good agreement with observations are identified. Calculations are performed with water depths reduced by 35 m, corresponding to 10 000 years before present (B.P.). Initially, the model is forced by only the M₂ tide, although subsequently five constituents, namely M₂, S₂, N₂, K₁ and O_1, are used for tidal forcing. Although the distribution of extreme bed stresses computed with only M₂ tidal forcing is comparable to that computed with five tides, the additional tidal constituents modify the magnitude of the bed stress. In particular the diurnal tides show regions of local enhanced current amplitude in the shelf-edge region with corresponding changes in bed stress. When water depths are reduced such that the North Sea and English Channel are separated, then there is a significant change in the tidal distribution in the shallow Southern Bight which influences bed-stress distributions and hence bed-load sediment transport in the area. Besides changes in shallow regions, the distribution of tides at the shelf edge is affected. A discussion of the limitations of the present coarse-grid model in shelf-edge regions and how it can be used to provide boundary conditions for limited-area three-dimensional models that can include stratification is presented. Also the importance of stratification for sediment movement at the shelf edge is briefly discussed.