Abstract
Electrical and electronic equipment waste (WEEE) problems should be set as a priority in Thailand due to unpleasant operations. E-waste mismanagement caused by illegal transport of WEEE has intensified public health and environmental concerns. Computers are processed in recycling industries, but they still contain vulnerable metal remnants, such as gold. High-grade components, such as Random-Access Module (RAM), for example, are often extracted by hydrometallurgical processes through different leaching chemicals along with their related methods. Gold leaching agents, including aqua regia and cyanide-based solutions, were considered to extract gold from computer RAM in this study. Environmental impacts of the two extracting processes were investigated using material flow analysis and life cycle assessment, based on 1 kg of recovered gold. The effect of pulp density was also measured. The comparison between the two leaching processes without waste management demonstrated that the cyanide-based solution provided 8.5 times lower in terrestrial ecotoxicity and 6.4 times lower in human carcinogenic toxicity than aqua regia due to the lower overall chemical consumption. Nevertheless, proper wastewater treatments and a combination of incineration and landfill for solid waste treatment are potential options to minimize these impacts.
Similar content being viewed by others
References
Pollution Control Department of Thailand (2020) Thailand State of Pollution Report 2019. Pollution Control Department of Thailand. https://www.pcd.go.th/publication/8013/. Accessed 22 Jan 2021
Suresh SS, Bonda S, Mohanty S, Nayak SK (2018) A review on computer waste with its special insight to toxic elements, segregation and recycling techniques. Process Saf Environ 116:477–493. https://doi.org/10.1016/j.psep.2018.03.003
Lu Y, Xu Z (2016) Precious metals recovery from waste printed circuit boards: a review for current status and perspective. Resour Conserv Recycl 113:28–39. https://doi.org/10.1016/j.resconrec.2016.05.007
Szałatkiewicz J (2014) Metals content in printed circuit board waste. Pol J Environ Stud 23:2365–2369
Razi KMHA (2016) Resourceful recycling process of waste desktop computers: a review study. Resour Conserv Recycl 110:30–47. https://doi.org/10.1016/j.resconrec.2016.03.017
JX Nippon Mining & Metal Corporation (2010) Recycling of rare metals in the JX Nippon Mining & Metals (in Japanese). Online presentation
Kida A (2010) Elemental analysis methods including rare metals in used products. J Jpn Soc Mater Cycles Waste Manag. http://jsmcwm.or.jp/recycle/4_Kida_NIES.pdf. Accessed 20 Feb 2020
Lu Y, Song Q, Xu Z (2017) Integrated technology for recovering Au from waste memory module by chlorination process: selective leaching, extraction, and distillation. J Clean Prod 161:30–39. https://doi.org/10.1016/j.jclepro.2017.05.033
Ulman K (2019) Innovation methods for recovery of valuable materials from E-waste. Dissertation, University of New South Wales
Zhu M, Ma H, He J, Chen B, Zhang L, Jiang H, Sun X, Zhao J (2020) Metal recycling from waste memory modules efficiently and environmentally friendly by low-temperature alkali melts. Sci China Technol Sci 63:2275–2282. https://doi.org/10.1007/s11431-020-1624-8
Moltó J, Font R, Gálvez A, Conesa JA (2009) Pyrolysis and combustion of electronic wastes. J Anal Appl Pyrol 84:68–78. https://doi.org/10.1016/j.jaap.2008.10.023
Chancerel P, Meskers CEM, Hagelüken C, Rotter VS (2009) Assessment of precious metal flows during preprocessing of waste electrical and electronic equipment. J Ind Ecol 13:791–810. https://doi.org/10.1111/j.1530-9290.2009.00171.x
Pant D, Joshi D, Upreti MK, Kotnala RK (2012) Chemical and biological extraction of metals present in E waste: a hybrid technology. Waste Manag 32(5):979–990. https://doi.org/10.1016/j.wasman.2011.12.002
Gurang M, Adhikari BB, Kawakita H, Ohto K, Inoue K, Alam S (2013) Recovery of gold and silver from spent mobile phones by means of acidothiourea leaching followed by adsorption using biosorbent prepared from persimmon tannin. Hydrometallurgy 133:84–93. https://doi.org/10.1016/j.hydromet.2012.12.003
Geoffroy N, Cardarelli F (2005) A method for leaching or dissolving gold from ores or precious metal scrap. J Miner Met Mater Soc. https://doi.org/10.1007/s11837-005-0168-0
Herschlog V (1941) Procedure for volumetric determination of gold by means of potassium iodide and arsenious acid. J Ind Eng Chem 13:561–563. https://doi.org/10.1021/i560096a016
Jacobson CA (1959) Encyclopedia of chemical reactions. Reinhold Publishing Co., New York
Zhang Y, Liu S, Xie H, Zeng X, Li J (2012) Current status on leaching precious metals from waste printed circuit boards. Proced Environ Sci 16:560–568. https://doi.org/10.1016/j.proenv.2012.10.077
Mudder TI, Botz MM (2004) Cyanide and society: a critical review. Eur J Miner Process Environ Prot 4:62–74
Randol International Ltd (1985) Water management and treatment for mining and metallurgical operations. Golden, Colorado, pp 2294–2700
Flynn CM, Haslem SM (1995) Cyanide chemistry: precious metals processing and waste treatment. U.S. Bureau of Mines, NTIS Publication, PB96-117841
Kuyucak N, Akcil A (2013) Cyanide and removal options from effluents in gold mining and metallurgical processes. Miner Eng 50:13–29. https://doi.org/10.1016/j.mineng.2013.05.027
Habashi F (1970) Principles of extractive metallurgy: hydrometallurgy 2. Gordon & Breach, New York
Xue M, Xu Z (2017) Application of life cycle assessment on electronic waste management: a review. Environ Manag 59:693–707. https://doi.org/10.1007/s00267-016-0812-1
Ismail H, Hanafiah MM (2019) An overview of LCA application in WEEE management: current practices, progress and challenges. J Clean Prod 232:79–93. https://doi.org/10.1016/j.jclepro.2019.05.329
Brug JE, Heidelberg EX (1974) Recovery of gold from solution in aqua regia. U.S. patent 3,856,507
Nehl FH, Murphy JE, Atkinson GB, Walters LA (1993) Selective electrowinning of silver and gold from cyanide process solutions. U.S. Department of the Interior, Washington, DC
McClelland GE, Wroblewski MD, Eisele JA (1985) Production of high-purity gold from zinc precipitates and steel wool cathodes by hydrometallurgical refining. U.S. Department of the Interior, Pittsburgh
Laner D, Feketitsch J, Rechberger H, Fellner J (2015) A novel approach to characterize data uncertainty in material flow analysis and its application to plastics flows in Austria. J Ind Ecol 20:1050–1063. https://doi.org/10.1111/jiec.12326
Bisinella V, Conradsen K, Christensen TH, Astrup TF (2016) A global approach for sparse representation of uncertainty in Life Cycle Assessments of waste management systems. Int J Life Cycle Assess 21:378–394. https://doi.org/10.1007/s11367-015-1014-4
Sheng PP, Etsell TH (2007) Recovery of gold from computer circuit board scrap using aqua regia. Waste Manag Res 25:380–383. https://doi.org/10.1177/0734242x07076946
Charles RG, Douglas P, Hallin IL, Matthews I, Liversage G (2017) An investigation of trends in precious metal and copper content of RAM modules in WEEE: implications for long term recycling potential. J Waste Manag 60:505–520. https://doi.org/10.1016/j.wasman.2016.11.018
Adams MD (1990) The chemical behaviour of cyanide in the extraction of gold. 1. Kinetics of cyanide loss in the presence and absence of activated carbon. J S Afr Inst Min Metall 90:37–44
Free ML (2013) Hydrometallurgy: fundamentals and applications. Wiley, New Jersey
Valiūnienė A, Baltrūnas G, Keršulytė V, Margarian Z, Valinčius G (2013) The degradation of cyanide by anodic electrooxidation using different anode materials. Process Saf Environ 91:269–274. https://doi.org/10.1016/j.psep.2012.06.007
Petter PMH, Veit HM, Bernardes AM (2014) Evaluation of gold and silver leaching from printed circuit board of cellphones. J Waste Manag 34:475–482. https://doi.org/10.1016/j.wasman.2013.10.032
Ning C, Lin CSK, Hui DC, McKay G (2017) Waste printed circuit board (PCB) recycling techniques. Top Curr Chem. https://doi.org/10.1007/s41061-017-0118-7
Chinda T, Leewattana N, Leeamnuayjareon N (2012) The study of landfill situations in Thailand. http://mfuic2012.mfu.ac.th/electronic_proceeding/Documents/00_PDF/O-SC-D/O-SC-D-006.pdf. Accessed 17 Feb 2020
National Research Council (2000) Waste incineration and public health. The National Academies Press, Washington, DC
Rubin RS, Castro MAS, Brandão D, Schalch V, Ometto AR (2014) Utilization of Life Cycle Assessment methodology to compare two strategies for recovery of copper from printed circuit board scrap. J Clean Prod 64:297–305. https://doi.org/10.1016/j.jclepro.2013.07.051
Acknowledgements
This research was supported by the Department of Environmental Engineering, Faculty of Engineering, Chulalongkorn University, Center of Excellence on Hazardous Substance Management, Chulalongkorn University. The Scholarship from the Graduate School, Chulalongkorn University to commemorate the 72nd Anniversary of his Majesty King Bhumibol Adulyadej is gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Ponghiran, W., Charoensaeng, A. & Khaodhiar, S. The environmental impact assessment of gold extraction processes for discarded computer RAM: a comparative study of two leaching chemicals. J Mater Cycles Waste Manag 23, 1412–1422 (2021). https://doi.org/10.1007/s10163-021-01221-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10163-021-01221-8