Abstract
Ultrabasic rocks show a variety of engineering properties that may affect quarrying operations, tunnelling, mining, slope stability and the use of rock as a construction material. The physico-mechanical properties are influenced by the mineralogical and textural characteristics as well as the weathering of the rock. For this reason, the relationships between petrographic and physico-mechanical properties of fresh (peridotites) and serpentinized (serpentinites) ultrabasic rocks from central Greece, were investigated using correlation analysis. Thin sections, from the 47 samples, were prepared and examined under the polarizing microscope with the aim of describing the main mineralogical composition, the grain size, the serpentinization percentage and the structure of the rocks. The mineralogical and textural characteristics of some of them were also studied by X-ray diffraction analyses and the scanning electron microscope. The 47 samples were tested to determine dry and saturated unit weight, effective porosity, uniaxial compressive strength and static modulus of elasticity. The relationships between these properties and the petrographic characteristics are described by simple regression analyses. The research demonstrates that the physico-mechanical characteristics are strongly influenced by the petrographic characteristics except for mineral grain size. Negative linear correlations exist between serpentinization percentage and dry unit weight, while the effective porosity has a strong positive relationship with degree of serpentinization. Positive relationships are also obtained between the mechanical properties and dry unit weight and micropetrographic index I ps, while the increase of effective porosity causes a decrease in the index I ps (logarithmically in peridotites, and exponentially in serpentinites). The mechanical properties are exponentially related (negatively) to the serpentinization percentage in serpentinites and logarithmically (negatively) in peridotites. The serpentine plays a very important role in strength and elasticity modulus reduction, while the primary minerals have a smaller effect on the mechanical properties.
Similar content being viewed by others
References
Akesson U, Lindqvist JE, Göransson M, Stigh J (2001) Relationship between texture and mechanical properties of granites, central Sweden, by use of image—analysing techniques. Bull Eng Geol Environ 60:277–284
Al-Oraimi SK, Taha R, Hassan HF (2006) The effect of the mineralogy of coarse aggregate on the mechanical properties of high-strength concrete. Constr Build Mater 20:499–503
ASTM (1986) Standard test method of unconfined compressive strength of intact rock core specimens. Annual Book of Standards, 4.08. American Society for Testing and Materials, Philadelphia, D2938
ASTM (2001) Standard practices for preparing Rock core specimens and determining dimensional and shape tolerances. American Society for Testing and Materials, D4543
Brace WF (1961) Dependence of fracture strength of rocks on grain size. In: Proceedings of 4th symposium. Rock Mech., Univ. Park, Penn., PA, pp 99–103
Christensen NI (1966) Shear-wave vetocities in metamorphic rocks at pressures to 10 kbar. J Geophys Res 71:3549–3556
Christensen NI (2004) Serpentinites, peridotites and seismology. Int Geol Rev 46(2004):795–816
Deere DU, Miller RP (1966) Engineering classification and index properties for intact rock. US Air Force Systems Command, Air Force Weapons Lab., Kirtland Air Force Base, New Mexicom, Technical Report, AFWL-TR, pp 65–116
Diamantis K (2010) Engineering geological properties of the ultrabasic rocks in Othrys and Kallidromo mountains (central Greece). Phd Thesis, Athens, p 386
Diamantis K, Gartzos E, Migiros G (2009) Study on uniaxial compressive strength, point load strength index, dynamic and physical properties of serpentinites from Central Greece: test results and empirical relations. Eng Geol 108:199–207
Escartin J, Hirth G, Evans B (2001) Strength of slightly serpentinized peridotites: implications for the tectonics of oceanic lithosphere. Geol Soc Am 29(11):1023–1026
Ferriere J (1982) Paleogeographies et Tectoniques Superposees dans les Hellenides Internes au Niveau de l’ Othrys et de Pelion (Grece). Univ. des Sciences et Techniques de Lille
Grönholm S (1994) Influence of mineral composition and microstructures on the mechanical properties of host rocks of the Kemi (Elijärvi) Chromite Deposit: Finland, Report of Investigation N126. Geological Survey of Finland, Finland
Gunsallus KL, Kulhawy FH (1984) A comparative evaluation of rock strength measures. Int J Rock Mech Min Sci Geomech Abstr 21:233–248
Haney MG, Shakoor A (1994) The relationship between tensile and compressive strengths for selected sandstones as influenced by index properties and petrographic characteristics. In: Proceedings of 7th international IAEG Cong., Lisbon, Portugal, vol IV, pp 3013–3021
Hartley A (1974) A review of the geological factors influencing the mechanical properties of road surface aggregates. Q J Eng Geol 7:69–100
Hawkins AB (1998) Aspects of rock strength. Bull Eng Geol Environ 57:17–30
Hoek E, Brown ET (1980) Underground excavations in rock. Inst. Min. 537 Metall, London
Irfan TY, Dearman WR (1978) The engineering petrography of a weathered granite in Cornwall, England. Q J Eng Geol 11:233–244
ISRM (1981) Rock characterization testing and monitoring. In: Brown ET (eds) ISRM suggested methods, Pergamon Press, Oxford, p 211
ISRM (2007) In: Ulusay R, Hudson JA (eds) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006. Suggested methods prepared by the commission on testing methods, International Society for Rock Mechanics, compilation arranged by the ISRM Turkish National Group Ankara, Turkey, 2007, p 628
Katsikatsos G, Migiros G, Triantaphyllis M, Mettos A (1986) Geological structure of internal Hellenides (E. Thessaly-SW Macedonia. Euboea-Attica-Northern Cyclades islands and Lesvos). I.G.M.E.. Geol. and Geoph. Res. Special Issue 191–212
Koumantakis J (1982) Comportement des peridotites et serpentinites de la Grece en travaux public. Leur propretes physiques et mechaniques. Bul IAEG 25:53–60
Lundqvist S, Göran M (2001) Evaluation and interpretation of microscopic parameters versus mechanical properties of precambrian rocks from the Stockholm region, Sweden. In: Proceedings of 8th Euroseminar on microscopy applied to building materials, 4–7 Sept, Athens
Marinos G (1974) Geology of Orthrys and issues on its ophiolites. Ann Geol d Pays Jieneiiiciue. st26, University of Athens, pp 118–148
Marinos P, Hoek E, Marinos V (2006) Variability of the engineering properties of rock masses quantified by the geological strength index: the case of ophiolites with special emphasis on tunnelling. Bull Eng Geol Environ 65:129–142
Migiros G (1990) The lithostratigraphic-tectonic structure of Othris (Central Greece). Bull Geol Soc Greece XXVI:107–120
Miskovsky K, Taborda Duarte M, Kou SQ, Lindqvist PA (2004) Influence of the mineralogical composition and textural properties on the quality of coarse aggregates. J Mater Eng Perform 13(2):144–150
Mountrakis D, Sapountzis E, Kilias A, Eleftheriadis G, Christofides G (1983) Paleogeographic conditions in the western Pelagonian margin in Greece during the initial rifting of the continental area. Can J Ear Sci 20:1673–1681
Onodera TF, Asoka Kumara HM (1980) Relation between texture and mechanical properties of crystalline rocks. Bull Int Assoc Eng Geol 20:173–177
Ozsoy EA, Yilmaz G, Arman H (2010) Physical, mechanical and mineralogical properties of ophiolitic rocks at the Yakakayi dam site, Eskisehir, Turkey. Sci Res Essays 5(17):2579–2587
Pomonis P, Rigopoulos I, Tsikouras B, Hatzipanagiotou K (2007) Relationships between petrographic and physico-mechanical properties of basic igneous rocks from the Pindos ophiolitic complex, NW Greece. Bull Geol Soc Greece XXXX(2):947–958
Ramana YV, Gogte BS, Sarma KVLNS (1986) Physical properties of Indus ophiolites from Kashmir Himalaya. Phys Earth Planet Int 43:104–122
Rao MVMS, Ramana YV (1974) Dilatant behaviour of ultramafic rocks during fracture. Int J Rock Mech Min Sci Geomech Abstr 11: 193–203. Pergamon Press 1974. Printed in Great Britain
Rigopoulos I, Tsikouras B, Pomonis P, Hatzipanagiotou K (2010) The influence of alteration on the engineering properties of dolerites: the examples from the Pindos and Vourinos ophiolites (northern Greece). Int J Rock Mech Min Sci 47:69–80
Shakoor A, Bonelli RE (1991) Relationship between petrographic characteristics, engineering index properties and mechanical properties of selected sandstones. Bull Int Assoc Eng Geol XXVIII(1):55–71
Shimada M, Cho A, Yukutake H (1983) Fracture strength of dry silicate rocks at high confining pressures and activity of acoustic emission. Tectonophysics 96:159–172
Streckeisen AL (1976) Classification of the common igneous rocks by means of their chemical composition: a provisional attempt. Neues Jahrbuch for Mineralogie, Monatshefte H. 1:1–15
Tamrakar NK, Yokota S, Shrestha SD (2007) Relationships among mechanical, physical and petrographic properties of Siwalik sandstones, Central Nepal Sub-Himalayas. Eng Geol 90:105–123
Tuğrul A, Zarif IH (1999) Correlation of mineralogical and textural characteristics with engineering properties of selected granitic rocks from Turkey. Eng Geol 51:303–317
Zorlu K, Ulusay R, Ocakoglu F, Gokceoglu C, Sonmez H (2004) Predicting intact rock properties of selected sandstones using petrographic thin-section data. Int J Rock Mech Min Sci 41(1):93–98
Acknowledgments
This study was funded by the State Scholarship Foundation of Greece (I.K.Y) to the first author (K. D). The authors would also like to express their thanks to the Public Works Central Laboratory of Greece (KEDE) and to Ass. Professor Anastasios Tsagalidis for his help in petrography.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Diamantis, K., Gartzos, E. & Migiros, G. Influence of petrographic characteristics on physico-mechanical properties of ultrabasic rocks from central Greece. Bull Eng Geol Environ 73, 1273–1292 (2014). https://doi.org/10.1007/s10064-014-0584-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10064-014-0584-x