Purpose.
Because biopsy forceps tend to turn towards the right hepatic duct during endoscopic retrograde cholangiopancreatography (ERCP), selective access to the left hepatic duct is difficult. Methods. In this study, we managed to insert biopsy forceps selectively into the left hepatic duct, by using a looping technique, in three patients. Biopsy forceps were inserted into the right hepatic duct by the conventional method. The elevator of the endoscope was kept down, and the shaft of the biopsy forceps was then advanced to the duodenal cavity until it formed a loop between the endoscope and the papilla. During the procedure, the tip of the forceps was kept at the hepatic hilus. Results. In this condition, we were able to slowly rotate the tip of the forceps and direct the forceps towards the left. Sufficient material from the left hepatic duct was obtained in all patients. Conclusions. The looping technique was useful for selective access to the left hepatic duct.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Received: November 30, 2000 / Accepted: February 23, 2001
Rights and permissions
About this article
Cite this article
Higashizawa, T., Tamada, K., Tomiyama, T. et al. Looping technique for transpapillary selective biopsy of the left hepatic duct. J Gastroenterol 36, 492–494 (2001). https://doi.org/10.1007/s005350170073
Issue Date:
DOI: https://doi.org/10.1007/s005350170073