Abstract
The purpose of the study was to assess occupational exposure to chemicals, by taking the aspects presented in European standard EN 689 into account, especially with respect to homogeneous exposure groups and their suitability as the basis for exposure assessment. In addition, dermal exposure to chemicals was assessed when appropriate. The industries studied included a plywood factory, a paint factory and a sewage treatment plant of an oil refinery. The workers were classified into homogeneous exposure groups by the persons in charge of occupational health issues in the respective workplaces. The concentrations of the contaminants were measured in workplace air by breathing-zone and stationary sampling, and these approaches were compared. Dermal exposure was measured when applicable. The homogeneity of the grouping was tested with analysis of variance whenever possible. The tasks studied in plywood manufacturing fulfilled the criteria of homogeneous exposure groups for both respiratory and dermal exposure. The group of operators in the sewage treatment plant was highly homogeneous. The complicated organization of the tasks made the use of homogeneous exposure groups (HEG) unsuitable at the paint factory. These findings show that reliable exposure assessment cannot be achieved with a formal standard; instead, comprehensive occupational hygiene evaluation is needed. It should also have a great importance when exposure models are developed.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Received: 27 December 1999 / Accepted: 6 May 2000
Rights and permissions
About this article
Cite this article
Mäkinen, M., Kangas, J. & Kalliokoski, P. Applicability of homogeneous exposure groups for exposure assessment in the chemical industry. Int Arch Occup Environ Health 73, 471–478 (2000). https://doi.org/10.1007/s004200000175
Issue Date:
DOI: https://doi.org/10.1007/s004200000175