Abstract.
The performance of the coils used for a resonance spin-echo spectrometer is simulated to obtain the optimum parameters. The possibility to use a round wire instead of a flat band for coil production is explored. The parameters of the static bootstrap coils were varied in a 2D approach and a better configuration than one actually uses was found.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Received: 17 July 2001 / Accepted: 2 May 2002
RID="*"
ID="*"Corresponding author. (Fax: +49-89/289-13776, E-mail: sprokuda@ph.tum.de)
Rights and permissions
About this article
Cite this article
Prokudaylo, S., Gähler, R., Keller, T. et al. Calculations on resonance spin-echo coils . Appl Phys A 74 (Suppl 1), s317–s319 (2002). https://doi.org/10.1007/s003390201907
Issue Date:
DOI: https://doi.org/10.1007/s003390201907