Skip to main content
SpringerLink
Log in

Research on strip hysteretic behavior and mill vertical vibration system nonlinear dynamics

  • Published:
Applied Physics A Aims and scope Submit manuscript

Abstract

Rolling mill vibration is a technical problem in the iron and steel industry for many years and has serious impact and harm on production. There were serious vibrations in the middle mills when rolling thin container strip for the compact strip production (CSP) strip hot rolling process. This paper studied the hysteretic characteristic of rolled strip and established the vertical vibration system single-degree-of-freedom dynamics model of the F3 mill rollers. The influence of parameters on the system characteristics was studied, such as the linear damping coefficient, linear stiffness coefficient, nonlinear displacement coefficient, nonlinear velocity coefficient and exciting force, and then, the vibration source and vibration-restraining measure were studied from the roll gap. The results show that with increasing linear stiffness, damping and hysteresis coefficient, it can reduce the possibility of chaotic system; the linear stiffness coefficient had the greatest influence, and hysteresis damping coefficient had minimal influence on chaotic threshold. In order to reduce rolling mill vibration amplitude, we should reduce the external excitation force firstly, and in order to improve the dynamic performance of the system, we should control the speed of nonlinear coefficient values. The contrast experiments were carried out at the production scene finally.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26
Fig. 27
Fig. 28

Similar content being viewed by others

References

  1. H. Furumoto, S. Kanemori, K. Hayashi, A. Sako, T. Hiura, H. Tonaka, Enhancing technologies of stabilization of mill vibration by mill stabilizing device in hot rolling. Proced. Eng. 81, 102–107 (2014)

    Article  Google Scholar 

  2. Y. Kim, K. Chang-Wan, L. Sung-Jin, H. Park, Experimental and numerical investigation of the vibration characteristics in a cold rolling mill using multibody dynamics. ISIJ Int. 52(11), 2042–2047 (2012)

    Article  Google Scholar 

  3. Andrzej Swiatoniowski, Ryszard Gregorczyk, Self-excited vibrations in four-high rolling mills caused by stochastic disturbance of friction conditions on the roll-roll contact surface. Mech. Control 29(3), 158–162 (2010)

    Google Scholar 

  4. Y.A. Amer, A.T. El-Sayed, F.T. El-Bahrawy, Torsional vibration reduction for rolling mill’s main drive system via negative velocity feedback under parametric excitation. J. Mech. Sci. Technol. 29(4), 1581–1589 (2015)

    Article  Google Scholar 

  5. N. Fujita, Y. Kimura, K. Kobayashi, K. Itoh, Y. Amanuma, Y. Sodani, Dynamic control of lubrication characteristics in high speed tandem cold rolling. J. Mater. Process. Technol. 229, 407–416 (2015)

    Article  Google Scholar 

  6. H. Kijima, An experimental investigation on the influence of lubrication on roughness transfer in skin-pass rolling of steel strip. J. Mater. Process. Technol. 225(3), 1–8 (2015)

    MathSciNet  Google Scholar 

  7. S.K. Yildiz, J.F. Forbes, B. Huang, Y. Zhang, F. Wang, V. Vaculik, Dynamic modelling and simulation of a hot strip finishing mill. Appl. Math. Model. 33(7), 3208–3225 (2009)

    Article  MATH  Google Scholar 

  8. B. Armstrong-Hélouvry, Stick slip and control in low-speed motion. IEEE Trans. Autom. Control 38(10), 1483–1496 (1993)

    Article  MathSciNet  Google Scholar 

  9. Fan Xiaobin, Vibration Problem Research for CSP Mill Stand [D] (University of Science and Technology Beijing, Beijing, 2007)

    Google Scholar 

  10. Y.K. Wen, Method for random vibration of hysteretic system. J. Eng. Mech. Div. 102(2), 249–263 (1976)

    Google Scholar 

  11. A. Niesłony, C.E. Dsoki, H. Kaufmann, P. Krug, New method for evaluation of the manson–coffin–basquin and ramberg–osgood equations with respect to compatibility. Int. J. Fatigue 30, 1967–1977 (2008)

    Article  MATH  Google Scholar 

Download references

Acknowledgments

This research was supported by Key Scientific Research Project of Henan Province (No. 17A580003), Henan Polytechnic University Education Teaching Reform Research Projects (No. 2015JG034) and Colleges and Universities Focus on Soft Science Research Project Plan (No. 16A630049).

Author information

Authors and Affiliations

  1. School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo, 454003, China

    Xiaobin Fan & Ke Jin

  2. Mechanical Engineering Institute, University of Science and Technology Beijing, Beijing, 100083, China

    Yong Zang

Authors
  1. Xiaobin Fan
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yong Zang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Ke Jin
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Xiaobin Fan.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Fan, X., Zang, Y. & Jin, K. Research on strip hysteretic behavior and mill vertical vibration system nonlinear dynamics. Appl. Phys. A 122, 877 (2016). https://doi.org/10.1007/s00339-016-0410-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s00339-016-0410-3

Keywords

Search

Navigation