Abstract
We studied active haptic discrimination of the geometrical features of an object. The geometrical parameters under investigation were the amplitude and width of a gaussian-shaped surface. Haptic discrimination thresholds were measured with regard to three values of these geometrical parameters. We found that humans discriminate up to about 300 shapes when both amplitude and width are extrapolated to the range between 1 μm and 1 m. Over this range, which covers the span of the arms, the number of discriminations is small compared to the number across the full range of chromaticities in vision. Roughly speaking, humans are far better at discriminating sharp (extensive amplitude and little width) gaussian surfaces from smooth (small amplitude and extensive width) ones than they are at discriminating small (small amplitude and width) surfaces from large (extensive amplitude and width) ones. Our main conclusion is that discrimination in the geometrical domain is poorest when the proportion between amplitude and width is roughly the same for both shapes. Our results are in close agreement with results of earlier experiments on detection thresholds. This indicates that similar, or even the same, neural mechanisms were used for detection and discrimination of the geometrical parameters under investigation.
Similar content being viewed by others
Author information
Authors and Affiliations
Corresponding author
Additional information
This research was supported by the Netherlands Organization for Scientific Research (NWO)
Rights and permissions
About this article
Cite this article
Louw, S., Kappers, A.M.L. & Koenderink, J.J. Haptic discrimination of stimuli varying in amplitude and width. Exp Brain Res 146, 32–37 (2002). https://doi.org/10.1007/s00221-002-1148-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00221-002-1148-z