Abstract
This paper examines a usually neglected gouge phenomenon in tool-path planning for machining parts having freeform surfaces with 3-axis ball-end mills. That is, when a freeform surface is being milled with a ball-end cutter, a gouge may exist anywhere around the cutter circumference, in addition to the tool driving plane. A global gouge detection concept is developed to solve this problem. An effective method is proposed to identify the potential gouge areas on the sculptured surface during machining, before generating tool paths. Thus, it greatly simplifies the tool-path planning procedure and improves the accuracy and reliability of machining. It also facilitates geometric design processes of products and cutter radius selection which are crucial to machining efficiency. The designed part surfaces tested by the proposed methodology are constructed based on bicubic B2-splines and are assumed to be at least C
2 and may possess C 1 or C 0 continuity for generality. The tested examples demonstrate the effectiveness of the developed global gouge detection approach.
Similar content being viewed by others
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Zhou, L., Lin, YJ. An Effective Global Gouge Detection in Tool-Path Planning for Freeform Surface Machining. Int J Adv Manuf Technol 18, 461–473 (2001). https://doi.org/10.1007/s0017010180461
Published:
Issue Date:
DOI: https://doi.org/10.1007/s0017010180461