Skip to main content

Advertisement

Springer Nature Link
Log in

A hybrid remaining useful life prediction method for cutting tool considering the wear state

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Accurate cutting tool remaining useful life (RUL) prediction is of significance to guarantee the cutting quality and minimize the production cost. Recently, physics-based and data-driven methods have been widely used in the tool RUL prediction. The physics-based approaches may not accurately describe the time-varying wear process due to a lack of knowledge for underlying physics and simplifications involved in physical models, while the data-driven methods may be easily affected by the quantity and quality of data. To overcome the drawbacks of these two approaches, a hybrid prognostics framework considering tool wear state is developed to achieve an accurate prediction. Firstly, the mapping relationship between the sensor signal and tool wear is established by support vector regression (SVR). Then, the tool wear statuses are recognized by support vector machine (SVM), and the results are put into a Bayesian framework as prior information. Thirdly, based on the constructed Bayesian framework, the tool wear model parameters are updated iteratively by the sliding time window and particle filter algorithm. Finally, the tool wear state space and RUL can be predicted accordingly using the updating tool wear model. The validity of the proposed method is demonstrated by a high-speed machine tool experiment. The results show that the presented approach can effectively reduce the uncertainty of tool wear state estimation and improve the accuracy of RUL prediction.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13

Similar content being viewed by others

Data availability

Data related to this work will be provided upon request.

Code availability

Part of the code can be provided upon request for noncommercial purpose.

References

  1. Sun H, Liu Y, Pan J, Zhang J, Ji W (2020) Enhancing cutting tool sustainability based on remaining useful life prediction. J Clean Prod 244(118):794. https://doi.org/10.1016/j.jclepro.2019.118794

    Article  Google Scholar 

  2. Kurada S, Bradley C (1997) A review of machine vision sensors for tool condition monitoring. Comput Ind 34(1):55–72. https://doi.org/10.1016/S0166-3615(96)00075-9

    Article  Google Scholar 

  3. Yang Y, Guo Y, Huang Z, Chen N, Li L, Jiang Y, He N (2019) Research on the milling tool wear and life prediction by establishing an integrated predictive model. Measurement 145:178–189. https://doi.org/10.1016/j.measurement.2019.05.009

    Article  Google Scholar 

  4. Liao L, Köttig F (2016) A hybrid framework combining data-driven and model-based methods for system remaining useful life prediction. Appl Soft Comput 44:191–199. https://doi.org/10.1016/j.asoc.2016.03.013

    Article  Google Scholar 

  5. Yen YC, Söhner J, Lilly B, Altan T (2004) Estimation of tool wear in orthogonal cutting using the finite element analysis. J Mater Process Technol 146(1):82–91. https://doi.org/10.1016/S0924-0136(03)00847-1

    Article  Google Scholar 

  6. Kadirgama K, Abou-El-Hossein K, Noor M, Sharma K, Mohammad B (2011) Tool life and wear mechanism when machining Hastelloy C-22HS. Wear 270(3–4):258–268. https://doi.org/10.1016/j.wear.2010.10.067

  7. Hatt O, Crawforth P, Jackson M (2017) On the mechanism of tool crater wear during titanium alloy machining. Wear 374:15–20. https://doi.org/10.1016/j.wear.2016.12.036

    Article  Google Scholar 

  8. Malakizadi A, Shi B, Hoier P, Attia H, Krajnik P (2020) Physics-based approach for predicting dissolution–diffusion tool wear in machining. Cirp Ann-Manuf Techn 69(1):81–84. https://doi.org/10.1016/j.cirp.2020.04.040

    Article  Google Scholar 

  9. Pálmai Z (2013) Proposal for a new theoretical model of the cutting tool’s flank wear. Wear 303(1–2):437–445. https://doi.org/10.1016/j.wear.2013.03.025

    Article  Google Scholar 

  10. Attanasio A, Ceretti E, Rizzuti S, Umbrello D, Micari F (2008) 3D finite element analysis of tool wear in machining. CIRP Ann 57(1):61–64. https://doi.org/10.1016/j.cirp.2008.03.123

    Article  Google Scholar 

  11. Wang J, Wang P, Gao RX (2015) Enhanced particle filter for tool wear prediction. J Manuf Syst 36:35–45. https://doi.org/10.1016/j.jmsy.2015.03.005

    Article  Google Scholar 

  12. Galante G, Lombardo A, Passannanti A (1998) Tool-life modelling as a stochastic process. Int J Mach Tools Manuf 38(10–11):1361–1369. https://doi.org/10.1016/S0890-6955(98)00019-4

    Article  Google Scholar 

  13. Sun H, Pan J, Zhang J, Cao D (2020) Non-linear Wiener process–based cutting tool remaining useful life prediction considering measurement variability. Int J Adv Manuf Technol 107(11):4493–4502. https://doi.org/10.1007/s00170-020-05264-3

    Article  Google Scholar 

  14. Beibei Z, Jing C, Kang C (2016) Residual life prediction for tungsten carbide coatings based on Gamma process. Trans Nanjing Univ Aeronaut Astronaut 48(6):884–889. https://doi.org/10.16356/j.1005-2615.2016.06.016

  15. Huang Y, Lu Z, Dai W, Zhang W, Wang B (2021) Remaining useful life prediction of cutting tools using an inverse Gaussian process model. Appl Sci 11(11):5011. https://doi.org/10.3390/app11115011

    Article  Google Scholar 

  16. Lei Y, Yang B, Jiang X, Jia F, Li N, Nandi AK (2020) Applications of machine learning to machine fault diagnosis: a review and roadmap. Mech Syst Signal Process 138:106,587. j.ymssp.2019.106587

  17. D’Addona DM, Ullah AS, Matarazzo D (2017) Tool-wear prediction and pattern-recognition using artificial neural network and DNA-based computing. J Intell Manuf 28(6):1285–1301. https://doi.org/10.1007/s10845015-1155-0

    Article  Google Scholar 

  18. Twardowski P, Wiciak-Pikuła M (2019) Prediction of tool wear using artificial neural networks during turning of hardened steel. Materials 12(19):3091. https://doi.org/10.3390/ma12193091

    Article  Google Scholar 

  19. Benkedjouh T, Medjaher K, Zerhouni N, Rechak S (2015) Health assessment and life prediction of cutting tools based on support vector regression. J Intell Manuf 26(2):213–223. https://doi.org/10.1007/s10845-013-0774-6

    Article  Google Scholar 

  20. Cheng M, Jiao L, Shi X, Wang X, Yan P, Li Y (2020) An intelligent prediction model of the tool wear based on machine learning in turning high strength steel. P I Mech Eng B-J Eng 234(13):1580–1597. https://doi.org/10.1177/0954405420935787

    Article  Google Scholar 

  21. Li W, Liu T (2019) Time varying and condition adaptive hidden Markov model for tool wear state estimation and remaining useful life prediction in micro-milling. Mech Syst Signal Process 131:689–702. https://doi.org/10.1016/j.ymssp.2019.06.021

    Article  Google Scholar 

  22. Zhu K, Liu T (2017) Online tool wear monitoring via hidden semi-Markov model with dependent durations. IEEE Trans Industr Inform 14(1):69–78. https://doi.org/10.1109/TII.2017.2723943

    Article  MathSciNet  Google Scholar 

  23. Xu X, Wang J, Zhong B, Ming W, Chen M (2021) Deep learning-based tool wear prediction and its application for machining process using multi-scale feature fusion and channel attention mechanism. Measurement 177(109):254. https://doi.org/10.1016/j.measurement.2021.109254

    Article  Google Scholar 

  24. An Q, Tao Z, Xu X, El Mansori M, Chen M (2020) A data-driven model for milling tool remaining useful life prediction with convolutional and stacked LSTM network. Measurement 154(107):461. https://doi.org/10.1016/j.measurement.2019.107461

    Article  Google Scholar 

  25. Marani M, Zeinali M, Songmene V, Mechefske CK (2021) Tool wear prediction in high-speed turning of a steel alloy using long short-term memory modelling. Measurement 177(109):329. https://doi.org/10.1016/j.measurement.2021.109329

    Article  Google Scholar 

  26. Li H, Wang W, Li Z, Dong L, Li Q (2020) A novel approach for predicting tool remaining useful life using limited data. Mech Syst Signal Process 143(106):832. https://doi.org/10.1016/j.ymssp.2020.106832

    Article  Google Scholar 

  27. Sun H, Cao D, Zhao Z, Kang X (2018) A hybrid approach to cutting tool remaining useful life prediction based on the Wiener process. IEEE Trans Reliab 67(3):1294–1303. https://doi.org/10.1109/tr.2018.2831256

    Article  Google Scholar 

  28. Wang J, Li Y, Zhao R, Gao RX (2020) Physics guided neural network for machining tool wear prediction. J Manuf Syst 57:298–310. https://doi.org/10.1016/j.jmsy.2020.09.005

    Article  Google Scholar 

  29. Wang P, Gao RX (2015) Adaptive resampling-based particle filtering for tool life prediction. J Manuf Syst 37:528–534. https://doi.org/10.1016/j.jmsy.2015.04.006

    Article  Google Scholar 

  30. Pang CK, Zhou JH, Yan HC (2014) PDF and breakdown time prediction for unobservable wear using enhanced particle filters in precognitive maintenance. IEEE Trans Instrum Meas 64(3):649–659. https://doi.org/10.1109/TIM.2014.2351312

    Article  Google Scholar 

  31. Yang B, Guo K, Liu J, Sun J, Song G, Zhu S, Sun C, Jiang Z (2020) Vibration singularity analysis for milling tool condition monitoring. Int J Mech Sci 166(105):254. https://doi.org/10.1016/j.ijmecsci.2019.105254

    Article  Google Scholar 

  32. Archard J (1953) Contact and rubbing of flat surfaces. J Appl Phys 24(8):981–988. https://doi.org/10.1063/1.1721448

    Article  Google Scholar 

  33. Choudhury S, Srinivas P (2004) Tool wear prediction in turning. J Mater Process Technol 153:276–280. https://doi.org/10.1016/j.jmatprotec.2004.04.296

    Article  Google Scholar 

  34. Cortes C, Vapnik V (1995) Support-vector networks. Mach Learn 20(3):273–297. https://doi.org/10.1007/BF00994018

    Article  MATH  Google Scholar 

  35. Colpani A, Fiorentino A, Ceretti E, Attanasio A (2019) Tool wear analysis in micromilling of titanium alloy. Precis Eng 57:83–94. https://doi.org/10.1016/j.precisioneng.2019.03.011

    Article  Google Scholar 

  36. Arulampalam MS, Maskell S, Gordon N, Clapp T (2002) A tutorial on particle filters for online nonlinear/non-Gaussian Bayesian tracking. IEEE Trans Signal Process 50(2):174–188. https://doi.org/10.1109/78.978374

    Article  Google Scholar 

  37. Li T, Bolic M, Djuric PM (2015) Resampling methods for particle filtering: classification, implementation, and strategies. IEEE Signal Process Mag 32(3):70–86. https://doi.org/10.1109/MSP.2014.2330626

    Article  Google Scholar 

  38. Kim HG, Park YH, Cho YH, Kim MH (2014) Time-slide window join over data streams. J Intell Inf Syst 43(2):323–347. https://doi.org/10.1007/s10844-014-0325-4

    Article  Google Scholar 

  39. Li X, Lim B, Zhou J, Huang S, Phua S, Shaw K, Er M (2009) Fuzzy neural network modelling for tool wear estimation in dry milling operation. In: Annual Conference of the PHM Society

  40. Van der Maaten L, Hinton G (2008) Visualizing data using t-SNE. J Mach Learn Res 9(11)

Download references

Funding

This work is supported by the National Natural Science Foundation of China (Grant No. 51475425).

Author information

Authors and Affiliations

  1. College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou, Zhejiang, 310014, People’s Republic of China

    Yifan Li, Yongyong Xiang, Baisong Pan & Luojie Shi

Authors
  1. Yifan Li
    View author publications

    You can also search for this author inPubMed Google Scholar

  2. Yongyong Xiang
    View author publications

    You can also search for this author inPubMed Google Scholar

  3. Baisong Pan
    View author publications

    You can also search for this author inPubMed Google Scholar

  4. Luojie Shi
    View author publications

    You can also search for this author inPubMed Google Scholar

Contributions

Yifan Li: conceptualization, methodology, software, writing—original draft preparation. Yongyong Xiang: investigation, writing—original draft preparation. Baisong Pan: data curation, software, validation, writing—reviewing and editing. Luojie Shi: resources, supervision.

Corresponding author

Correspondence to Baisong Pan.

Ethics declarations

Ethics approval

The manuscript has only communicated to one journal only and has not submitted to more than one journal for simultaneous consideration.

Consent to participate

The authors have given their consent to participate.

Consent for publication

The authors have given their consent to publish the present paper.

Conflict of interest

The authors declare no competing interests.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Li, Y., Xiang, Y., Pan, B. et al. A hybrid remaining useful life prediction method for cutting tool considering the wear state. Int J Adv Manuf Technol 121, 3583–3596 (2022). https://doi.org/10.1007/s00170-022-09417-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-022-09417-4

Keywords