Skip to main content
SpringerLink
Log in

Nanometric surface finishing of typical industrial components by abrasive flow finishing

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

The evolution of ultra precision finishing processes due to the continuous demand of stringent functional and technological requirement of the components has led to the emergence and development of the non-conventional abrasive flow finishing (AFF) process. This could be attributed to the need for relaxation of tool limitations: precise finishing of complex geometries and internal passages in typical industrial components. Herein, the abrasive laden polymer conforms onto the work piece geometry due to its flow characteristics overcoming the shape limitations inherent in conventional finishing processes. The paper describes nanometric surface finishing of typical prosthetic implants and an extrusion die used in bio-medical and pharmaceutical industries, respectively. Finishing and deburring of a propeller and a shuttle valve used in aerospace applications are also discussed. The study highlights the possibility of successful extension and implementation of AFF process in simultaneous ultra precision finishing applications of industrial components. The versatility, functional, and stochastic aspect of the developed AFF system in surface finishing of ferrous and non-ferrous components is also emphasized.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Rhoades LJ (1988) Abrasive flow machining. Manuf Eng 75–78

  2. Jain RK, Jain VK (2003) Effects of operating parameters on the performance of abrasive flow machining process. Proceedings of 20th AIMTDR, Guwahati, pp 224–229

    Google Scholar 

  3. Rhoades LJ (1987) Abrasive flow machining with not so silly putty. Metal Finish 27–29

  4. Jain RK, Jain VK (1999) Abrasive fine finishing processes—a review. Int Manuf Sci Prod 2:61–69

    Google Scholar 

  5. Balashanmugam N, Kavithaa TS, Varun R, Shashi Kumar PV (2013) Abrasive flow finishing of modular head of a hip joint. Proceedings of the National Conference on Manufacturing: Vision for Future, Guwahati

    Google Scholar 

  6. Kavithaa TS, Balashanmugam N, Shashi Kumar PV (2016) Nanometric finishing on biomedical implants by abrasive flow finishing. J Inst Eng Ind Ser C 97:55–61

  7. Gov K, Eyercioglu O, Cakir MV (2013) Hardness effects on abrasive flow machining. J Mech Eng 5910:626–631

    Article  Google Scholar 

  8. Kenda J, Pusavec F, Kermouche G, Kopac J (2011) Surface integrity in abrasive flow machining of hardened tool steel AISI D2. Proc Eng 19:172–177

    Article  Google Scholar 

  9. Ajay Sidpara M, Jain VK (2012) Nanofinishing of free form surfaces of prosthetic knee joint implant. In Proceedings of the Institution of Mechanical Engineers. Part B: J Eng Manuf 22611:1833–1846

    Google Scholar 

  10. Fred Marshall D, Joseph Cotroneo A (1989) Maximizing compressor efficiency while maintaining reliability. Proceedings of the 18th Turbo Machinery Symposium, 91–100

  11. Cherian J, Jeoju Isaac M (2011) Optimization of process parameters in abrasive flow machining with particle swarm optimization. Int J Mod Eng Res 1:193–195

    Google Scholar 

  12. William RE, Rajurkar KP (1989) Metal removal and surface finish characteristics in abrasive flow machining. ASME PED 38:93–106

    Google Scholar 

  13. Abbas Ibrahim F, Saad Shather K, Wissam Hamdan K (2014) Studying abrasive flow machining conditions by using Taguchi method. Eng Tech J Part (A) 324:1071–1082

    Google Scholar 

  14. Davies PJ, Fletcher AJ (1995) The assessment of the rheological characteristics of various polyborosiloxane /grit mixtures as utilized in the abrasive flow machining process. Proc Inst Mech Eng C J Mech Eng Sci 2096:409–418

    Article  Google Scholar 

  15. Singh M, Mittal S (2015) Effect of process variables on material removal rate during finishing of Al-6061 alloy using abrasive flow machining. Int J Curr Eng Technol 5:2249–2453

    Google Scholar 

  16. Jain VK, Adsul SG (2000) Experimental investigations into abrasive flow machining. Int J Mach Tools Manuf 40:1003–1021

    Article  Google Scholar 

  17. Williams RE, Rajurkar KP (1994) Monitoring of abrasive flow machining process using acoustic emission. Proc 1st S M Wu Symp Manuf Sci 1:35–41

    Google Scholar 

  18. Gorana VK, Jain VK, Lal GK (2004) Experimental investigation into cutting forces and active grain density during abrasive flow machining. Int J Mach Tools Manuf 44:201–211

    Article  Google Scholar 

  19. Rhoades LJ (1985) Abrasive flow machining and its uses. Non-traditional Machining. Conference Proceedings, Ohio, pp 111–120

    Google Scholar 

  20. Rhoades LJ (1991) Abrasive flow machining: a case study. J Mater Process Technol 28:107–116

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Sensors and Vision Technology Division, Central Manufacturing Technology Institute, Bangalore, 560022, India

    T. S. Kavithaa

  2. Nano Manufacturing Technology Centre, Central Manufacturing Technology Institute, Bangalore, 560022, India

    N. Balashanmugam

Authors
  1. T. S. Kavithaa
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. N. Balashanmugam
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to T. S. Kavithaa.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kavithaa, T.S., Balashanmugam, N. Nanometric surface finishing of typical industrial components by abrasive flow finishing. Int J Adv Manuf Technol 85, 2189–2196 (2016). https://doi.org/10.1007/s00170-016-8486-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-016-8486-7

Keywords

Search

Navigation