Abstract
The effect of friction stir welding (FSW) on the pitting corrosion resistance of a lean duplex stainless steel was investigated in chloride-containing and chloride-free electrolytes. FSW was carried out by employing a constant rotation speed of 800 rpm at the welding speeds of 50, 100, and 150 mm/min using WC-based tool. Cyclic polarization results showed the same corrosion resistance of the base metal and welded joints in 0.1 M H2SO4. The optical microscopy observations after cyclic polarization tests revealed that no signs of pitting corrosion were evident for the base metal and different FS welds in chloride-free 0.1 M H2SO4 solution. In contrast, a wide positive hysteresis loop indicative of pitting corrosion susceptibility was displayed for the base metal and FS welds in 0.1 M H2SO4 + 0.1 M NaCl solution. The optical micrographs of pitting corrosion in the base metal and various FS welds demonstrated that the size of pits was decreased and the number of pits was increased after FSW. It was also found that increasing the welding speed led to an increase in the number of pits and a decrease in the size of pits. In other words, the resistance to pit growth was improved by decreasing the heat input during FSW. These results were interpreted with respect to the noticeable grain refinement that occurred during FSW.
Similar content being viewed by others
References
Thomas WM, Nicholas ED, Needham JC, Church MG, Templesmith P, Dawes CJ (1991) Friction stir welding. In: International Patent Application no. PCT/GB92102203
Dehghani K, Ghorbani R, Soltanipoor A (2014) Microstructural evolution and mechanical properties during the friction stir welding of 7075-O aluminum alloy. Int J Adv Manuf Technol:1–9
Çam G, Mistikoglu S (2014) Recent developments in friction stir welding of Al-alloys. J Materi Eng Perform 23(6):1936–1953. doi:10.1007/s11665-014-0968-x
Cui L, Fujii H, Tsuji N, Nogi K (2007) Friction stir welding of a high carbon steel. Scr Mater 56(7):637–640
Matsushita M, Kitani Y, Ikeda R, Oi K, Fujii H (2013) Development of friction stir welding of high strength steel sheet. In: Fujii H (ed) Proceedings of the 1st International Joint Symposium on Joining and Welding. Woodhead, pp 87–93. doi: http://dx.doi.org/10.1533/978-1-78242-164-1.87
Lakshminarayanan A, Balasubramanian V (2012) Sensitization resistance of friction stir welded AISI 409 M grade ferritic stainless steel joints. Int J Adv Manuf Technol 59(9–12):961–967
Çam G (2011) Friction stir welded structural materials: beyond Al-alloys. Int Mater Rev 56(1):1–48. doi:10.1179/095066010X12777205875750
Lippold JC, Rodelas JM, Rule JR (2013) Friction stir processing of Ni-base alloys. In: Fujii H (ed) Proceedings of the 1st International Joint Symposium on Joining and Welding. Woodhead, pp 369–376. doi:http://dx.doi.org/10.1533/978-1-78242-164-1.369
Ureña A, Otero E, Utrilla MV, Múnez CJ (2007) Weldability of a 2205 duplex stainless steel using plasma arc welding. J Mater Process Technol 182(1–3):624–631. doi:10.1016/j.jmatprotec.2006.08.030
Lippold JC, Kotecki DJ (2005) Welding metallurgy and weldability of stainless steels. Wiley
Sato Y, Nelson T, Sterling C, Steel R, Pettersson C-O (2005) Microstructure and mechanical properties of friction stir welded SAF 2507 super duplex stainless steel. Mater Sci Eng A 397(1):376–384
Cam G, Erim S, Yeni C, Kocak M (1999) Determination of mechanical and fracture properties of laser beam welded steel joints. Welding J-New York 78:193-s
Çam G, Yeni Ç, Erim S, Ventzke V, Koçak M (1998) Investigation into properties of laser welded similar and dissimilar steel joints. Sci Technol Weld Join 3(4):177–189. doi:10.1179/stw.1998.3.4.177
Saeid T, Abdollah-Zadeh A, Assadi H, Ghaini FM (2008) Effect of friction stir welding speed on the microstructure and mechanical properties of a duplex stainless steel. Mater Sci Eng A 496(1):262–268
Okamoto K, Hirano S, Inagaki M, Park S, Sato Y, Kokawa H, Nelson T, Sorensen C (2003) Metallurgical and mechanical properties of friction stir welded stainless steels. In: Proc Fourth Int Sym Friction Stir Welding, pp 14–16
Santos TF, Marinho RR, Paes MT, Ramirez AJ (2013) Microstructure evaluation of UNS S32205 duplex stainless steel friction stir welds. Rem: Revista Escola de Minas 66(2):187–191
Steel R, Sterling C (2004) Friction stir welding of 2205 duplex stainless and 3Cr12 steels. In: Proc. 14th Int. Conf. on ‘Offshore and polar engineering’. Toulon, France, pp 67–73
Esmailzadeh M, Shamanian M, Kermanpur A, Saeid T (2013) Microstructure and mechanical properties of friction stir welded lean duplex stainless steel. Mater Sci Eng A 561:486–491
Santos T, Ramirez A, Queiroz R (2011) Correlating microstructure and performance of UNS S32750 and S32760 superduplex stainless steels friction stir welds. Proc twenty-first Int Offshore Polar Eng Conf, Maui:534–540
Sarlak H, Atapour M, Esmailzadeh M (2015) Corrosion behavior of friction stir welded lean duplex stainless steel. Mater Des 66:209–216
Siow K, Song T, Qiu J (2001) Pitting corrosion of duplex stainless steels. Anti-Corrosion Methods Materials 48(1):31–37
Turnbull A, Francis PE, Ryan MP, Orkney LP, Griffiths AJ, Hawkins B (2002) A novel approach to characterizing the corrosion resistance of super duplex stainless steel welds. Corrosion 58(12):1039–1048. doi:10.5006/1.3280793
Kang D, Lee H (2013) Study of the correlation between pitting corrosion and the component ratio of the dual phase in duplex stainless steel welds. Corros Sci 74:396–407
Garfias-Mesias LF, Sykes JM, Tuck CDS (1996) The effect of phase compositions on the pitting corrosion of 25 Cr duplex stainless steel in chloride solutions. Corros Sci 38(8):1319–1330. doi:10.1016/0010-938X(96)00022-4
Tan H, Wang Z, Jiang Y, Yang Y, Deng B, Song H, Li J (2012) Influence of welding thermal cycles on microstructure and pitting corrosion resistance of 2304 duplex stainless steels. Corros Sci 55:368–377
Cervo R, Ferro P, Tiziani A, Zucchi F (2010) Annealing temperature effects on superduplex stainless steel UNS S32750 welded joints. II: pitting corrosion resistance evaluation. J Mater Sci 45(16):4378–4389. doi:10.1007/s10853-010-4311-0
Symniotis E (1990) Galvanic effects on the active dissolution of duplex stainless steels. Corrosion 46(1):2–12. doi:10.5006/1.3585062
Aldykiewicz AJ Jr, Isaacs HS (1998) Dissolution characteristics of duplex stainless steels in acidic environments. Corros Sci 40(10):1627–1646. doi:10.1016/S0010-938X(98)00053-5
Potgieter J, Olubambi P, Cornish L, Machio C, Sherif E-SM (2008) Influence of nickel additions on the corrosion behaviour of low nitrogen 22% Cr series duplex stainless steels. Corros Sci 50(9):2572–2579
Femenia M, Pan J, Leygraf C, Luukkonen P (2001) In situ study of selective dissolution of duplex stainless steel 2205 by electrochemical scanning tunnelling microscopy. Corros Sci 43(10):1939–1951
Olsson C-O, Landolt D (2003) Passive films on stainless steels—chemistry, structure and growth. Electrochim Acta 48(9):1093–1104
Tavara S, Chapetti M, Otegui J, Manfredi C (2001) Influence of nickel on the susceptibility to corrosion fatigue of duplex stainless steel welds. Int J Fatigue 23(7):619–626
Zhang Z, Wang Z, Jiang Y, Tan H, Han D, Guo Y, Li J (2012) Effect of post-weld heat treatment on microstructure evolution and pitting corrosion behavior of UNS S31803 duplex stainless steel welds. Corros Sci 62:42–50
Yang Y, Yan B, Li J, Wang J (2011) The effect of large heat input on the microstructure and corrosion behaviour of simulated heat affected zone in 2205 duplex stainless steel. Corros Sci 53(11):3756–3763
Aquino J, Della Rovere C, Kuri S (2008) Localized corrosion susceptibility of supermartensitic stainless steel in welded joints. Corrosion 64(1):35–39
Zhang L, Jiang Y, Deng B, Zhang W, Xu J, Li J (2009) Effect of aging on the corrosion resistance of 2101 lean duplex stainless steel. Mater Charact 60(12):1522–1528
Chunchun X, Gang H (2004) Effect of deformation-induced martensite on the pit propagation behavior of 304 stainless steel. Anti-Corrosion Methods Materials 51(6):381–388
Barbucci A, Delucchi M, Panizza M, Sacco M, Cerisola G (2001) Electrochemical and corrosion behaviour of cold rolled AISI 301 in 1 MH 2 SO 4. J Alloys Compd 317:607–611
Moura V, Lima L, Pardal J, Kina A, Corte R, Tavares S (2008) Influence of microstructure on the corrosion resistance of the duplex stainless steel UNS S31803. Mater Charact 59(8):1127–1132
Kutz M (2002) Handbook of materials selection. Wiley Online Library
Di Schino A, Kenny J (2002) Effects of the grain size on the corrosion behavior of refined AISI 304 austenitic stainless steels. J Mater Sci Lett 21(20):1631–1634
Antony P, Raman RS, Kumar P, Raman R (2008) Corrosion of 2205 duplex stainless steel weldment in chloride medium containing sulfate-reducing bacteria. Metall Mat Trans A 39(11):2689–2697
Reddy G, Rao K, Sekhar T (2008) Microstructure and pitting corrosion of similar and dissimilar stainless steel welds. Sci Technol Welding Joining 13(4):363–377
Meng G, Wei L, Zhang T, Shao Y, Wang F, Dong C, Li X (2009) Effect of microcrystallization on pitting corrosion of pure aluminium. Corros Sci 51(9):2151–2157
Hamada A, Karjalainen L, Somani M (2006) Electrochemical corrosion behaviour of a novel submicron-grained austenitic stainless steel in an acidic NaCl solution. Mater Sci Eng A 431(1):211–217
Jinlong L, Hongyun L (2013) Comparison of corrosion properties of passive films formed on phase reversion induced nano/ultrafine-grained 321 stainless steel. Appl Surf Sci 280:124–131
Wang X, Li D (2002) Mechanical and electrochemical behavior of nanocrystalline surface of 304 stainless steel. Electrochim Acta 47(24):3939–3947
Liu L, Li Y, Wang F (2007) Influence of micro-structure on corrosion behavior of a Ni-based superalloy in 3.5% NaCl. Electrochim Acta 52(25):7193–7202
Eghlimi A, Shamanian M, Raeissi K (2014) Effect of current type on microstructure and corrosion resistance of super duplex stainless steel claddings produced by the gas tungsten arc welding process. Surf Coat Technol 244:45–51
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Atapour, M., Sarlak, H. & Esmailzadeh, M. Pitting corrosion susceptibility of friction stir welded lean duplex stainless steel joints. Int J Adv Manuf Technol 83, 721–728 (2016). https://doi.org/10.1007/s00170-015-7601-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-7601-5