Skip to main content
Log in

Fabrication of PDMS micro through-holes for electrochemical micromachining

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Surface texture has played a fundamental role in the development of many advanced fields. Through mask electrochemical micromachining (TMEMM) is a feasible alternative for fabricating surface textures. In this paper, polydimethylsiloxane (PDMS) is firstly employed as a mask in TMEMM due to its chemical resistance, low cost, flexibility and high moulding capability. A simple method for fabricating PDMS micro through-holes is proposed. A vacuum-aided process was introduced to fill a PDMS gel into an SU-8 mould, and the PDMS gel was solidified in an oven. Then, the cured PDMS micro through-holes were peeled off of the SU-8 mould. PDMS micro holes with a minimum diameter of 50 μm and a thickness of 200 μm were obtained. Furthermore, the PDMS micro through-holes were then used as a mask to prepare a micro dimple array by TMEMM. Experiments were conducted to verify the feasibility of the proposed approach, and the effect of applied voltage and machining time on the diameter and depth of the micro dimple was investigated. Finally, an array of micro dimples 109 μm in diameter and 9.7 μm deep was successfully fabricated by using PDMS.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Bruzzone AAG, Costa HL, Lonardo PM, Lucca DA (2008) Advances in engineered surfaces for functional performance. CIRP Ann Manuf Technol 57(2):750–769

    Article  Google Scholar 

  2. Silk EA, Kim J, Kiger K (2006) Spray cooling of enhanced surfaces: impact of structured surface geometry and spray axis inclination. Int J Heat Mass Transf 49(25–26):4910–4920

    Article  Google Scholar 

  3. Hintze W, Essen A, Wurfels K (1998) Tool for material-removing machining. US Patent 5:510–520

    Google Scholar 

  4. Evans CJ, Bryan JB (1999) Structured, textured or engineered surfaces. CIRP Ann Manuf Technol 48(2):541–556

    Article  Google Scholar 

  5. Wakuda M, Yamauchi Y, Kanzaki S, Yasuda Y (2003) Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact. Wear 254:356–363

    Article  Google Scholar 

  6. Fujiwasa N, Poole-Warren LA, Woodard JC, Bertram CD, Schindhelm K (1999) A novel textured surface for blood contact. Biomaterials 10(20):955–962

    Article  Google Scholar 

  7. Munda J, Bhattacharyya B (2008) Investigation into electrochemical micromachining (EMM) through response surface methodology based approach. Int J Adv Manuf Technol 35(7–8):821–832

    Article  Google Scholar 

  8. Rajurkar KP, Zhu D, Mcgeough JA, Kozak J, Silva AD (1999) New developments in electro-chemical machining. Annals CIRP 48(2):567–579

    Article  Google Scholar 

  9. Lee ES, Baek SY, Cho CR (2007) A study of the characteristics for electrochemical micromachining with ultrashort voltage pulses. Int J Adv Manuf Technol 31:762–769

    Article  Google Scholar 

  10. Asokan P, Kumar RR, Jeyapaul R, Santhi M (2008) Development of multi-objective optimization models for electrochemical machining process. Int J Adv Manuf Technol 39:55–63

    Article  Google Scholar 

  11. Hocheng H, Kao PS, Lin SC (2005) Development of the eroded opening during electro chemical boring of hole. Int J Adv Manuf Technol 25:1105–1112

    Article  Google Scholar 

  12. Madore C, Landolt D (1997) Electrochemical micromachining of controlled topographies on titanium for biological applications. J Micromech Microeng 7:270–275

    Article  Google Scholar 

  13. Hao XQ, Wang L, Wang QD, Guo FL, Tang YP, Ding YC, Lu BH (2011) Surface micro-texturing of metallic cylindrical surface with proximityrolling-exposure lithography and electrochemical micromachining. Appl Surf Sci 257:8906–8911

    Article  Google Scholar 

  14. Chauvy PF, Hoffmann P, Landolt D (2001) Electrochemical micromachining of titanium through a laser patterned oxide film. Electrochem Solid-State Lett 4(5):C31–C34

    Article  Google Scholar 

  15. Qian SQ, Zhu D, Qu NS, Li HS, Yan DS (2010) Generating micro-dimples array on the hard chrome-coated surface by modified through mask electrochemical micromachining. Int J Adv Manuf Technol 47:1121–1127

    Article  Google Scholar 

  16. Nouraei S, Roy S (2008) Electrochemical process for micropattern transfer without photolithography: a modeling analysis. J Electrochem Soc 155(2):D97–D103

    Article  Google Scholar 

  17. Kang JH, Um E, Park JK (2009) Fabrication of a poly(dimethylsiloxane) membrane with well-defined through-holes for three-dimensional microfluidic networks. J Micromech Microeng 19:045027

    Article  Google Scholar 

  18. Choi J, Lee KH, Yang S (2011) Fabrication of PDMS through-holes using the MIMIC method and the surface treatment by atmospheric-pressure CH4/He RF plasma. J Micromech Microeng 21:097001

    Article  Google Scholar 

  19. Lee SW, Lee SS (2008) Shrinkage ratio of PDMS and its alignment method for the wafer level process. Microsyst Technol 14:205–208

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Ningsong Qu.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Qu, N., Chen, X., Li, H. et al. Fabrication of PDMS micro through-holes for electrochemical micromachining. Int J Adv Manuf Technol 72, 487–494 (2014). https://doi.org/10.1007/s00170-014-5702-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-014-5702-1

Keywords

Navigation