Skip to main content

Advertisement

Springer Nature Link
Log in

Experimental study of rotary magnetic field-assisted dry EDM with ultrasonic vibration of workpiece

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Dry electrical discharge machining (EDM) is a green machining method which replaces the gas instead of liquid as dielectric medium. Due to the environmentally friendly nature of this method, recently, researchers focused on characterization of this process. In this work, effects of rotary magnetic field and also ultrasonic vibration of workpiece were studied on dry EDM process performance. Conducted experiments were divided in two main stages. At first stage, preliminary experiments were carried out to determine the best tool design in material and geometry points of view by considering the material removal rate (MRR). Also, effect of magnetic field was studied in the first stage. Results of the first stage of experiments indicated that the brass tool with two eccentric holes has the highest MRR rather than the other existing tool. In the second stage of experiments, parametric study on dry EDM process were implemented by using a brass tool with two eccentric holes and by applying rotary magnetic field for all experiments of the second stage. Influences of parameters such as pulse current, pulse on-time, pulse off-time, tool rotational speed, air injection inlet pressure, and especially power of ultrasonic table were studied on MRR, surface roughness (SR), electrode wear rate (EWR), and overcut (OC). Results showed that magnetic field has positive effects on MRR and SR. Also, by application of ultrasonic vibration achieving to superior MRR is feasible. At the end of the work, mathematical models were developed to correlate a relationship between process inputs and main outputs.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

Explore related subjects

Discover the latest articles and news from researchers in related subjects, suggested using machine learning.

References

  1. Ramani V, Cassidenti ML (1985) Inert-Gas Electrical Discharge Machining. NASA Technical Brief Number NPO 15660

  2. Kunieda M, Furuoya S, Taniguchi N (1991) Improvement of EDM efficiency by supplying oxygen gas into gap. CIRP Annals- Manuf Technol 40:215–218

    Article  Google Scholar 

  3. Kunieda M, Yoshida M, Taniguchi N (1997) Electrical discharge machining in gas. CIRP Annals, Manufac Technolo 46:143–146

    Article  Google Scholar 

  4. Saha SK, Choudhury SK (2009) Experimental investigation and empirical modeling of the dry electric discharge machining process. Int J of Mach Tools Manuf 49(3–4):297–308

    Article  Google Scholar 

  5. Govindan P, Joshi SS (2010) Experimental characterization of material removal in dry electrical discharge drilling. Int J of Mach Tools Manuf 50:431–443

    Article  Google Scholar 

  6. Yu Z, Jun T, Kunieda M (2004) Dry electrical discharge machining of cemented carbide. J Mater Process Technol 149(1–3):353–357

    Article  Google Scholar 

  7. Tao J, Shih AJ, Ni J (2008) Experimental study of the dry and near dry electrical discharge milling processes. J Manuf Sci Engin 130(1):1–8

    Google Scholar 

  8. Lin YC, Lee HS (2008) Machining characteristics of magnetic force assisted EDM. Int J of Mach Tools Manuf 48:1179–1186

    Article  Google Scholar 

  9. Chattopadhyay KD, Satangi PS, Verma S, Sherma PC (2008) Analysis of rotary electrical discharge machining characteristics in reversal magnetic field for copper-en8 steel system. Int J Adv Manuf Technol 38:925–937

    Article  Google Scholar 

  10. Abdullah A, Shabgard MR (2008) Effect of ultrasonic vibration of tool on electrical discharge machining of cemented-tungestan carbide (WC-Co). Int J Adv Manuf Technol 38:1137–1147

    Article  Google Scholar 

  11. Ghoraeishi M, Atkinson J (2002) A comparative experimental study of machining characteristics in, vibratory, rotary and vibro-rotary electrical discharge machining. J Mater Process Technol 120:374–384

    Article  Google Scholar 

  12. Zhang QH, Dv R, Zhang JH, Zhang QB (2006) An investigation of ultrasonic-assisted electrical discharge machining in gas. Int J of Mach Tools Manuf 461:582–1588

    Google Scholar 

  13. Ji R, Liu Y, Zhang Y, Cai B, Li H, Ma J (2010) Optimizing machining parameters of silicon carbide ceramics with ED milling and mechanical grinding combined process. International Journal of Advanced Manufacturing Technology 51:195–204

    Article  Google Scholar 

  14. Ji R, Liu Y, Zhang Y, Cai B, Rong S (2010) Electric discharge milling and mechanical grinding compound machining of silicon carbide ceramic. Machining Science and Technology 14:502–521

    Article  Google Scholar 

  15. Ji R, Liu Y, Zhang Y, Cai B, Dong X (2012) Machining performance optimization in end ED milling and mechanical grinding compound process. Materials and Manufacturing Processes 27:221–228

    Article  Google Scholar 

  16. Mohan B, Rajadurai A, Satayanarayana KG (2002) Effect of SiC and rotation of electrode on electric discharge machining of Al-SiC composite. J Mater Process Technol 124:297–304

    Article  Google Scholar 

  17. Kao CC, Tao J, Shih AJ (2007) Near dry electrical discharge machining. Int J Machine Tools and Manufacture 47(15):2273–2281

    Article  Google Scholar 

  18. Young FR (1999), Cavitations, imperial colleges, London

  19. Suslick KS, Didenko Y, Fang MM, Hyeon T, Kolbeck KJ, McNamara WB III, Mdleleni MM, Wong M (1999) Acoustic cavitations and its chemical consequences. Phil Trans R Soc London A 357:335–353

    Article  Google Scholar 

  20. Murthy VSR, Philip PK (1987) Pulse train analysis in ultrasonic assisted EDM. International Journal of Machine Tools and Manufacture 27(4):469–477

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Mechanical Engineering Department, Babol Noshirvani University of Technology, Babol, Iran

    Reza Teimouri & Hamid Baseri

Authors
  1. Reza Teimouri
    View author publications

    You can also search for this author inPubMed Google Scholar

  2. Hamid Baseri
    View author publications

    You can also search for this author inPubMed Google Scholar

Corresponding author

Correspondence to Hamid Baseri.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Teimouri, R., Baseri, H. Experimental study of rotary magnetic field-assisted dry EDM with ultrasonic vibration of workpiece. Int J Adv Manuf Technol 67, 1371–1384 (2013). https://doi.org/10.1007/s00170-012-4573-6

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-012-4573-6

Keywords