Abstract
Stiffened storage tank is an important structural component in spacecraft. Its structural weight is one of the key criterions in the design phase. This paper focuses on the design optimization of the structure by using finite element method, structural sensitivity analysis techniques, and sequential linear/quadratic programming aimed to reduce the structural weight. Design variables include the numbers of stiffeners, stiffeners’ section dimensions, and shell thickness distribution. Detailed finite element modeling processes are presented, which are the ways to construct the stiffener (beam orientation and offset) and shell elements and the ways to determine the analysis model and structural boundary conditions. A brief introduction to sensitivity analysis and optimization solution algorithm is also given. Main attention is paid to the studies of design optimization of the tank structure, including the selection of design cases, evaluation, and comparison of the optimal results. There are six design cases considered in the design procedures. Numerical results show that by using the above computational techniques, the structural weight is effectively reduced. In this work, MSC.Patran/Nastran is employed to construct the Finite Element Model (FEM), and JIFEX, which is developed in our group, is used to conduct the structural design optimization.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Afonso S, Sienz J, Belblidia F (2005) Structural optimization strategies for simple and integrally stiffened plates and shells. Eng Comput 22(3–4):429–452
Belblidia F, Afonso S, Hinton E, Antonino G (1999) Integrated design optimization of stiffened plate structures. Eng Comput 16(8):934–951
Giles G (1999) Design-oriented analysis of aircraft fuselage structures using equivalent plate methodology. J Aircr 36(1):21–28
Gu YX, Zhang HW, Guan ZQ, Kang Z, Li YP, Zhong WX (1999) New generation software of structural analysis and design optimization—JIFEX. Struct Eng Mech 7(6):589–599
Gu YX, Zhao GZ, Zhang HW, Kang Z, Guandhi RV (2000) Buckling design optimization of complex built-up structures with shape and size variables. Struct Multidiscipl Optim 19(3):183–191
Haftka RT, Gurdal Z (1992) Element of structural design optimization, 3rd ed. Netherlands, Kluwer Academic Publishers
Jarmai K, Snyman J, Farkas (2006) Minimum cost design of a welded orthogonally stiffened cylindrical shell. Comput Struct (84):787–797
Lagaros N, Fragiadakis M, Papadrakakis M (2004) Optimum design of shell structures with stiffening beams. AIAA J 42(1):175–184
Lamberti L, Venkataraman S, Haftka R, Johnson F (2003) Preliminary design optimization of stiffened panels using approximate analysis models. Int J Numer Methods Eng 57:1351–1380
Viljoen A, Visser A (2004) Computationally efficient analysis and optimization of stiffened thin-walled panels in shear. J Aircr 42(3):743–747
Vitali R, Park O, Haftka RT, Sankar B (2002) Structural optimization of a hat-stiffened panel using response surfaces. J Aircr 39 (1):158–166
Author information
Authors and Affiliations
Corresponding author
Additional information
JIFEX is a structural analysis and optimization software package developed by Gu and colleagues in the Dalian University of Technology Department of Engineering Mechanics. Among its many functions is the ability to analyze and optimize piezoelectric smart structures.
Rights and permissions
About this article
Cite this article
Chen, B., Liu, G., Kang, J. et al. Design optimization of stiffened storage tank for spacecraft. Struct Multidisc Optim 36, 83–92 (2008). https://doi.org/10.1007/s00158-007-0174-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-007-0174-7