Abstract
The effect of transformation substructure (lath or twinned plates) and its subsequent modification of carbide distribution during tempering on the mechanical properties was investigated in Fe-Ni-Co alloys with and without 0.1 pct carbon. The morphology and substructure of carbon free and 0.1 pct carbon Fe-Ni-Co martensites do not have a significant effect on fracture toughness. The transformation substructure by itself does not control the deformation mode of these martensites. Based on a previously suggested model on factors affecting the mode of deformation, the need for substructure control to maintain desirable mechanical properties of low alloy high strength steels, is again emphasized.
Similar content being viewed by others
References
S. K. Das and G. Thomas:Trans. ASM, 1969, vol. 62, p. 659.
D. H. Huang and G. Thomas:Met. Trans., 1971, vol. 2, p. 1587.
M. Raghavan and G. Thomas:Met. Trans., vol. 2, p. 3433.
J. McMahon and G. Thomas:Third Int. Conf. on Strength of Metals and Alloys, vol. 1, p. 180, Institute of Metals/Iron and Steel Institute, Cambridge, England, August 1973.
R. A. Clark and G. Thomas:Met. Trans. A, vol. 6A, p. 969.
B. V. N. Rao: Ph.D. Thesis, University of California, February 1978; LBL Report no. 7361.
G. Thomas:Met. Trans. A, 1978, vol. 9A, p. 297.
M. Carlson, B. V. N. Rao, R. O. Ritchie, and G. Thomas:Proc. of Int. Conf. on Strength of Metals and Alloys, vol. 2, p. 509, Nancy, France, August/ September 1976.
G. Thomas:Met. Trans., 1971, vol. 2, p. 2373.
P. M. Kelly and J. Nutting:Proc. Royal Soc., 1960, vol. A259, p. 45.
P. M. Kelly and J. Nutting:J. Iron Steel Inst., 1961, vol. 197, p. 199.
J. Chilton and P. M. Kelly:Acta Met., 1968, vol. 16, p. 637.
G. R. Speich and W. C. Leslie:Met. Trans., 1972, vol. 3, p. 1043.
A. R. Marder and G. Krauss:Trans. ASM., 1967, vol. 6, p. 651.
G. R. Speich and P. R. Swann:J. Iron Steel Inst. 1965, vol. 203, p. 480.
A. R. Marder and A. O. Benscoter:Trans. ASM, 1968, vol. 61, p. 293.
C. L. Magee and R. G. Davis:Acta Met., 1971, vol. 19, p. 345.
C. L. Magee and R. G. Davis:Met. Trans., 1970, vol. 1, p. 2927.
W. F. Brown and J. E. Srawley:Plane Strain Crack Toughness Testing of High Strength Materials, ASTM STP 410, Philadelphia, 1967.
W. S. Owen, E. A. Wilson, and T. Bell:High Strength Materials, V. F. Zackay, ed., John Wiley and Sons, Inc., NY, 1965.
G. Thomas and S. K. Das:J. Iron Steel Inst., 1971, vol. 209, p. 801.
G. R. Speich:Trans. TMS-AIME, 1969, vol. 245, p. 2553.
C. Zener:Trans. Am. Inst. Min. Eng. 1946, vol. 167, p. 550.
M. Oka and C. M. Wayman:Trans. ASM, 1969, vol. 62, p. 370.
G. Thomas:Iron Steel Int., 1973, vol. 46, p. 451.
R. H. Richman:Trans. TMS-AIME, 1963, vol. 227, p. 159.
B. V. N. Rao and G. Thomas: unpublished research, 1978.
G. Thomas: Battelle Colloquim on Fundamental Aspects of Structural Alloy Design, R. I. Jaffee and B. A. Wilcox, eds., Plenum Pub. Co., 1977.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Raghavan, M., Thomas, G. Effects of substructure on the mechanical properties of Fe-Ni-Co-C alloys. Metall Trans A 10, 1665–1673 (1979). https://doi.org/10.1007/BF02811699
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02811699