Abstract
A study has been made of the effect of dispersed aluminum oxide in various concentrations on the grain size of nickel in the preparation of Ni-Al2O3 alloys and also of the connection between the resistance of the materials to compression and their initial structure. It is shown that the increase in the flow stresses of these alloys as compared with pure nickel is due to the fact that the oxides increase the resistance to movement of the dislocations within the grains, reduce their size, and also change the condition of the grain boundaries.
Similar content being viewed by others
References
M. Gensamer, Trans. ASM,36, 30, 1946.
F. V. Lenel, A. B. Backensto, Jr., and M. V. Rose, Trans AIME,209, 124, 1957.
E. Orowan, Symposium on Internal Stresses, Institute of Metals, 451, 1948.
D. Dew-Hughes and W. D. Robertson, Acta. Met.,8, 148, 1960.
E. Gregory and N. J. Grant, Trans AIME, 206, 247, 1954.
F. Felberbauer, E. P. Lautenschager, and I. O. Brittain, Trans. AIME, 230, no. 7, 1596, 1964.
R. B. Shaw, L. A. Shepard, C. D. Starr, and J. E. Dorn, Trans. ASM, 45, 249, 1953.
Herman Unckel, Z. Metalkunde,54, no. 9, 525, 1963.
V. P. Elyutin, V. N. Antsiferov, and E. I. Mozzhukhin, Izv. vuzov SSSR, Cherinaya metallurgiya, no. 7, 134, 1963.
B. A. Borok and G. M. Karpman, Trans. VII All-Union Scientific and Technical Conference on Powder Metallurgy, Erevan [in Russian], 190, 1964.
E. M. Savitskii and A. I. Vlasov, Tsventnye metally, no. 12, 77, 1961.
V. P. Elyutin, V. N. Antsiferov, E. I. Mozzhukhin, and A. K. Natanson, Poroshkovaya metallurgiya, no. 4, 33, 1963.
R. S. Goodrich, Jr. and G. S. Ansell, Acta Metallurg.,12, no. 10, 1097, 1964.
F. P. Bullen, N. E. Ryan, and C. B. Rogers, Philos. Mag., 10, no. 107, 903, 1964.
J. B. Mitchell, S. K. Mitra, and J. E. Dorn, Trans. Amer. Soc. Metals,56, 236, 1963.
N. J. Grant and O. Preston, Collection: Probl. Sovr. Metallurgii, no. 5, (37), 1957.
Oliver Preston and Nicholas J. Grant, Trans. AIME,221, 164–173, 1961.
I. E. White and R. D. Carnahan, Trans. AIME,230, no. 6, 1298, 1964.
V. P. Elyutin, V. N. Antsiferov, E. I. Mozzhukhin, and A. K. Natanson, Izv. vuzov SSSR, Chernaya metallurgiya, no. 5, 129, 1965.
M. von Heimendahl and G. Thomas, Trans. AIME, 230, no. 7, 1520, 1964.
W. D. Brentnall and W. Rostoker, Acta Metallurg.,13, no. 3, 187, 1965.
Ya. E. Geguzin, Macroscopic Defects in Metals [in Russian], Moscow, Metallurgizdat, 1962.
M. Yu. Bal'shin, Powder Metallurgy [in Russian], Moscow, 1948.
V. V. Grigor'eva and V. M. Sergeenkova, Trans. VII All-Union Scientific and Technical Conference on Powder Metallurgy, Erevan [in Russian], 220, 1964.
N. A. Figurovskii, Sedimentometric Analysis [in Russian], Moscow, and Leningrad, 1948.
N. I. Mikhailov, Yu. A. Abramov, and I. A. Makolkin, Poroshkovaya Metallurgiya, no. 3, 3, 1964.
L. N. Larikov, Coll. Physical Bases of the Strength and Plasticity of Metals [in Russian], Moscow, 255, 1963.
P. A. Beck, Z. Metallkunde,52, no. 1, 13, 1961.
V. V. Karavaeva and V. F. Sukhovarov, Izv. VUZ. Fizika, no. 5, 40, 1965.
A. P. Savitskii, Dissertation, Tomsk, 1965.
K. V. Savitskii, V. V. Grigor'eva, V. A. Kulikov, A. P. Savitskii, and V. M. Sergeenkova, Poroshkovaya metallurgiya, no. 1, 31, 1967.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Savitskii, K.V., Kulikov, V.A., Sergeenkova, V.A. et al. Dependence of the resistance to compression of metalloceramic nickel-aluminum oxide alloys on the grain size of the nickel matrix. Soviet Physics Journal 10, 27–33 (1967). https://doi.org/10.1007/BF00843546
Issue Date:
DOI: https://doi.org/10.1007/BF00843546