Abstract
Superconducting YBCO films were prepared by chemical deposition of aerosol generated from nitrate solutions by pneumatic and ultrasonic atomizers. Single crystalline YSZ and MgO substrates were used. Two different substrate temperatures were applied, with the chemical composition of starting solutions being adjusted accordingly. Deposited precursor films were thermally processed under two basically different conditions, i.e., either in atmospheric O2 atT≈900°C, or in\(p_{O_2 } \) atT≤600°C. The influence of these different deposition and annealing parameters onT c andJ c values, microstructure, and surface morphology is reported. By optimizing our technological procedure, a real possibility exists to prepare (by means of aerosol deposition) YBCO films withJ c values of at least 104–105 A/cm2, at processing temperatures (both deposition and annealing as well) not exceeding 600–700°C.
Similar content being viewed by others
References
M. Jergel,Supercond. Sci. Technol. 8, 67 (1995).
M. Kawai, T. Kawai, H. Masuhira, and M. Takahashi,Jpn. J. Appl. Phys. 26, L1740 (1987).
A. Gupta, G. Koren, E. A. Gies, N. R. Moore, E. J. M. O'Sullivan, and E. I. Copper,Appl. Phys. Lett. 52, 163 (1988).
H. Nobumasa, K. Shimizu, Y. Kitano, M. Tanaka, and T. Kawai,Jpn. J. Appl. Phys. 27, 1544 (1988).
J. J. Chu, R. S. Liu, J. H. Kung, and P. T. Wu,J. Appl. Phys. 64, 2523 (1988).
A. K. Saxena, S. P. S. Arya, B. Das, A. K. Singh, R. S. Tiwari, and O. N. Srivastava,Solid State Commun. 66, 1063 (1988).
R. L. Henry, E. J. Cukauskas, S. H. Quadri, P. H. Klein, and G. G. Campisi,J. Cryst. Growth 92, 348 (1988).
R. L. Henry, E. J. Cukauskas, S. B. Quadri, H. H. Singer, and G. G. Campisi,IEEE Trans. Magn. 25, 2352 (1989).
T. T. Kodas, E. M. Engler, and V. Y. Lee,Appl. Phys. Lett. 54, 1923 (1989).
S. P. S. Arya and E. Hintermann,J. Less-Common Met. 164–165, 478 (1990).
J. G. Wang and R. T. Yang,J. Appl. Phys. 67, 2160 (1990).
E. Ban, Y. Matsuoka, and H. Ogawa,J. Appl. Phys. 67, 2160 (1990).
E. J. Cukauskas, L. H. Allen, H. S. Newman, R. L. Henry, and P. K. Van Damme,J. Appl. Phys. 67, 6946 (1990).
G. B. Blanchet and C. R. Fincher, Jr.,Supercond. Sci. Technol. 4, 69 (1991).
D. K. Walia and A. K. Gupta,Supercond. Sci. Technol. 4, 650 (1991).
F. Hanic, M. Jergel, S. Chromik, and G. Plesch, Patent of former Czechoslovakia No. 274934, 26.08.1991.
F. Hanic, M. Jergel, S. Chromik, G. Plesch, and V. Strbik,Bull. Mater. Sci. 14, 485 (1991).
M. Jergel, S. Chromik, V. Strbik, V. Smatko, F. Hanic, G. Plesh, S. Buchta, and S. Valtyniova,Supercond. Sci. Technol. 5, 525 (1992).
A. Derraa, A. A. Hussain, and M. Sayer,J. Supercond. 5, 273 (1992).
A. Conde-Gallardo, C. Falcony, and A. Ortiz,J. Supercond. 7, 697 (1994).
I. V. Koroshun, V. Karyaev, V. T. Moshnyaga, G. A. Klosse, M. A. Krachun, V. M. Zakosarenko, and V. Yu. Davydov,Supercond. Sci. Technol. 3, 493 (1990).
M. Langlet, E. Senet, J. L. Deschanvres, G. Delabouglise, F. Weiss, and J. C. Joubert,Thin Solid Flims 151, 399 (1989).
M. Murakami, S. Gotoh, N. Koshizuka, S. Tanaka, T. Matsushita, S. Kambe, and K. Kitazawa,Cryogenics 30, 390 (1990).
K. Yamaguchi, M. Murakami, H. Fujimoto, N. Koshizuka, and S. Tanaka,Physica C 185–189, 2497 (1991).
C-J. Kim, K-B. Kim, I-S. Chang, D-Y. Won, H-C. Moon, and D-S. Suhr,J. Mater. Res. 8, 699 (1993).
M. Jergel, S. Chromik, S. Benacka, V. Strbik, S. K. Agarwal, A. V. Narlikar, B. R. Chakraborty, and S. M. Shivaprasad, in Proc. 5th Czechoslovak Symp. on Weak Superconductivity, S. Benacka and M. Kedro, eds. (Nova Science, New York 1990), pp. 37–41.
J. A. DeLuca, P. L. Karas, J. E. Tkaczyk, P. J. Bednarczyk, M. F. Garbauskas, C. L. Briant, and D. B. Sorensen,Physica C 205, 21 (1993).
E. D. Specht, A. Goyal, D. M. Kroeger, J. A. DeLuca, J. E. Tkaczyk, C. L. Briant, and J. A. Sutliff,Physica C 226, 76 (1994).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Conde-Gallardo, A., Jergel, M., Falcony, C. et al. Influence of deposition and annealing parameters on some properties of YBCO films prepared by spray pyrolysis. J Supercond 9, 101–111 (1996). https://doi.org/10.1007/BF00728434
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00728434