Abstract
When a collimated beam of light is reflected from an etched crystal surface or an epitaxial deposit, the pattern formed by this reflection provides information on the microscopic morphology of the reflecting surface. Using a He/Ne laser as a source of high-intensity collimated light, both SiC etched in CIF3 and cubic CdS grown epitaxially on GaP have been examined. Certain regions of the SiC were found to give rise to diffraction effects in the resulting reflectrogram. The epitaxial layer of CdS was found to show a threefold symmetry indicative of a {111} deposit and a negligible diffraction effect.
Similar content being viewed by others
References
B. Chalmers,Proc. Phys. Soc. 47 (1935) 733.
M. Yamamoto,Sci. Rep. Tohoku Univ. 29 (1941) 113.
V. Goldschmidt andF. E. Wright,Neues Jb. Mineralog. Paläontol. 17 (1903) 355.
G. A. Wolff, J. M. Wilbur Jr, andJ. C. Clark,Z. Electrochem. 61 (1957) 101.
G. A. Wolff, J. J. Frawley, andJ. R. Hietanen,J. Electrochem. Soc. 111 (1964) 22.
A. P. Vasil'ev andA. P. Vyatkin,Soviet Physics — Crystallography 8 (1963) 186.
M. Weinstein, G. A. Wolff, andB. N. Das,Appl. Phys. Lett. 6 (1965) 73.
J. G. Gualtieri andA. J. Kerecman,Rev. Sci. Instr. 34 (1963) 108.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Cocks, F.H., Das, B.N. & Wolff, G.A. Laser reflectogram method for the study of crystal surfaces and epitaxial deposits. J Mater Sci 2, 470–473 (1967). https://doi.org/10.1007/BF00562953
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00562953