The influence of roll speed on the rolling of metal plates

Abstract

A FEM simulation study was carried out to investigate the influence of the roll speed on the rolling process. Using a commercial FEM code, ABAQUS, a number of cases were studied. The angular velocity of the rigid rolls ranged from 30 to 480 revolutions per minute (r.p.m.) and the initial feeding speed of the plate was kept constant, thus causing a slipping between the plate and the roll surfaces. The results indicate that for an elastic-plastic hardening plate under the same thickness reduction, a higher rotating speed of rolls will help to reduce the roll separating force and the maximum value of the residual stress in the plate. Though this is a purely numerical simulation and more studies are required to look at the thermo-mechanical and frictional aspects, it does pose to be an inspiration for more tests to be carried out.