Abstract
Design rules for Layered Ridge Dielectric Waveguide (LRDW) are presented for the first time through simple figures and closed form equations. The Effective Dielectric Constant (EDC) method is used to develop the design rules that account for typical circuit specifications such as higher order mode suppression, dispersion, attenuation, and coupling between adjacent transmission lines. Comparisons between the design of LRDW, image guide, and millimeter-wave dielectric ridge guide are made.
Similar content being viewed by others
6. References
D. M. Pozar,Microwave Engineering, Addison-Wesley Publishing Co., New York, New York, 1990.
R. M. Knox and P.P. Toulios, “Integrated circuits for the millimeter through the optical frequency range,”Proc. Symp. Submillimeter Waves, New York, March 31–April 2, 1970, pp. 497–516.
W. V. McLevige, T. Itoh, and R. Mittra, “New waveguide structures for millimeter-wave and optical integrated circuits,”IEEE Trans. Microwave Theory Tech., Vol. MTT-23, pp. 788–794, Oct. 1975.
T. Wang and S. E. Schwarz, “Design of dielectric waveguides for millimeter-wave integrated circuits,”IEEE Trans. Microwave Theory Tech., Vol. MTT-31, pp. 128–134, Feb. 1983.
A. G. Engel, Jr. and L. P. B. Katehi, “Low-loss monolithic transmission lines for submillimeter and terahertz frequency applications,”IEEE Trans. Microwave Theory Tech., Vol. MTT-39, pp. 1847–1854, Nov. 1991.
R. J. Collier and R. D. Birch, “The bandwidth of image guide,”IEEE Trans. Microwave Theory Tech., Vol. MTT-28, pp. 932–935, Aug. 1980.
P.P. Toulios and R. M. Knox, “Image line integrated circuits for system applications at millimeter wavelengths,” Final Report: June 1973–March 1974, Contract No. DAAB07-73-C-0217, Report No. ECOM-73-0217-F.
G. Athanasoulias and N. K. Uzunoglu, “An entire-domain basis Galerkin’s method for the modeling of integrated mm-wave and optical circuits,”1995 IEEE MTT-S Int. Microwave Symp. Dig., Orlando, FL, May 16–20, 1995, pp. 471–474.
N. Dib and L. Katehi, “Characterization of sub-mm-wave dielectric waveguide directional coupler using the FDTD method,”1994 IEEE MTT-S Int. Microwave Symp. Dig., San Diego, CA, May 23–27, 1994, pp. 297–300.
G. E. Ponchak, N. I. Dib, and L. P. B. Katehi, “Design and analysis of transitions from rectangular waveguide to layered ridge dielectric waveguide,”IEEE Trans. Microwave Theory Tech., Vol. MTT-44, pp. 1032–1040, July 1996.
G. E. Ponchak and L. P. B. Katehi, “Development of leaky wave antennas for layered ridge dielectric waveguide,”1993 IEEE Antennas and Propagation Society Int. Symp. Dig., Ann Arbor, MI, pp. 580–583.
D. Marcuse, “Mode conversion caused by surface imperfections of a dielectric slab waveguide,”The Bell System Technical Journal, pp. 3187–3215, Dec. 1969.
A. A. Oliner, S.-T. Peng, T.-I. Hsu, and A. Sanchez, “Guidance and leakage properties of a class of open dielectric waveguides: part II- new physical effects,”IEEE Trans. Microwave Theory Tech., Vol. MTT-29, pp. 855–869, Sept. 1981.
K. Solbach, “The measurement of the radiation losses in dielectric image line bends and the calculation of a minimum acceptable curvature radius,”IEEE Trans. Microwave Theory Tech., Vol. MTT-27, pp. 51–53, Jan. 1979.
D. Gloge, “Weakly guiding fibers,”Applied Optics, Vol. 10, pp. 2252–2258, Oct. 1971.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ponchak, G.E., Katehi, L.P.B. Design of layered ridge dielectric waveguide for millimeter and sub-millimeter wave circuits. Int J Infrared Milli Waves 18, 369–382 (1997). https://doi.org/10.1007/BF02677926
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02677926