Abstract
Moisture transfer during the strand sintering operation was studied both experimentally and using a mathematical model. The drying of iron ore pellets was found to occur in two distinct periods: one at a constant drying rate and the other at a decreasing drying rate, whereas the drying of zinc ore pellets always occurs at a decreasing drying rate. Characteristic drying curves were determined for both materials. The moisture transfer mechanisms during the sintering process were demonstrated in detail, including the recondensation of water in the cold layers of the bed and the formation of an inert, overmoistened zone. The mathematical model presented simulates all of these phenomena and is used to calculate the variables related to moisture transfer. The model is adaptable to other processes where a hot gas passes through a moist packed bed.
Similar content being viewed by others
References
I.R. Dash and E. Rose:Ironmaking and Steelmaking, 1978, vol. 5 (1), pp. 25–31.
M.J. dimming, G.W. Barton, and R.J. Batterham: inProc. 4th Biennial Conf. Simulation Society Australia, Brisbane, 1980, pp. 108–19.
G.W. Healy:J. Met., 1981, vol. 33 (1), pp. 30–37.
I. Muchi and J. Higuchi:Trans. Iron Steel Inst. Jpn., 1972, vol. 12, pp. 54–63.
T. Tukamoto, S. Shimada, T. Taguchi, and J. Higuchi:Tetsu-to-Hagané, 1970, vol. 56 (6), pp. 661–70.
R.W. Young:Ironmaking and Steelmaking, 1977, vol. 4 (6), pp. 321–28.
S. Nigo, K. Kimura, M. Ichimiya, S. Yasumoto, K. Nakashima, and T. Kasahara:Tetsu-to-Hagané, 1982, vol. 68 (2182), pp. 118–25.
H. Toda and K. Kato:Trans. Iron Steel Inst. Jpn., 1984, vol. 24, pp. 178–86.
E. Kasai, J. Yagi, and Y. Omori: inProc. 43rd Ironmaking Conf., ISS-AIME, Warrendale, PA, 1984, pp. 241–49.
M. Yoshinaga and T. Kubo:Sumitomo Search, 1978, vol. 20 (11), pp. 1–14.
M.J. Cumming, W.J. Rankin, J.R. Siemon, J.A. Thurlby, G.J. Thornton, E.A. Kowalczyk, and RJ. Batterham: inProc. 4th Int. Symp. Agglomeration, AIME, Warrendale, PA, 1985, pp. 763–76.
J.A. Thurlby and R.J. Batterham:Trans. Inst. Min. Metall., 1980, sect. C, vol. 89, pp. C125–31.
V.I. Korotic and V.P. Puzanov:Izv. Vyssh. Uchebn. Zaved. Chern. Metall., 1984, vol. 10, pp. 28–33.
M. Wajima, Y. Hosotani, J. Shibata, H. Soma, and K. Tashiro:Tetsu-to-Hagané, 1982, vol. 68 (1719), pp. 45–53.
W.J. Rankin and P.W. Roller:Trans. Iron Steel Inst. Jpn., 1987, vol. 27, pp. 190–96.
F. Patisson, D. Ablitzer, C. Dulcy, E. Marlière, and J.M. Steiler: inProc. 5th Int. Iron Steel Congress, ISS-AIME, Warrendale, PA, 1986, vol. 6, pp. 511–14.
F. Patisson and D. Ablitzer: inProc. Reinhardt Schuhmann Int. Symp., D.R. Gaskell, J.P. Hager, J.E. Hoffmann, and P.J. Mackey, eds., TMS-AIME, Warrendale, PA, 1986, pp. 451–67.
J.P. Bellot, F. Patisson, and D. Ablitzer: inProc. 1er Congrès National de Génie des Procédés, Lavoisier Abonnements, Paris, 1987, vol. 3, pp. 53–58.
F. Kneule:Das Trocknen, translation Eyrolles, Paris, 1962, p. 132.
S. Ergun:Chem. Eng. Prog., 1952, vol. 48 (2), pp. 87–94.
R.B. Keey:Introduction to Industrial Drying Operations, Pergamon Press, Oxford, 1978, p. 362.
O. Krischer:Die wissenschaftlichen Grundlagen der Trocknungstechnik, Springer-Verlag, Berlin, 1963, p. 436.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Patisson, F., Bellot, J.P. & Ablitzer, D. Study of moisture transfer during the strand sintering process. Metall Trans B 21, 37–47 (1990). https://doi.org/10.1007/BF02658114
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02658114