Abstract
An experimental investigation, described in Part I and bearing on aluminum alloy billets produced by the CREM process, has shown that the main characteristics of this new technology are the elimination of the need for grain-refiner master alloys and a marked reduction of the scalping operation. Part II reports on the examination of the problems specific to the CREM process, which occur particularly during slab casting. The three-dimensional (3-D) aspect of the electromagnetic and fluid flow phenomena, the effect of the electrical conductivity of the ingot mold, and the improvement of the process design are examined.
Similar content being viewed by others
References
Ch. Vivès:Metall. Trans. B, 1989, vol. 20B, pp. 623–29.
Ch. Vivès and J.P. Riquet: U.S. Patent No. 24 694, issued March 1987.
Ch. Vives and R. Ricou:Metall. Trans. B, 1985, vol. 16B, pp. 377–84.
Ch. Vivès and R. Ricou:Light Metals, 1986, pp. 873-82.
J. Lavers:IEEE Trans. Ind. App., 1981, vol. 1 A-17 (4), pp. 427–32.
J. Szekely and F. Foreman:J. Metals, 1986, vol. 38 (10), pp. 54–57.
K.-H. Spitzer, M. Dubke, and K. Schwerdtfeger:Metall. Trans. B, 1986, vol. 17B, pp. 119–31.
J.L. Meyer, J. Szekely, N. El-Kaddah, Ch. Vivès, and R. Ricou:Metall. Trans. B, 1987, vol. 18B, pp. 539–47.
J.W. Evans and J. Sakane:Light Metals, 1988, pp. 539-43.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Vives, C. Electromagnetic refining of aluminum alloys by the CREM process: Part II. Specific practical problems and their solutions. Metall Trans B 20, 631–643 (1989). https://doi.org/10.1007/BF02655920
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02655920