Abstract
This paper presents an overview of experimental and analytical approaches that have been used to characterize damping properties of composite materials and structures, with emphasis on polymer composites. A discussion of damping mechanisms operating in composites is followed by a review of several experimental methods for measuring damping. A summary of analytical models for predicting damping at both the micromechanical and macromechanical levels is presented and comments on ways of improving and optimizing damping in composites are offered.
Similar content being viewed by others
References
R.P. Gibson,Shock and Vibration Digest, 19(7), 13–22(1987).
C.W. Bert, inDamping Applications for Vibration Control, P.J. Torvik, Ed., AMD vol 38, ASME, 53-63 (1980).
S.K. Chaturvedi, inEncyclopedia of Composites, S. Lee, Ed., VCH Publishing Co., New York (1989).
R. Plunkett, inProc. IUTAM Conf. Adv. Composite Mater., Pergamon Press, 93–104(1983).
“Standard Practice for Determining and Reporting Dynamic Mechanical Properties of Plastics,” ASTM Standard D4065, ASTM (1982).
“Standard Method for Measuring Vibration Damping Properties of Materials,” ASTM Standard E756, ASTM (1983).
R.F. Gibson, in “1983 Advances in Aerospace Structures, Materials and Dynamics,” ASME AD-06,89-95 (1983).
R.M. Christensen,Mechanics of Composite Materials, John Wiley & Sons, New York (1979).
R.M. Jones,Mechanics of Composite Materials, Hemisphere Publishing Co. (1975).
Z. Hashin,Int. J. Solids Struct., 6, 539–552 (1970).
Z. Hashin,Int. J. Solids Struct., 6, 797–807 (1970).
A.D. Nashif, D.I.G. Jones, and J.P. Henderson,Vibration Damping, John Wiley & Sons, New York (1985).
R.P. Gibson and R. Plunkett,Exp. Mechan., 11(8), 297–302 (1977).
W.E. Baker, W.E. Woolam, and D. Young,Int. J. Mech. Eng. Sci., 9,743–766(1967).
N. Granick and J.E. Stern, “Material Damping of Aluminum by a Resonant Dwell Technique,” NASA TN D2893 (1965).
S.A. Suarez, R.F. Gibson, and L.R. Deobald,Exp. Tech., 8(10), 19–24(1984).
R.P. Gibson, A. Yau, and D.A. Riegner, in “Short Fiber Reinforced Composite Materials,” ASTM STP 772, ASTM, 133–150 (1982).
J.D. Rogers and K.G. McConnell,Int. J. Anal. Exp. Modal Anal., 8–17(1986).
J.M. Lee and K.G. McConnell,Exp. Mechan., 15(9), 221–225 (1975).
S.P. Timoshenko, D.H. Young, and W. Weaver,Vibration Prob- lems in Engineering, John Wiley & Sons, New York (1974).
T.C. Huang and C.C. Huang,J. Appl. Mechan., Series E,38(2), 515–521 (1971).
T. Nakao, T. Okano, and I. Asano,J. Appl. Mechan., 52(3), 728–731 (1985).
T.J. Dudek,J. Composite Mata., 4, 232–241 (1970).
S. Kalyanasundaram, D.H. Allen, and R.A. Schapery, “Proc. 28th AIAA/ASME/ASCE/AHS Structures, Struct. Dynamics and Mater. Conf.,” Monterey, Paper No. AIAA-87-0890-CP (Apr 1987).
W.T. Thomson,Theory of Vibration with Applications, Prentice-Hall, Englewood Cliffs, NJ (1972).
J. Soovere and M.L. Drake, “Aerospace Structures Technology Damping Design Guide: Technology Review,” Vol 1, AFWAL-TR-84-3089, Wright Patterson AFB, OH (1985).
E.P. Crawley and D.G. Mohr,AIAA J., 25(1), 125–131 (1985).
R.P. Gibson, in “Proc. 3rd Large Space Systems Tech. Rev.,” NASA Conf. Publ. 2215, Part 1,123–132(1982).
A.K. Ray, V. Kinra, S. Rawal, and M. Misra, inRole of Interfaces in Material Damping, 95–102, ASM International (1985).
R.P. Gibson, A. Yau, and D.A. Riegner,Exp. Tech., 6, 10–14 (1982).
R.D. Adams and J. Bacon,J. Comp. Mater., 7, 53–67 (1973).
S.A. Suarez and R.F. Gibson,J. Test. Eval., 15(2), 114–121 (1987).
P.R. Mantena, R.F. Gibson, and T.A. Place, “Proc. 6th ASM/ESD Adv. Composites Conf.,” ASM International (1990).
R.F. Gibson, S.K. Chaturvedi, and C.T. Sun,J. Mater. Sci., 17, 3499–3509(1982).
S.A. Suarez, R.F. Gibson, C.T. Sun, and S.K. Chaturvedi,Exp. Mechan.,20,175–184(1986).
C.T. Sun, J.K. Wu, and R.F. Gibson,J. Reinforced Pias. Comp., 4, 262–272(1985).
C.T. Sun, J.K. Wu, and R.F. Gibson,J. Maier.Sci.,22, 1006–1012 (1987).
E.E. Ungar and E.M. Kerwin,J. Acoust. Soc. Am., 34(7), 954–958 (1962).
C.D. Johnson and D.A. Kienholz,AIAA J., 20(9), 954–957 (1982).
S.J. Hwang and R.F. Gibson,J. Eng. Mater. Technol., 109, 47–52 (1987).
S.J. Hwang and R.F. Gibson, in “Proc. 34th Int. SAMPE Symposium,” Reno(1989).
S.J. Hwang and R.F. Gibson, in “Proc. Am. Soc. Composites 5th Tech. Conf. Comp. Mater.” (1990).
R.G. Ni and R.D. Adams,J. Comp. Mater., 18, 104–121 (1984).
P.R. Mantena, R.F. Gibson, and S.J. Hwang, in “Proc. Damping 89 Conf.,” WRDC-TR-89-3116, Paper No. IAB, Wright Patterson AFB, OH (1989).
D.X. Liao, C.K. Sung, and B.S. Thompson,J. Comp. Mater., 20(5), 485–501 (1986).
C.K. Sung, B.S. Thompson, M.K. Gandhi, and C.Y. Lee,Int. J. Mech.Sci., 29(l987).
P. Hajela and C.J. Shih,Computers Struct., 52(1), 213–222 (1989).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Gibson, R.F. Damping characteristics of composite materials and structures. JMEP 1, 11–20 (1992). https://doi.org/10.1007/BF02650027
Issue Date:
DOI: https://doi.org/10.1007/BF02650027