Skip to main content
Log in

Ermittlung von Spannungsintensitätsfaktoren aus spannungsoptisch bestimmten Kerbfaktor- und Kerbspannungsdiagrammen

  • Published:
Forschung im Ingenieurwesen A Aims and scope Submit manuscript

Zusammenfassung

Ausgehend von den Creagerschen Beziehungen für die Spannungsverteilung in der unmittelbaren Umgebung von schmalen Kerben und der Kerbfaktordarstellung nach Ficker und Jecić werden die in der Literatur bekannten Zusammenhänge zwischen Rissen und Kerben erweitert und Verfahren für die Ermittlung von Spannungsintensitätsfaktoren aus Kerbfaktor- und Kerbspannungsdiagrammen entwickelt. Diese für die Belastungsarten I, II und die gemischte Belastungsart geltenden Verfahren gehen insbesondere davon aus, daß in Kerbfaktor- und Kerbspannungsdiagrammen die Kurven für schmale Kerben unter bestimmten Voraussetzungen linear verlaufen und deren Steigungen dem Spannungsintensitätsfaktor für den entsprechenden Rißfall proportional sind. Die Verfahren werden anhand von Beispielen getestet, wobei die Kerbfaktoren bzw. Kerbspannungen spannungsoptisch ermittelt werden. Die Ergebnisse für die Spannungsintensitätsfaktoren sind insbesondere bei Belastungsart I sehr genau.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Schrifttum

  1. Hahn, H. G.: Spannungsverteilung an Rissen in festen Körpern. VDI-Forschungsheft 542, Düsseldorf: VDI-Verlag 1970.

    Google Scholar 

  2. Hahn, H. G.: Mechanik der Brucherscheinungen in festen Körpern. Z. Werkstofftechn. Bd. 2 (1971) Nr. 1, S. 28/34.

    Google Scholar 

  3. Hahn, H. G.: Die linear-elastische Bruchmechanik. VDI-Z. Bd. 113 (1971) Nr. 1, S. 43/47.

    Google Scholar 

  4. Hahn, H. G.: Bruchmechanik. Stuttgart: Teubner-Verlag 1976.

    MATH  Google Scholar 

  5. Paris, P. C., u.G. C. Sih: Stress analysis of cracks. ASTM STP Nr. 381 (1965) S. 30/81.

    Google Scholar 

  6. Sih, G. C.: Mechanics of fracture. Vol. 1: Methods of analysis and solutions of crack problems. Leyden: Noordhoff International Publ. 1973.

    MATH  Google Scholar 

  7. Kobayashi, A. S.: Experimental techniques in fracture mechanics. SESA Monograph Nr. 1 u. Nr. 2, Westport 1973 bzw. 1975.

  8. Post, D.: Photoelastic stress analysis for an edge crack in a tensile field. Proc. SESA Bd. 12 (1954) Nr. 1, S. 99/116.

    MathSciNet  Google Scholar 

  9. Wells, A. A., u.D. Post: The dynamic stress distribution surrounding a running crack—a photoelastic analysis. Proc. SESA Bd. 16 (1958) Nr. 1, S. 69/92 u. S. 96.

    Google Scholar 

  10. Irwin, G. R.: Discussion. Proc. SESA Bd. 16 (1958) Nr. 1, S. 93/96.

    Google Scholar 

  11. Marloff, R. H., M. M. Leven, T. N. Ringler u.R. L. Johnson: Photoelastic determination of stress intensity factors. Exp. Mech. Bd. 11 (1971) Nr. 12, S. 529/39.

    Google Scholar 

  12. Kobayashi, A. S.: Photoelastic studies of fracture. In:Liebowitz, H.: Fracture. Band III, S. 311/69, New York: Academic Press 1971.

    Google Scholar 

  13. Bradley, W. B., u.A. S. Kobayashi: An investigation of propagating cracks by dynamic photoelasticity. Exp. Mech. Bd. 10 (1970) Nr. 3, S. 106/13.

    Google Scholar 

  14. Kobayashi, A. S., B. G. Wade, W. B. Bradley u.S. T. Chiu: Crack branching in Homalite-100 sheets. Engng. Fract. Mech. Bd. 6 (1974) Nr. 1, S. 81/92.

    Google Scholar 

  15. Smith, D. G., u.C. W. Smith: Photoelastic determination of mixed mode stress intensity factors. Engng. Fract. Mech. Bd. 4 (1972) Nr. 2, S. 357/66.

    Google Scholar 

  16. Schroedl, M. A., J. J. McGowan u.C. W. Smith: Use of a Taylor series correction method in photoelastic stress intensity determination. VPI-E-73-34, Virginia Polytechnic Institute and State University, 1973.

  17. Smith, C. W.: Use of three-dimensional photoelasticity in fracture mechanics. Exp. Mech. Bd. 13 (1973) Nr. 12, S. 539/42.

    Google Scholar 

  18. Schroedl, M. A., J. J. McGowan u.C. W. Smith: Determination of stress-intensity factors from photoelastic data with applications to surface-flaw problems. Exp. Mech. Bd. 14 (1974) Nr. 10, S. 392/99.

    Google Scholar 

  19. Smith, C. W.: Use of three-dimensional photoelasticity and progress in related areas. In: [7] SESA Monograph Nr. 2, S. 3/58.

  20. Klein, G.: Bestimmung von Spannungsintensitätsfaktoren bei gemischten Beanspruchungsarten am Beispiel eines Risses in der Umgebung eines Kreisloches. Diss. TH Karlsruhe 1974.

  21. Theocaris, P. S., u.E. E. Gdoutos: A photoelastic determination ofK 1 stress intensity factors. Engng. Fract. Mech. Bd. 7 (1975) Nr. 2, S. 331/39.

    Google Scholar 

  22. Gdoutos, E. E., u.P. S. Theocaris: A photoelastic determination of mixed-mode stress intensity factors. Exp. Mech. Bd. 18 (1978) Nr. 3, S. 87/96.

    Google Scholar 

  23. Etheridge, J. M., u.J. W. Dally: A critical review of methods for determining stress-intensity factors from isochromatic fringes. Exp. Mech. Bd. 17 (1977) Nr. 7, S. 248/54.

    Google Scholar 

  24. Etheridge, J. M., J. W. Dally u.T. Kobayashi: A new method of determining the stress intensity factorK from isochromatic fringe loops. Engng. Fract. Mech. Bd. 10 (1978) Nr. 1, S. 81/93.

    Google Scholar 

  25. Etheridge, J. M. u.J. W. Dally: A three-parameter method for determining stress intensity factors from isochromatic fringe loops. J. Strain Anal. Bd. 13 (1978) Nr. 2, S. 91/94.

    Google Scholar 

  26. Kobayashi, T., J. W. Dally u.W. L. Fourney: Influence of specimen geometry on crack propagation and arrest behaviour. VDI-Berichte 313 (1978) S. 63/69.

    Google Scholar 

  27. Kuske, A., u.A. Schlonski: Spannungsoptische Modellverfahren zur Beurteilung dynamischer Rißausbreitung. Z. Werkstofftechn. Bd. 8 (1977) Nr. 2, S. 64/67.

    Google Scholar 

  28. Klein, G., u.L. Hodulak: Zur Wechselwirkung von Mehrfachrissen. Z. Werkstofftechn. Bd. 9 (1978) Nr. 3, S. 86/92.

    Google Scholar 

  29. Smith, C. W., u.W. H. Peters: Prediction of flaw shapes and stress intensity distributions in 30 problems by the frozen stress method. VDI-Berichte Nr. 313 (1978) S. 861/64.

    Google Scholar 

  30. Schroedl, M.A., J. J. McGowan u.C. W. Smith: An assessment of factors influencing data obtained by the photoelastic stress freezing technique for stress fields near crack tips. Engng. Fract. Mech. Bd. 4 (1972) Nr. 4, S. 801/09.

    Google Scholar 

  31. Smith, C. W., J. J. McGowan u.M. Jolles. Effects of artificial cracks and Poisson's ratio upon photoelastic stress-in-tensity determination. Exp. Mech. Bd. 16 (1976) Nr. 5, S. 188/93.

    Google Scholar 

  32. Pook, L. P., u.J. R. Dixon: Analysis of single-edge-notch tension specimens. Iron and Steel Institute, London, Publ. No. 120 (1970) S. 45/50.

    Google Scholar 

  33. Wilson, W. K. Comparison of the stress distributions on the plane of symmetry of the WOL-test-specimen obtained by various methods and an interpretation of the results of a photoelastic study of the specimen. Research Report 66-1D7-MEMTL-R2, Westinghouse Research Laboratories, Pittsburgh (Pa.) 1966.

    Google Scholar 

  34. Irwin, G. R.: Fracture In:S. Flügge: Handbuch der Physik, Band 6, S. 551/90, Berlin: Springer-Verlag 1958.

    Google Scholar 

  35. Neuber, H.: Kerbspannungslehre. Berlin: Springer-Verlag 1958.

    MATH  Google Scholar 

  36. Creager, M.: The elastic stress field near the tip of a blunt crack. Master's Thesis, Lehigh University, Bethlehem (Pa.) 1966.

    Google Scholar 

  37. Creager, M., u.P. C. Paris: Elastic fields equations for blunt cracks with reference to stress corrosion cracking. Int. J. Fract. Mech. Bd. 3 (1967) Nr. 3, S. 247/52.

    Google Scholar 

  38. Ficker, E., u.S. Jecić: Beitrag zur Darstellung von Formzahlen. VDI-Berichte Nr. 271 (1976) S. 47/51.

    Google Scholar 

  39. Richard, H. A.: Ermittlung von Spannungsintensitätsfaktoren aus spannungsoptisch bestimmten Kerbspannungen. Unveröffentlichter Jahresbericht 8606/5 am Lehrstuhl für Technische Mechanik der Univ. Kaiserslautern, 1977.

  40. Wagner, R.: Lebensdauervorhersage schwingend beanspruchter scharf gekerbter Bauteile auf der Grundlage der Bruchmechanik. Diss. TU München. 1973.

  41. Bart, J., H. Neuber u.E. Schnack: Kerbfaktordiagramme nach numerischen Berechnungsverfahren. Konstruktion Bd. 28 (1976) Nr. 6, S. 217/18.

    Google Scholar 

  42. Peterson, R. E.: Stress concentration factors. New York: John Wiley & Sons 1974.

    Google Scholar 

  43. Richard, H. A.: Ermittlung von Spannungsintensitätsfaktoren aus spannungsoptisch bestimmten Kerbspannungen. Diss. Univ. Kaiserslautern 1979.

  44. Crostack, H. A.: Untersuchungen zur Schallemission von Rißbildung und-ausbreitung in Punktschweißverbindungen unter Last. Z. Werkstofftechn. Bd. 8 (1977) Nr. 6, S. 191/204.

    Google Scholar 

  45. Richard, H. A.: Interpolationsformel für Spannungsintensitätsfaktoren. VDI-Z. (erscheint demnächst).

  46. Wolf, H.: Spannungsoptik. Berlin: Springer-Verlag 1976.

    Google Scholar 

  47. Föppl, L., u.E. Mönch: Praktische Spannungsoptik. Berlin: Springer-Verlag 1972.

    Google Scholar 

  48. Tada, H., P. C. Paris u.G. R. Irwin: The stress analysis of cracks handbook. Hellertown: Del Research Corporation 1973.

  49. Wilson, W. K.: Numerical method for determining stress intensity factors for an interior crack in a finite plate. J. Basic Engng. Bd. 93 (1971) Nr. 4, S. 685/90.

    Google Scholar 

Download references

Authors

Additional information

Dr.-Ing.H. A. Richard ist wissenschaftlicher Mitarbeiter am Lehr-stuhl für Technische Mechanik (Leitung: o. Prof. Dr. rer. nat.H. G. Hahn) der Universität Kaiserslautern.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Richard, H.A. Ermittlung von Spannungsintensitätsfaktoren aus spannungsoptisch bestimmten Kerbfaktor- und Kerbspannungsdiagrammen. Forsch Ing-Wes 45, 188–199 (1979). https://doi.org/10.1007/BF02573861

Download citation

  • Received:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02573861

Navigation