Abstract
At the Integrated Manufacturing Technologies Institute (IMTI), National Research Council Canada, research in laser material processing has been underway for more than a decade. Topics being investigated include the development of laser welding, cutting, and drilling applications, surface modification techniques, laser depth controlled machining, stereolithography (SLA), and selective laser sintering (SLS). This paper reviews the activities in laser surface modification and laser depth controlled machining of ceramics.
Similar content being viewed by others
References
Anderson, S.G.: Review and forecast of laser markets, 1995. Laser Focus World, 54–70, 1995.
Sandig, S. and Weisner, P.: Laser surface melting of cutting tool material. ICALEO, pp. 835–846, 1993.
Draper, C.W. and Poate, J.M.: Laser surface alloying. International Metals Reviews, 30(2):85, 1985.
Laser Surface Treatment of Metals, C.W. Draper and P. Mazzoldi (eds.), Martinus Nijhoff Publishers; 1986.
Coatings for high temperature applications, E. Lang (ed.), Essex: Applied Science Publishers, 1983.
High temperature protective coatings. Conf Proc. AIME meeting, S.C. Singhal (ed.), Atlanta, 1983.
Fundamental Aspects of Corrosion Protection by Surface Modification, E. McCafferty, C.R. Clayton, and J. Oudar (eds.) Pub. No. 84-3, Electro Chemical Society, 1984.
Surface modification technologies II (T.S. Sudarshan and D.G. Bhatt (eds.)) TMS Publication; 1988.
Surface Modification Technologies III Sudarshan, T.S. and Bhatt, D.G. (eds.) TMS Publication, 1989.
Poate, J.M., Foti, G., and Jacobson, D.C.: Surface modification and alloying by Laser. Ion and Electron Beams, Plenum Press, 1984.
Lasers in Material Processing, A. Gomersall (ed.), IFS publications, 1986.
ICALEO'93 Proceedings, vol. 77, 1993.
Burakov, V.A., Varavka, V.N., and Burakova, N.M.: Izv. VUZ Mashinostr., 10:113, 1985.
Cermak, J., Gardavska, G., Kraus, A., Kafudakis, A., and Zarubova, N.: High purity materials in science and technology. Proc. 6th. Int. Sym., Dresdon, p. 198, May 1985.
Islam, M.U. and Wells, W.J.: Laser surface hardening of steels NRC Canada Report No. 24152, 1984.
Bande, H., L'Esperance, G., Islam, M.U., and Koul, A.K.: Laser surface hardening of AISI O1 tool steel and its microstructure. Materials Science and Technology, 7:452–458, 1991.
Islam, M.U. and Wells, W.J.: Laser surface hardening of a mining grade steel. NRC Technical Report No. CTR-MTC-001, 1984.
Hindam, H. and Islam, M.U.: Influence of laser surface modification on the high temperature oxidation behaviour of commercial Fe-based alloys Surface Modification Technologies II., Proc. of 2nd Int. Conf. on Surface Modification Technoiogies, TMS Fall Meeting, pp. 91–106, September 1988.
Islam, M.U. and Hindam, H.: Electron and laser beam alloying of steels. Materials and Manufacturing Processes, 5(1):93–108, 1990.
Xue, L.: Surface modification. treatments to improve the fretting fatigue resistance of Ti-6Al-4V Ph.D. Thesis, Carleton University, Ottawa, Ontario, Canada, 1994.
Xue, L., Islam, M.U., and Koul, A.K.: Laser nitriding of Ti-6A1-4V. Advanced Performance Materials, to be published.
Xue, L., Koul, A.K., Bibby, M., Wallace, W., and Islam, M.U.: A survey of surface treatments to improve the fretting fatigue resistance of Ti-6A1-4V Proceedings of the Second International Conference on Surface Treatment, Milan, Italy, June 1995.
Xue, L., Koul, A.K., Bibby, M., Andrews, B., and Islam, M.U.: The effect of residual stress and fretting bridge geometry on the fretting fatigue behavior of surface modified Ti-6A1–4V". Canadian Aeronautics and Space Journal, 41(2):78–85, 1995.
Berriche, R., Xue, L., Islam, M.U., and Koul, A.K.: Surface Microhardness of laser nitrided Ti-6A1-4V. NRC Report-LTR-ST 1957, January 1994.
Islam, M.U. and Campbell, G.R.: Laser machining of ceramics—A review. Materials and Manufacturing Processes, 8(6):611–630, 1993.
Islam, M.U., McGregor, G., and Campbell, G.R.: Laser rough and finish machining of hard materials, US Patent Number 5,138,130, 1992. Canadian Patent Number 2,009,514, 1995.
Campbell, G.R. and Islam M.U.: Laser machining of silicon nitride base materials. Materials and Manufacturing Processes, 10(3):509–518, 1995.
Nikumb, S., Islam, M.U., and Campbell, G.R.: Precision material removal of structural ceramics and steels using Nd:YAG lasers. Proceedings of the ICALEO '93, Orlando, Florida, pp. 51–58, 1993.
Author information
Authors and Affiliations
About this article
Cite this article
Islam, M. An overview of research in the fields of laser surface modification and laser machining at the Integrated Manufacturing Technologies Institute, NRC. Adv Perform Mater 3, 215–238 (1996). https://doi.org/10.1007/BF00136747
Issue Date:
DOI: https://doi.org/10.1007/BF00136747