Abstract
Carbon materials are fundamental for the manufacturing of fuel cells. Several fuel cell components are made entirely of carbon in a graphitic form. In the present chapter, an overview of the different fuel cell carbon components and the materials used in their preparation will be presented. Novel approaches in the synthetic method, in order to impart desired properties, and in the manufacturing of the components will be shown. Also, relevant results on the latest research conducted will be discussed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Litster S, McLean G (2004) PEM fuel cell electrodes. J Power Sources 130:61–76
Mehta V, Cooper JS (2003) Review and analysis of PEM fuel cell design and manufacturing. J Power Sources 114:32–53
Zhang J (2008) PEM fuel cell electrocatalysts and catalyst layers: fundamentals and applications. Springer, New York
Chen E (2003) Thermodynamics and electrochemical kinetics. In: Hooger G (ed) Fuel cell technology handbook. CRC Press, New York
DOE Hydrogen and Fuel Cells Program. 2009 Annual Progress Report (2009) No DOE/GO-102009-2950. U.S. Department of Energy, Washington, DC
Marcinkoski J, James BD, Kalinoski JA, Podolski W, Benjamin T, Kopasz J (2011) Manufacturing process assumptions used in fuel cell system cost analyses. J Power Sources 196:5282–5292
Baker AA (1975) Carbon fibre reinforced metals – a review of the current technology. Mater Sci Eng 17:177–208
Dhakate S, Mathur R, Kakati B, Dhami T (2007) Properties of graphite-composite bipolar plate prepared by compression molding technique for PEM fuel cell. Int J Hydrogen Energy 32:4537–4543
Kamarudin SK, Daud WRW, Som AM, Takriff MS, Mohammad AW (2006) Technical design and economic evaluation of a PEM fuel cell system. J Power Sources 157:641–649
Bar-On I, Kirchain R, Roth R (2002) Technical cost analysis for PEM fuel cells. J Power Sources 109:71–75
Guy R, Lancaster T, Thornton J, Hart A, Sun J, Wilde J (2012) Polymer fuel cells – cost reduction and market potential. Carbon Trust, London
Sharma S, Pollet BG (2012) Support materials for PEMFC and DMFC electrocatalysts – a review. J Power Sources 208:96–119
Soboleva T, Zhao X, Malek K, Xie Z, Navessin T, Holdcroft S (2010) On the micro-, meso-, and macroporous structures of polymer electrolyte membrane fuel cell catalyst layers. ACS Appl Mater Interfaces 2:375–384
Kinoshita K (1988) Carbon: electrochemical and physicochemical properties. Wiley, New Jersey
Rodríguez-Reinoso F (1998) The role of carbon materials in heterogeneous catalysis. Carbon 36:159–175
Antolini E (2009) Carbon supports for low-temperature fuel cell catalysts. Appl Catal, B 88:1–24
Figueiredo JL, Pereira MFR, Freitas MMA, Órfão JJM (2006) Characterization of active sites on carbon catalysts. Ind Eng Chem Res 46:4110–4115
Calvillo L, Gangeri M, Perathoner S, Centi G, Moliner R, Lázaro MJ (2011) Synthesis and performance of platinum supported on ordered mesoporous carbons as catalyst for PEM fuel cells: effect of the surface chemistry of the support. Int J Hydrogen Energy 36:9805–9814
Uchida M, Aoyama Y, Tanabe M, Yanagihara N, Eda N, Ohta A (1995) Influences of both carbon supports and heat-treatment of supported catalyst on electrochemical oxidation of methanol. J Electrochem Soc 142:2572–2576
Liu H, Song C, Zhang L, Zhang J, Wang H, Wilkinson DP (2006) A review of anode catalysis in the direct methanol fuel cell. J Power Sources 155:95–110
Takasu Y, Kawaguchi T, Sugimoto W, Murakami Y (2003) Effects of the surface area of carbon support on the characteristics of highly-dispersed PtRu particles as catalysts for methanol oxidation. Electrochim Acta 48:3861–3868
Watanabe M, Sei H, Stonehart P (1989) The influence of platinum crystallite size on the electroreduction of oxygen. J Electroanal Chem Interf Electrochem 261:375–387
Rao V, Simonov PA, Savinova ER, Plaksin GV, Cherepanova SV, Kryukova GN, Stimming U (2005) The influence of carbon support porosity on the activity of PtRu/Sibunit anode catalysts for methanol oxidation. J Power Sources 145:178–187
Aricò AS, Srinivasan S, Antonucci V (2001) DMFCs: from fundamental aspects to technology development. Fuel Cells 1:133–161
Uchida M, Fukuoka Y, Sugawara Y, Ohara H, Ohta A (1998) Improved preparation process of very-low-platinum-loading electrodes for polymer electrolyte fuel cells. J Electrochem Soc 145:3708–3713
Uchida M, Fukuoka Y, Sugawara Y, Eda N, Ohta A (1996) Effects of microstructure of carbon support in the catalyst layer on the performance of polymer-electrolyte fuel cells. J Electrochem Soc 143:2245–2252
Hughes TV, Chambers CR (1889) Manufacture of carbon filaments. US Patent 405,480, 18 June 1889
Iijima S (1991) Helical microtubules of graphitic carbon. Nature 354:56–58
Serp P, Corrias M, Kalck P (2003) Carbon nanotubes and nanofibers in catalysis. Appl Catal A 253:337–358
Drillet J-F, Bueb H, Dittmeyer R, Dettlaff-Weglikowska U, Roth S (2009) Efficient SWCNT-based anode for DMFC applications. J Electrochem Soc 156:F137–F144
Jeng K-T, Chien C-C, Hsu N-Y, Yen S-C, Chiou S-D, Lin S-H, Huang W-M (2006) Performance of direct methanol fuel cell using carbon nanotube-supported Pt–Ru anode catalyst with controlled composition. J Power Sources 160:97–104
Prabhuram J, Zhao TS, Tang ZK, Chen R, Liang ZX (2006) Multiwalled carbon nanotube supported PtRu for the anode of direct methanol fuel cells. J Phys Chem B 110:5245–5252
Tsuji M, Kubokawa M, Yano R, Miyamae N, Tsuji T, Jun M-S, Hong S, Lim S, Yoon S-H, Mochida I (2006) Fast preparation of PtRu catalysts supported on carbon nanofibers by the microwave-polyol method and their application to fuel cells. Langmuir 23:387–390
Joo SH, Pak C, You DJ, Lee S-A, Lee HI, Kim JM, Chang H, Seung D (2006) Ordered mesoporous carbons (OMC) as supports of electrocatalysts for direct methanol fuel cells (DMFC): effect of carbon precursors of OMC on DMFC performances. Electrochim Acta 52:1618–1626
Chang H, Joo SH, Pak C (2007) Synthesis and characterization of mesoporous carbon for fuel cell applications. J Mater Chem 17:3078–3088
Pekala RW (1989) Low density, resorcinol-formaldehyde aerogels. US Patent 4,873,218, 10 Oct 1989
Yamamoto T, Mukai SR, Endo A, Nakaiwa M, Tamon H (2003) Interpretation of structure formation during the sol-gel transition of a resorcinol-formaldehyde solution by population balance. J Colloid Interf Sci 264:532–537
Aegerter MA, Leventis N, Koebel MM (2011) Aerogels handbook. Springer, New York
Job N, Théry A, Pirard R, Marien J, Kocon L, Rouzaud J-N, Béguin F, Pirard J-P (2005) Carbon aerogels, cryogels and xerogels: influence of the drying method on the textural properties of porous carbon materials. Carbon 43:2481–2494
Takashi K (2000) Control of pore structure in carbon. Carbon 38:269–286
Lu AH, Spliethoff B, Schüth F (2008) Aqueous synthesis of ordered mesoporous carbon via self-assembly catalyzed by amino acid. Chem Mater 20:5314–5319
Zhang F, Meng Y, Gu D, Yan Y, Yu C, Tu B, Zhao D (2005) A facile aqueous route to synthesize highly ordered mesoporous polymers and carbon frameworks with Ia3d bicontinuous cubic structure. J Am Chem Soc 127:13508–13509
Al-Muhtaseb SA, Ritter JA (2003) Preparation and properties of resorcinol–formaldehyde organic and carbon gels. Adv Mater 15:101–114
Du H, Li B, Kang F, Fu R, Zeng Y (2007) Carbon aerogel supported Pt–Ru catalysts for using as the anode of direct methanol fuel cells. Carbon 45:429–435
Calderón JC, Mahata N, Pereira MFR, Figueiredo JL, Fernandes VR, Rangel CM, Calvillo L, Lázaro MJ, Pastor E (2012) Pt-Ru catalysts supported on carbon xerogels for PEM fuel cells. Int J Hydrogen Energy 37:7200–7211
Mahata N, Silva AR, Pereira MFR, Freire C, de Castro B, Figueiredo JL (2007) Anchoring of a [Mn(salen)Cl] complex onto mesoporous carbon xerogels. J Colloid Interf Sci 311:152–158
Arbizzani C, Beninati S, Soavi F, Varzi A, Mastragostino M (2008) Supported PtRu on mesoporous carbons for direct methanol fuel cells. J Power Sources 185:615–620
Knox JH, Kaur B, Millward GR (1986) Structure and performance of porous graphitic carbon in liquid chromatography. J Chromatogr A 352:3–25
Ryoo R, Joo SH, Jun S (1999) Synthesis of highly ordered carbon molecular sieves via template-mediated structural transformation. J Phys Chem B 103:7743–7746
Vinu A, Mori T, Ariga K (2006) New families of mesoporous materials. Sci and Technol Adv Mat 7:753–771
Lee KT, Oh SM (2002) Novel synthesis of porous carbons with tunable pore size by surfactant-templated sol-gel process and carbonisation. Chem Commun 22:2722–2723
Lu AH, Schüth F (2006) Nanocasting: a versatile strategy for creating nanostructured porous materials. Adv Mater 18:1793–1805
Ryoo R, Joo SH, Jun S, Tsubakiyama T, Terasaki O (2001) Ordered mesoporous carbon molecular, sieves by templated synthesis: the structural varieties. In: Galarneau A, Fajula F, Renzo FD, Vedrine J (eds) Studies in surface science and catalysis. Elsevier, Amsterdam
Shin HJ, Ryoo R, Kruk M, Jaroniec M (2001) Modification of SBA-15 pore connectivity by high-temperature calcination investigated by carbon inverse replication. Chem Commun 4:349–350
Liu X, Tian B, Yu C, Gao F, Xie S, Tu B, Che R, Peng L-M, Zhao D (2002) Room-temperature synthesis in acidic media of large-pore three-dimensional bicontinuous mesoporous silica with Ia3d symmetry. Angew Chem Int Ed 41:3876–3878
Lu AH, Schmidt W, Spliethoff B, Schüth F (2003) Synthesis of ordered mesoporous carbon with bimodal pore system and high pore volume. Adv Mater 15:1602–1606
Fuertes AB (2003) Template synthesis of mesoporous carbons with a controlled particle size. J Mater Chem 13:3085–3088
Lu AH, Zhao D, Wan Y (2009) Nanocasting: a versatile strategy for creating nanostructured porous materials. Royal Society of Chemistry, London
Stein A, Wang Z, Fierke MA (2009) Functionalization of porous carbon materials with designed pore architecture. Adv Mater 21:265–293
Jun S, Joo SH, Ryoo R, Kruk M, Jaroniec M, Liu Z, Ohsuna T, Terasaki O (2000) Synthesis of new, nanoporous carbon with hexagonally ordered mesostructure. J Am Chem Soc 122:10712–10713
Chai GS, Yoon SB, Yu J-S, Choi J-H, Sung Y-E (2004) Ordered porous carbons with tunable pore sizes as catalyst supports in direct methanol fuel cell. J Phys Chem B 108:7074–7079
Qi J, Jiang L, Tang Q, Zhu S, Wang S, Yi B, Sun G (2012) Synthesis of graphitic mesoporous carbons with different surface areas and their use in direct methanol fuel cells. Carbon 50:2824–2831
Ding J, Chan K-Y, Ren J, F-s X (2005) Platinum and platinum–ruthenium nanoparticles supported on ordered mesoporous carbon and their electrocatalytic performance for fuel cell reactions. Electrochim Acta 50:3131–3141
Kim P, Kim H, Joo JB, Kim W, Song IK, Yi J (2005) Preparation and application of nanoporous carbon templated by silica particle for use as a catalyst support for direct methanol fuel cell. J Power Sources 145:139–146
Zhao D (2012) Ordered mesoporous materials. Wiley, New Jersey
Liang C, Dai S (2006) Synthesis of mesoporous carbon materials via enhanced hydrogen-bonding interaction. J Am Chem Soc 128:5316–5317
Bell W, Dietz S (2001) Mesoporous carbons and polymers. US Patent 6,297,293, 2 Oct 2001
Fujikawa D, Uota M, Sakai G, Kijima T (2007) Shape-controlled synthesis of nanocarbons from resorcinol–formaldehyde nanopolymers using surfactant-templated vesicular assemblies. Carbon 45:1289–1295
Fujikawa D, Uota M, Yoshimura T, Sakai G, Kijima T (2006) Surfactant-templated synthesis of resorcinol-formaldehyde polymer and carbon nanostructures: nanospheres and nanowires. Chem Lett 35:432–433
Nishiyama N, Zheng T, Yamane Y, Egashira Y, Ueyama K (2005) Microporous carbons prepared from cationic surfactant–resorcinol/formaldehyde composites. Carbon 43:269–274
Bruno MM, Cotella NG, Miras MC, Barbero CA (2010) A novel way to maintain resorcinol–formaldehyde porosity during drying: stabilization of the sol–gel nanostructure using a cationic polyelectrolyte. Colloids Surface A 362:28–32
Liang C, Hong K, Guiochon GA, Mays JW, Dai S (2004) Synthesis of a large-scale highly ordered porous carbon film by self-assembly of block copolymers. Angew Chem Int Ed 43:5785–5789
Pantea D, Darmstadt H, Kaliaguine S, Sümmchen L, Roy C (2001) Electrical conductivity of thermal carbon blacks: influence of surface chemistry. Carbon 39:1147–1158
Tanaka S, Nishiyama N, Egashira Y, Ueyama K (2005) Synthesis of ordered mesoporous carbons with channel structure from an organic-organic nanocomposite. Chem Commun 16:2125–2127
Xu J, Wang A, Zhang T (2012) A two-step synthesis of ordered mesoporous resorcinol–formaldehyde polymer and carbon. Carbon 50:1807–1816
Wang X, Liang C, Dai S (2008) Facile synthesis of ordered mesoporous carbons with high thermal stability by self-assembly of resorcinol − formaldehyde and block copolymers under highly acidic conditions. Langmuir 24:7500–7505
Meng Y, Gu D, Zhang F, Shi Y, Yang H, Li Z, Yu C, Tu B, Zhao D (2005) Ordered mesoporous polymers and homologous carbon frameworks: amphiphilic surfactant templating and direct transformation. Angew Chem Int Ed 44:7053–7059
Meng Y, Gu D, Zhang F, Shi Y, Cheng L, Feng D, Wu Z, Chen Z, Wan Y, Stein A, Zhao D (2006) A family of highly ordered mesoporous polymer resin and carbon structures from organic − organic self-assembly. Chem Mater 18:4447–4464
Deng Y, Yu T, Wan Y, Shi Y, Meng Y, Gu D, Zhang L, Huang Y, Liu C, Wu X, Zhao D (2007) Ordered mesoporous silicas and carbons with large accessible pores templated from amphiphilic diblock copolymer poly(ethylene oxide)-b-polystyrene. J Am Chem Soc 129:1690–1697
Atiyeh H, Karan K, Peppley B, Phoenix A, Halliop E, Pharoah J (2007) Experimental investigation of the role of a microporous layer on the water transport and performance of a PEM fuel cell. J Power Sources 170:111–121
Thomas YRJ, Bruno MM, Corti HR (2012) Characterization of a monolithic mesoporous carbon as diffusion layer for micro fuel cells application. Micropor Mesopor Mat 155:47–55
Krishnamurthy B, Deepalochani S (2009) Effect of PTFE content on the performance of a Direct Methanol fuel cell. Int J Hydrogen Energy 34:446–452
Wilkinson DP, Zhang J, Hui R, Fergus J, Li X (2009) Proton exchange membrane fuel cells: materials, properties and performance. CRC Press, London
Akio S (1964) On the carbonization of polyacrylonitrile fiber. Carbon 1:391–392
Shindo A, Fujii R, Sengoku T (1959) Method for manufacturing carbon product from acrylonitrile synthetic macromolecular substance. Japan Patent 37–4405
Greiner A, Wendorff JH (2007) Electrospinning: a fascinating method for the preparation of ultrathin fibers. Angew Chem Int Ed 46:5670–5703
Sutasinpromprae J, Jitjaicham S, Nithitanakul M, Meechaisue C, Supaphol P (2006) Preparation and characterization of ultrafine electrospun polyacrylonitrile fibers and their subsequent pyrolysis to carbon fibers. Polym Int 55:825–833
Mittal J, Mathur RB, Bahl OP (1997) Post spinning modification of PAN fibres – a review. Carbon 35:1713–1721
Yusof N, Ismail AF (2012) Post spinning and pyrolysis processes of polyacrylonitrile (PAN)-based carbon fiber and activated carbon fiber: a review. J Anal Appl Pyrol 93:1–13
Pierson HO (1995) Handbook of carbon, graphite, diamonds and fullerenes: processing, properties and applications. Noyes Publications, New Jersey
Ko T-H, Chiranairadul P, Lin C-H (1991) The influence of continuous stabilization on the properties of stabilized fibers and the final activated carbon fibers. Part I. Polym Eng Sci 31:1618–1626
Donnet JB (1998) Carbon fibers. CRC Press, New York
Zhang X, Shen Z (2002) Carbon fiber paper for fuel cell electrode. Fuel 81:2199–2201
Mathur RB, Maheshwari PH, Dhami TL, Tandon RP (2007) Characteristics of the carbon paper heat-treated to different temperatures and its influence on the performance of PEM fuel cell. Electrochim Acta 52:4809–4817
Liu C-H, Ko T-H, Liao Y-K (2008) Effect of carbon black concentration in carbon fiber paper on the performance of low-temperature proton exchange membrane fuel cells. J Power Sources 178:80–85
Mathur RB, Maheshwari PH, Dhami TL, Sharma RK, Sharma CP (2006) Processing of carbon composite paper as electrode for fuel cell. J Power Sources 161:790–798
Toray carbon paper specification (2005) http://www.torayca.com/en/index.html. Accessed 18 July 2012
Ballard gas difussion layer (2012) http://www.ballard.com/material-products/gas-diffusion.aspx. Accessed 18 July 2012
Liu C-H, Ko T-H, Kuo W-S, Chou H-K, Chang H-W, Liao Y-K (2009) Effect of carbon fiber cloth with different structure on the performance of low temperature proton exchange membrane fuel cells. J Power Sources 186:450–454
Ko T-H, Liao Y-K, Liu C-H (2007) Effects of graphitization of PAN-based carbon fiber cloth on its use as gas diffusion layers in proton exchange membrane fuel cells. New Carbon Mater 22:97–101
Wei J, Liang P, Huang X (2011) Recent progress in electrodes for microbial fuel cells. Bioresource Technol 102:9335–9344
Dicks AL (2006) The role of carbon in fuel cells. J Power Sources 156:128–141
Qi Z, Kaufman A (2002) Improvement of water management by a microporous sublayer for PEM fuel cells. J Power Sources 109:1–9
Tucker MC, Odgaard M, Lund PB, Yde-Andersen S, Thomas JO (2005) The pore structure of direct methanol fuel cell electrodes. J Electrochem Soc 152:A1844–A1844
Park G-G, Sohn Y-J, Yang T-H, Yoon Y-G, Lee W-Y, Kim C-S (2004) Effect of PTFE contents in the gas diffusion media on the performance of PEMFC. J Power Sources 131:182–187
Velayutham G (2011) Effect of micro-layer PTFE on the performance of PEM fuel cell electrodes. Int J Hydrogen Energy 36:14845–14850
Sun X, Saha MS (2008) Nanotubes, nanofibers and nanowires as supports for catalysts. In: Zhang J (ed) PEM fuel cell electrocatalysts and catalyst layers: fundamentals and applications. Springer, New York
Lin G, Nguyen TV (2005) Effect of thickness and hydrophobic polymer content of the gas diffusion layer on electrode flooding level in a PEMFC. J Electrochem Soc 152:A1942–A1948
Oedegaard A, Hebling C, Schmitz A, Møller-Holst S, Tunold R (2004) Influence of diffusion layer properties on low temperature DMFC. J Power Sources 127:187–196
Wang X, Zhang H, Zhang J, Xu H, Tian Z, Chen J, Zhong H, Liang Y, Yi B (2006) Micro-porous layer with composite carbon black for PEM fuel cells. Electrochim Acta 51:4909–4915
Wang T, Lin C, Fang Y, Ye F, Miao R, Wang X (2008) A study on the dissymmetrical microporous layer structure of a direct methanol fuel cell. Electrochim Acta 54:781–785
Chen-Yang YW, Hung TF, Huang J, Yang FL (2007) Novel single-layer gas diffusion layer based on PTFE/carbon black composite for proton exchange membrane fuel cell. J Power Sources 173:183–188
Du H-Y, Wang C-H, Hsu H-C, Chang S-T, Yen S-C, Chen L-C, Viswanathan B, Chen K-H (2011) High performance of catalysts supported by directly grown PTFE-free micro-porous CNT layer in a proton exchange membrane fuel cell. J Mater Chem 21:2512–2516
Tang Z, Poh CK, Tian Z, Lin J, Ng HY, Chua DHC (2011) In situ grown carbon nanotubes on carbon paper as integrated gas diffusion and catalyst layer for proton exchange membrane fuel cells. Electrochim Acta 56:4327–4334
Jeng K-T, Chien C-C, Hsu N-Y, Huang W-M, Chiou S-D, Lin S-H (2007) Fabrication and impedance studies of DMFC anode incorporated with CNT-supported high-metal-content electrocatalyst. J Power Sources 164:33–41
Wang CH, Du HY, Tsai YT, Chen CP, Huang CJ, Chen LC, Chen KH, Shih HC (2007) High performance of low electrocatalysts loading on CNT directly grown on carbon cloth for DMFC. J Power Sources 171:55–62
Gao Y, Sun GQ, Wang SL, Zhu S (2010) Carbon nanotubes based gas diffusion layers in direct methanol fuel cells. Energy 35:1455–1459
Gerteisen D, Heilmann T, Ziegler C (2008) Enhancing liquid water transport by laser perforation of a GDL in a PEM fuel cell. J Power Sources 177:348–354
Gerteisen D, Sadeler C (2010) Stability and performance improvement of a polymer electrolyte membrane fuel cell stack by laser perforation of gas diffusion layers. J Power Sources 195:5252–5257
Manahan MP, Hatzell MC, Kumbur EC, Mench MM (2011) Laser perforated fuel cell diffusion media. Part I: Related changes in performance and water content. J Power Sources 196:5573–5582
Bruno MM, Corti HR, Balach J, Cotella NG, Barbero CA (2009) Hierarchical porous materials: capillaries in nanoporous carbon. Funct Mat Lett 2:135–138
Bruno MM, Franceschini EA, Viva FA, Thomas YRJ, Corti HR (2012) Electrodeposited mesoporous platinum catalysts over hierarchical carbon monolithic support as anode in small PEM fuel cells. Int J Hydrogen Energy 37:14911–14919
DOE Hydrogen and Fuel Cells Program. 2011 Annual Progress Report (2011) No DOE/GO-102011-3422. U.S. Department of Energy, Washington, DC
Middelman E, Kout W, Vogelaar B, Lenssen J, de Waal E (2003) Bipolar plates for PEM fuel cells. J Power Sources 118:44–46
Blunk R, Abd Elhamid MH, Lisi D, Mikhail Y (2006) Polymeric composite bipolar plates for vehicle applications. J Power Sources 156:151–157
Heinzel A, Mahlendorf F, Niemzig O, Kreuz C (2004) Injection moulded low cost bipolar plates for PEM fuel cells. J Power Sources 131:35–40
Kim M, Yu HN, Lim JW, Lee DG (2012) Bipolar plates made of plain weave carbon/epoxy composite for proton exchange membrane fuel cell. Int J Hydrogen Energy 37:4300–4308
Lee Y-B, Lee C-H, Kim K-M, Lim D-S (2011) Preparation and properties on the graphite/polypropylene composite bipolar plates with a 304 stainless steel by compression molding for PEM fuel cell. Int J Hydrogen Energy 36:7621–7627
Mathur RB, Dhakate SR, Gupta DK, Dhami TL, Aggarwal RK (2008) Effect of different carbon fillers on the properties of graphite composite bipolar plate. J Mater Process Tech 203:184–192
Huang J, Baird DG, McGrath JE (2005) Development of fuel cell bipolar plates from graphite filled wet-lay thermoplastic composite materials. J Power Sources 150:110–119
Chen W, Liu Y, Xin Q (2010) Evaluation of a compression molded composite bipolar plate for direct methanol fuel cell. Int J Hydrogen Energy 35:3783–3788
de Oliveira MCL, Ett G, Antunes RA (2012) Materials selection for bipolar plates for polymer electrolyte membrane fuel cells using the Ashby approach. J Power Sources 206:3–13
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Bruno, M.M., Viva, F.A. (2014). Carbon Materials for Fuel Cells. In: Corti, H., Gonzalez, E. (eds) Direct Alcohol Fuel Cells. Springer, Dordrecht. https://doi.org/10.1007/978-94-007-7708-8_7
Download citation
DOI: https://doi.org/10.1007/978-94-007-7708-8_7
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-007-7707-1
Online ISBN: 978-94-007-7708-8
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)