Abstract
The paper develops a new FEM based algorithm for shakedown analysis of structures made of elastic plastic bounded linearly kinematic hardening material. The hardening effect is simulated by using a two-surface plastic model to bound the Melan-Prager model. The initial yield surface can translate inside the bounding surface, without changing its shape and size. The translated yield surface may touch the bounding surface and ratcheting may occur with clear benefit of hardening. Or it may not touch the bounding surface, alternating plasticity may occur and there is no effect of hardening. The direct calculation of plastic limit and shakedown bounds is considered as a nonlinear programming problem. The upper bound of the shakedown load is obtained as the minimum of the plastic dissipation function, which is based on the von Mises yield criterion.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bleich: Über die Bemessung statisch unbestimmter Stahltragwerke unter Berücksichtigung des elastisch-plastischen Verhaltens des Baustoffes. Bauingenieur 19/20, 261–266 (1932)
Bodovillé, G., de Saxcé, G.: Plasticity with non-linear kinematic hardening—modelling and shakedown analysis by the bipotential approach. Eur. J. Mech. A, Solids 20, 99–112 (2001)
Bouby, C., de Saxcé, G., Tritsch, J.-B.: A comparison between analytical calculations of the shakedown load by the bipotential approach and step-by-step computations for elastoplastic materials with nonlinear kinematic hardening. Int. J. Solids Struct. 43, 2670–2692 (2006)
Gokhfeld, D.A., Cherniavsky, O.F.: Limit Analysis of Structures at Thermal Cycling. Sijthoff & Noordhoff, Amsterdam (1980)
Koiter, W.T.: General theorems of elastic–plastic solids. In: Sneddon, J.N., Hill, R. (eds.) Progress in Solid Mechanics, vol. 1, pp. 67–221. North-Holland, Amsterdam (1960)
Heitzer, M., Staat, M.: Basic reduction technique for limit and shakedown problems. In: Staat, M., Heitzer, M. (eds.) Numerical Methods for Limit and Shakedown Analysis—Deterministic and Probabilistic Problems. NIC Series, vol. 15. John von Neumann Institute for Computing, Jülich (2003). http://www.fz-juelich.de/nic-series/volume15/nic-series-band15.pdf
Heitzer, M., Staat, M., Reiners, H., Schubert, F.: Shakedown and ratcheting under tension–torsion loadings—analysis and experiments. Nucl. Eng. Des. 225, 11–26 (2003). doi:10.1016/S0029-5493(03)00134-1
Makrodimopoulos, A., Bisbos, C.: Shakedown analysis of plane stress problems via SOCP. In: Staat, M., Heitzer, M. (eds.) Numerical Methods for Limit and Shakedown Analysis—Deterministic and Probabilistic Problems. NIC Series, vol. 15. John von Neumann Institute for Computing, Jülich (2003). http://www.fz-juelich.de/nic-series/volume15/nic-series-band15.pdf
Melan, E.: Theorie statisch unbestimmter Systeme aus ideal plastischem Baustoff. Sitzber. Akad. Wiss. Wien IIa 145, 195–218 (1936)
Melan, E.: Zur Plastizität des räumlichen Kontinuums. Ing.-Arch. 8, 116–126 (1938)
Nguyễn, Q.S.: On shakedown analysis in hardening. J. Mech. Phys. Solids 51, 101–125 (2003)
Phạm, Ð.C.: Shakedown static and kinematic theorems for elastic-plastic limited linear kinematic-hardening solids. Eur. J. Mech. A, Solids 24, 35–45 (2005)
Phạm, Ð.C.: Shakedown theory for elastic plastic kinematic hardening bodies. Int. J. Plast. 23, 1240–1259 (2007)
Prager, W.: A new method of analyzing stress and strain in work hardening plastic solids. J. Appl. Mech. 23, 493–496 (1956)
Staat, M., Heitzer, M.: LISA—a European project for FEM-based limit and shakedown analysis. Nucl. Eng. Des. 206(2–3), 151–166 (2001). doi:10.1016/S0029-5493(00)00415-5
Staat, M., Heitzer, M.: The restricted influence of kinematic hardening on shakedown loads. In: Proceedings of WCCM V, 5th World Congress on Computational Mechanics, Vienna, Austria, July 7–12 (2002). http://opus.bibliothek.fh-aachen.de/opus/volltexte/2005/79/
Stein, E., Huang, Y.J.: Shakedown for systems of kinematic hardening materials. In: Mróz, Z., Weichert, D., Doroz, S. (eds.) Inelastic Behaviour of Structures Under Variables Loads, pp. 33–50. Kluwer Academic, Norwell (1995)
Stein, E., Zhang, G.: Theoretical and numerical shakedown analysis for kinematic hardening materials. Computational plasticity. Fundamentals and applications. In: Owen, D.R.J., Oñate, E., Hinton, E. (eds.) Proc. 3rd Conf. on Computational Plasticity, Barcelona, Spain, 6–10th April, pp. 1–26. Pineridge, Swansea (1992)
Stein, E., Zhang, G., König, J.A.: Shakedown with nonlinear strain hardening including structural computation using finite element method. Int. J. Plast. 8, 1–31 (1992)
Stein, E., Zhang, G., Mahnken, R.: Shakedown analysis for perfectly plastic and kinematic hardening materials. In: Stein, E. (ed.) Progress in Computational Analysis of Inelastic Structures, pp. 175–244. Springer, Wien (1993)
Vũ, Ð.K.: Dual limit and shakedown analysis of structures. PhD Thesis, Université de Liège, Belgium (2001)
Weichert, D., Groß-Weege, J.: The numerical assessment of elastic-plastic sheets under variable mechanical and thermal loads using a simplified two-surface yield condition. Int. J. Mech. Sci. 30, 757–767 (1988)
Zhang, G.: Einspielen und dessen numerische Behandlung von Flächentragwerken aus ideal plastischem bzw. kinematisch verfestigendem material. Ph.D. Thesis, Universität Hannover, Germany (1991)
Acknowledgements
The work of Phú Tình Phạm has been supported by the Ministry of Education and Training of Vietnam (MOET) through the 322 project, and Aachen University of Applied Sciences, Germany.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer Science+Business Media Dordrecht
About this paper
Cite this paper
Phạm, P.T., Staat, M. (2013). An Upper Bound Algorithm for Limit and Shakedown Analysis of Bounded Linearly Kinematic Hardening Structures. In: de Saxcé, G., Oueslati, A., Charkaluk, E., Tritsch, JB. (eds) Limit State of Materials and Structures. Springer, Dordrecht. https://doi.org/10.1007/978-94-007-5425-6_4
Download citation
DOI: https://doi.org/10.1007/978-94-007-5425-6_4
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-007-5424-9
Online ISBN: 978-94-007-5425-6
eBook Packages: EngineeringEngineering (R0)