Abstract
A serious limitation of the traditional method of sexual hybridization to improve crop plants is reproductive isolation of two species. The rapid progress in understanding the plant processes during the past four decades has led to perfection of tools and techniques that allow transfer of specific genes without disrupting the elite phenotype of the recipient plant. This highly sophisticated technique of genetic modification of plants, variously referred to as recombinant DNA (rDNA) Technology, Genetic Transformation, Genetic Engineering (GE), Molecular Breeding or Precision Breeding, is not limited by sexual reproductive isolation. Required genes from any source, bacteria, viruses, fungi, animals or completely unrelated plants, can be inserted in a functional form into the genome of a well established plant cultivar, and their expression can be regulated so that it is expressed throughout the plant or in a specific organ or specific tissue of an organ. The genetically engineered crop plants are referred to as Transgenic Crops or Genetically Modified (GM) crops, and the gene introduced is termed transgene. The transgenic technology has emerged as one of the most powerful methods for crop improvement and has already produced several improved crop varieties by introducing a completely novel trait or manipulating a known biochemical pathway. Tissue or organ specific RNAi vectors have recently proved to be useful for targeted gene silencing in specific plant tissues and organs with minimal interference with the normal plant life cycle.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Suggested Further Reading
Agrawal N, Dasaradhi PVN, Mohmmed A, Malhotra P, Bhatnagar RK, Mukherjee SK (2003) RNA interference: biology, mechanism, and applications. Microbiol Mol Biol Rev 67:657–685
Ahuja V (2008) Safety assessment of GM food crops. In: Dhawan V (ed) Agriculture for food security and rural growth. TERI, New Delhi
Altpeter F, Sandhu S (2010) Genetic transformation—biolistics. In: Davey MR, Anthony P (eds) Plant cell culture: essential methods. Wiley, London
Altpeter F et al (2005) Particle bombardment and the genetic enhancement of crops: myths and realities. Mol Breed 15:305–327
Curtis MD, Grossniklaus U (2003) A gateway cloning vector set for high-throughput functional analysis of genes in plants. Plant Physiol 133:462–469
De Framond AJ, Barton KA. Chilton MD (1983) Mini-Ti: a new vector strategy for plant genetic engineering. Biotechnology 5:262–269
Ewen SWB, Pusztai A (1999) Effects of diets containing genetically modified potatoes expressing Galanthus nivalis lectin on rat small intestine. Lancet 354:1353–1354
Fitch MMM, Manshardt RM, Gonsalves D, Slightom JL, Sanford JC (1992) Virus resistant papaya derived from tissues bombarded with the coat protein gene of papaya ringspot virus. Bio/Technol 10:1466–1472
Gonsalves D (1998) Control of papaya ringspot virus in papaya: a case study. Annu Rev Phytopathol 36:415–437
Hoekema A, Hirsch PR, Hooykaas PJJ, Shilperoort RA (1983) A binary plant vector strategy based on separation of vir- and T-region of the Agrobacterium tumefaciens Ti-plasmid. Nature 303:179–180
Katsumoto Y, Fukuchi-Mizutani M, Fukui Y, Brugliera F, Holton TA, Karan M, Nakamura N, Yonekura-Sakakibara K, Togami J, Pigeaire A, Tao GQ, Nehra NS, Lu CY, Dyson BK, Tsuda S, Ashikari T, Kusumi T, Mason JG, Tanaka Y (2007) Engineering of rose flavanoid biosynthetic pathway successfully generated blue-hued flowers accumulating delphinidin. Plant Cell Physiol 48:1589–1600
Komari T, Takakura Y, Ueki J, Kato N, Ishida Y, Hiei Y (2006) Binary vectors and super-binary vectors. In: Wang K (ed.) Methods in molecular biology, vol 343, Agrobacterium protocols. Humana Press, New York
Lee LY, Gelvin SB (2008) T-DNA binary vectors and systems. Plant Physiol 146:325–332
Lemaux PG (2008) Genetically engineered plants and food: a scientist’s analysis of the issue (Part I). Annu Rev Plant Biol 59:771–812
Lemaux PG (2009) Genetically engineered plants and food: a scientist’s analysis of the issue (Part II). Annu Rev Plant Biol 60:511–559
Lin SS, Henriques R, Wu HW, Niu OW, Yeh SD, Chua NH (2007) Strategies and mechanisms of plant virus resistance. Plant Biotechnol Rep 1:125–134
Miki B (2008) Marker genes and promoters. In: Stewart CN Jr (ed) Plant biotechnology and genetics: principles, techniques and applications. Wiley, USA
Miki B, McHugh S (2004) Selectable marker genes in transgenic plants: applications, alternatives and biosafety. J Biotechnol 107:193–232
Mittler R, Blumwald E (2010) Genetic engineering for modern agriculture: challenges and perspectives. Annu Rev Plant Biol 61:443–462
Nawaz-ul-Rehman MS, Mansoor S, Khan AA, Zafar Y, Briddon RW (2007) RNAi-mediated male sterility of tobacco by silencing TA29. Mol Biotechnol 36:159–165
Niu QW, Lin SS, Reyes JL, Chen KC, Wu HW, Yeh SD, Chua NH (2006) Expression of artificial microRNAs in transgenic Arabidopsis thaliana confers virus resistance. Nat Biotech 24:1420–1428
Qu J, Ye J, Fang R (2007) Artificial miRNA-mediated virus resistance in plants. J Virol. doi:10.1128/JVI.02457-06
Rukavtsova EB, Alekseeva VV, Burianov YI (2010) The use of RNA interference for the metabolic engineering of plants. Russ J Bioorg Chem 36:146–156
Sharma AK, Jani D, Raghunath C, Tyagi AK (2004) Transgenic plants as bioreactors. Indian J Biotechnol 3:274–290
Sticklen MB (2008) Plant genetic engineering for biofuel production: towards affordable cellulosic ethanol. Nat Rev Genet 9:433–443
Tang G, Galili G, Zhuang X (2007) RNAi and microRNA: breakthrough technologies for the improvement of plant nutritional value and metabolic engineering. Metabolomics 3:357–369
Taylor NJ, Fanquet CM (2002) Microprojectile bombardment as a tool in plant science and agricultural biotechnology. DNA Cell Biol 21:963–977
Tripathi KK, Behera UN (2008) Agribiotechnology in India: biosafety issues, experiences and expectations. In: Dhawan V (ed) Agriculture for food security and rural growth. TERI, New Delhi
Wise AA, Liu Z, Binns A (2006) Three methods for the introduction of foreign DNA into Agrobacterium In: Wang K (ed) Methods in molecular biology, vol 343 Agrobacterium protocols. Humana Press, New York
Zale J (2008) Transgenic plant analysis. In: Stewart CN Jr (ed) Plant biotechnology and genetics: priciples, techniques and applications. Wiley, USA
Author information
Authors and Affiliations
Corresponding author
Appendix
Appendix
-
1.
Agrobacterium-mediated leaf disc method of transformation of tobacco. (after Horsch et al. 1985).
-
(i)
Immerse tobacco seeds in 10 % ‘Domestos’ bleach solution for 20–30 min and rinse three times in sterile distilled water. Place the seeds on a 64 μm nylon mesh during surface sterilization for easy handling.
-
(ii)
Sow the seeds on MSB medium containing MS salts, B5 vitamins and 3 % sucrose and gelled with 0.8 % agar (20 mL medium/9 cm Petri plate). Incubate the plates at 24–28 °C, under 16 h photoperiod with a light intensity of 48 μmol m−2 s−1 (daylight fluorescent tubes) for 7 days, when the cotyledons are fully expanded.
-
(iii)
Transfer individual seedlings to magenta boxes (one per box), each containing 40 ml of culture medium as in step (ii). Incubate the culture for 3–4 weeks under the same conditions as in step (ii) until plants have developed 4–5 leaves suitable for preparing leaf discs.
-
(iv)
Excise leaves from the in vitro plants or 28 days old greenhouse grown plants and place them on a sterile tile. Using a cork borer or a scalpel, excise 1 cm diameter discs and transfer them, with abaxial surface down, onto MSB medium supplemented with 1 mg L−1 BAP and 0.1 mg L−1 NAA (MS104; 7–8 discs per plate). Place a single filter paper over the discs to help keep them flat on the medium. Incubate under conditions as in (ii).
-
(v)
Take an overnight liquid culture of Agrobacterium tumefaciens and dilute it 10 times with MSB liquid medium (2Â ml of bacterium culture and 20Â ml MSB medium in 9Â cm Petri plates).
-
(vi)
Float the discs in bacterial suspension, making sure that the wounded surface of the explants is immersed in the suspension. After 5 min, blot the explants on a sterile filter paper, and transfer the explants back to MS104 medium and incubate at 24–26 °C at a low light intensity (24–48 μmol m−2 s−1) for 2 days.
-
(vii)
Transfer the explants to the selection medium (MS104 + 500 mg L−1 carbenicillin and 300 mg L−1 kanamycin sulfate.
-
(viii)
Shoots should be visible from the wounded edges of the discs after 18–21 days of inoculation. Putatively transformed shoots should emerge from kanamycin-resistant calli. After 28 days of inoculation, regenerated shoots should be large enough (ca 1 cm in height) to be excised and transferred to rooting medium (MSB + 500 mg L−1 carbenicillin + 300 mg L−1 kanamycin sulfate).
-
(i)
-
2.
Floral-dip method of transformation of radish. (after Curtis and Nam 2001).
-
(i)
Sow seeds (1 seed/3 cm2) in a deep seed tray (12 cm depth containing peat-based compost and maintain in a glasshouse under natural daylight, supplemented with 16 h photoperiod with a light intensity of 61 μmol m−2 s−1 (daylight fluorescent tubes) at 26 °C (day) and 18 °C (night).
-
(ii)
Transfer 3 to 4-week-old seedlings, individually, to deep pots (20Â cm diameter, 30Â cm depth) containing new compost to encourage plants to develop long tap roots. Maintain the plants under glasshouse conditions for 10Â days to aid recovery.
-
(iii)
At the six leaf stage, transfer the plants to a cold chamber set at 4 °C, 16 h photoperiod and light intensity of 45 μmol m−2 s−1 (daylight fluorescent tubes) for 10 days to promote bolting. Return the plants to the glasshouse under conditions as in step (i).
-
(iv)
Plants and with single thick stems and numerous immature floral buds are ideal for the transformation treatment.
-
(v)
Four days before floral dip treatment, take a loop-full of a glycerol stock of Agrobacterium strain AGL1 carrying pCAMBIA3301 and streak onto the agar (14 g L−1) solidified YEP medium (10 g L−1 tryptone, 10 g L−1 yeast extract, 5 g L−1 NaCl) containing 50 mg L−1 kanamycin and 100 mg L−1 rifampicin. Incubate the cultures in the dark at 28 °C for 2 days.
-
(vi)
Transfer a loop-full of bacteria to a 50 mL falcon tube containing 10 mL of bacterial culture medium (YEP medium + 50 mg L−1 kanamycin sulfate + 50 mg L−1 rifampicin). Place the culture on an orbital shaker at 1,800 rpm and maintain in dark at 28 °C overnight.
-
(vii)
Transfer 10 ml liquid bacterial culture to a 1 L flask containing 500 ml of bacterial culture medium and incubate for 12–16 h as described in step (vi) until the OD reaches 1.0 at 600 nm.
-
(viii)
Pellet the bacterial culture by centrifugation at 3,500 g, for 20 min at 4 °C. Resuspend the pellet in 500 mL of inoculation medium (50 g L−1 sucrose + 0.05 % v/v Silwet L-77, pH 5.2).
-
(ix)
Remove any floral buds which show petal color and carefully submerge the inflorescence into the inoculation medium and gently swirl for 5Â s. Cover the inflorescence with a ploythene bag.
-
(x)
Remove the bag next morning and allow the plants to grow under conditions as before. Hand pollinate all flowers using a fine paint brush to aid seed-set.
-
(i)
Rights and permissions
Copyright information
© 2013 Springer India
About this chapter
Cite this chapter
Bhojwani, S.S., Dantu, P.K. (2013). Genetic Engineering. In: Plant Tissue Culture: An Introductory Text. Springer, India. https://doi.org/10.1007/978-81-322-1026-9_15
Download citation
DOI: https://doi.org/10.1007/978-81-322-1026-9_15
Published:
Publisher Name: Springer, India
Print ISBN: 978-81-322-1025-2
Online ISBN: 978-81-322-1026-9
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)