Abstract
The main advantage of the fully autonomous system is its ability to decouple the weight/mass carrying function of the system from its forward motion function. It makes exoskeleton more efficient by reducing its power consumption, weight and size of the propulsion motors as well as by extending the run time of the batteries. A human machine interface has been achieved by means of flexible sensors to monitor subject shank and ankle movements and subject’s foot pressure. When subject stands on one leg and swings the other one the body weight is fully supported by standing leg exoskeleton structure where the knee joint motion is fully blocked. The join motors are small in size and consume less electrical energy from batteries because they do not support subject’s weight during the walk.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Zoss, A.B., Kazerooni, H., Chu, A.: Biomechanical design of the Berkeley lower extremity exoskeleton (BLEEX). IEEE/ASME Trans. Mechatron. 11(2), 128–138 (2006)
Suzuki, K., Mito, G., Kawamoto, H., Hasegawa, Y., Sankai, Y.: Intention-based walking support for paraplegia patients with robot suit HAL. Adv. Robot. 21, 1441–1469 (2007)
Jamwal, P.K., Sheng, Q.X., Shahid, H., John, G.P.: An adaptive wearable parallel robot for the treatment of ankle injuries. IEEE/ASME Trans. Mechatron. 19(1), 64–75 (2014)
Iqbal, J., Baizid, K.: Stroke rehabilitation using exoskeleton-based robotic exercisers Mini Review. Biomed. Res. 26(1), 197–201 (2015)
Banala, S., Agrawal, S., Scholz, J.: Robot assisted gait training with active leg exoskeleton (ALEX). IEEE Trans. Neural Syst. Rehabil. Eng. 17, 2–8 (2009)
Kawamoto, H., Sankai, Y.: Power assists method based on phase sequence and muscle force condition for HAL. J. Adv. Robot. 19(7), 717–734 (2005)
Kawabata, T., Satoh, H., Sankai, Y.: Working posture control of robot suit HAL for reducing structural stress. In: Proceedings of IEEE International Conference on Robotics and Biomimetics (ROBIO), pp. 2013–2018 (2009)
Ghan, J., Kazerooni, H.: System identification for the Berkeley lower extremity exoskeleton (BLEEX). In: Proceedings 2006 IEEE International Conference on Robotics and Automation (ICRA), pp. 3477–3484 (2006)
Heng, C., Jun, Z., Chunming, X., Hong, Z., Xiao, C., Yu, W.: Design and control of a hydraulic-actuated leg exoskeleton for load-carrying augmentation. In: Proceedings 2006 IEEE International Conference on Robotics and Automation (ICRA), Part I, LNAI 6424, pp. 590–599 (2010)
Walsh, C.J., Paluska, D.: Development of a lightweight, underactuated exoskeleton for load-carrying augmentation. In: Proceedings of IEEE International Conference on Robotics and Automation (ICRA), pp. 3485–3491 (2006)
Leslie, M.: The next generation of exoskeletons. Mag. IEEE Eng. Med. Biol. Soc. 3(4), 56–61 (2012)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this paper
Cite this paper
Mir-Nasiri, N. (2017). Efficient Lower Limb Exoskeleton for Human Motion Assistance. In: González-Vargas, J., Ibáñez, J., Contreras-Vidal, J., van der Kooij, H., Pons, J. (eds) Wearable Robotics: Challenges and Trends. Biosystems & Biorobotics, vol 16. Springer, Cham. https://doi.org/10.1007/978-3-319-46532-6_48
Download citation
DOI: https://doi.org/10.1007/978-3-319-46532-6_48
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-46531-9
Online ISBN: 978-3-319-46532-6
eBook Packages: EngineeringEngineering (R0)