Abstract
Musculoskeletal models and computer simulations have been extensively developed in recent years. The purpose of present study was to investigate the effect of uncertainty in segment masses on joint torques and muscle forces. Segment mass uncertainties estimated on the basis of Dempster measurement have been introduced to the musculoskeletal model Gait 2392. Inverse dynamics, static optimization and CMC algorithm have been performed using OpenSim software. The segment mass uncertainty has limited effect on the net joint moments. However, the error propagation in proximal direction have been observed and the greatest impact was observed for residual moments and forces acting on pelvis. The greatest effect on muscle forces can be observed for both static optimization and CMC results. Furthermore, considerable differences can be seen between static optimization and CMC results. Therefore, an accurate estimation of muscles forces and load condition in musculoskeletal system is still posing a challenge.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Anderson, F., Pandy, M.: A dynamic optimization solution for vertical jumping in three dimensions. Comput. Methods Biomech. Biomed. Eng. 2, 201–231 (1999)
Blemker, S., Asakawa, D., Gold, G., Delp, S.: Image-based musculoskeletal modeling: applications, advances, and future opportunities. J. Magnet. Reson. Imaging 25(2), 441–451 (2007)
Delp, S., Anderson, F., Arnold, A., Loan, P., Habib, A., John, C., Guendelman, E., Thelen, D.: Opensim: open-source software to create and analyze dynamic simulations of movement. IEEE Trans. Biomed. Eng. 54, 1940–1950 (2007)
Dempster, W.: Space reqirements of the seated operator. Geometrical, kinematic and mechanical aspects of the body with special reference to the limbs. Technical Report (55-159) (AD 87892). Wright Air Development Center. Air Research and Development Command. Wright-Patterson Air Force Base (1955)
Erdemir, A., McLean, S., Herzog, W., van den Bogert, A.: Model-based estimation of muscle forces excerted during movements. Clin. Biomech. 22, 131–154 (2007)
Fregly, B., Boninger, M., Reinkensmeyer, D.: Personalized neuromusculoskeletal modeling to improve treatment of mobility impairments: a perspective from european research sites. J. Neuroeng. Rehabil. 9(1), 1–18 (2012)
Ganley, K.J., Powers, C.M.: Determination of lower extremity anthropometric parameters using dual energy X-ray absorptiometry: The influence on net joint moments during gait. Clin. Biomech. 19(1), 50–56 (2004)
John, C., Seth, A., Schwartz, M., Delp, S.: Contributions of muscles to mediolateral ground reaction force over a range of walking speeds. J. Biomech. 45, 2438–2443 (2012)
Kiernan, D., Walsh, M., OSullivan, R., OBrien, T., Simms, C.: The influence of estimated body segment parameters on predicted joint kinetics during diplegic cerebral palsy gait. J. Biomech. 47(1), 284–288 (2014)
Kingma, I., Toussaint, H.M., De Looze, M.P., Van Dieen, J.H.: Segment inertial parameter evaluation in two anthropometric models by application of a dynamic linked segment model. J. Biomech. 29(5), 693–704 (1996)
Kuo, A.: A least-squares estimation approach to improving the precision of inverse dynamics computation. Trans. ASM 120, 148–159 (1998)
McConville, J., Clauser, C., Churchill, T.: Anthropometric Relationships of Body and Body Segment Moments of Inertia. Anthropology Research Project Inc., Yellow Springs (1980)
Nguyen, T., Reynolds, K.: The effect of variability in body segment parameters on joint moment using Monte Carlo simulations. Gait Posture 39(1), 346–353 (2014)
Pamies-Vila, R., Font-Llagunes, J., Cuadrado, J., Alonso, F.: Analysis of different uncertainties in the inverse dynamic analysis of human gait. Mech. Mach Theory 58, 153–164 (2012)
Pearsall, D., Costigan, P.: The effect of segment parameter error on gait analysis results. Gait Posture 9(3), 173–183 (1999)
Rao, G., Amarantini, G., Berton, E., Favier, D.: Influence of body segments parameters estimation models on inverse dynamics solutions during gait. J. Biomech. 39(8), 1531–1536 (2006)
Reinbolt, J., Haftka, R., Chmielewski, T., Fregly, B.: Are patient-specific joint and inertial parameters necessary for accurate inverse dynamics analyses of gait? IEEE Trans. Bio-med. Eng. 54, 782–793 (2007)
Riemer, R., Hsiao-Wecksler, E., Zhang, X.: Uncertainties in inverse dynamics solutions: a comprehensive analysis and an application to gait. Gait Posture 27(4), 578–588 (2008)
Scheys, L., Desloovere, K., Suetens, P., Jonkers, I.: Level of subject-specific detail in musculoskeletal models affects hip moment arm length calculation during gait in pediatric subjects with increased femoral anteversion. J. Biomech. 44(7), 1346–1353 (2011)
Silva, M., Jorge, A.: Sensitivity of the results produced by the inverse dynamic analysis of a human stride to perturbed input data. Gait Posture 19(1), 35–49 (2004)
Świątek-Najwer, E., Będzinski, R., Jr Dragan, S., Krysztoforski, K.: Investigation of lower limb mechanical axis using 3d sonography and magnetic resonance. Measurement 45, 702–710 (2012)
Taddei, F., Martelli, S., Valente, G., Leardini, A., Benedetti, M., Manfrini, M., Viceconti, M.: Femoral loads during gait in a patient with massive skeletal reconstruction. Clin. Biomech. 27(3), 273–280 (2012)
Thelen, D., Anderson, F., Delp, S.: Generating dynamic simulations of movement using computed muscle control. J. Biomech. 36, 321–328 (2003)
van den Bogert, A., Hupperets, M., Schlarb, H., Krabbe, B.: Predictive musculoskeletal simulation using optimal control: effects of added limb mass on energy cost and kinematics of walking and running. J. Sports Eng. Technol. 226, 123–133 (2012)
Wesseling, M., de Groote, F., Jonkers, I.: The effect of perturbing body segment parameters on calculated joint moments and muscle forces during gait. J. Biomech. 47, 596–601 (2014)
Żuk, M., Pezowicz, C.: Kinematic analysis of a six-degrees-of-freedom model based on isb recommendation: a repeatability analysis and comparison with conventional gait model. Appl. Bionics Biomech. 1–9 (2015)
Żuk, M., Świątek-Najwer, E., Pezowicz, C.: Hip joint centre localization: evaluation of formal methods and effects on joint kinematics. In: Pi/etka, E., Kawa, J., Wieclawek, W. (eds) Information Technologies in Biomedicine, vol. 4, pp. 56–67. Springer (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this paper
Cite this paper
Żuk, M., Pezowicz, C. (2016). The Influence of Uncertainty in Body Segment Mass on Calculated Joint Moments and Muscle Forces. In: Piętka, E., Badura, P., Kawa, J., Wieclawek, W. (eds) Information Technologies in Medicine. ITiB 2016. Advances in Intelligent Systems and Computing, vol 472. Springer, Cham. https://doi.org/10.1007/978-3-319-39904-1_31
Download citation
DOI: https://doi.org/10.1007/978-3-319-39904-1_31
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-39903-4
Online ISBN: 978-3-319-39904-1
eBook Packages: EngineeringEngineering (R0)