Skip to main content
Springer Nature Link
Log in

Influence of the Shape of Bevel Gear Wheel Bodies on Their Deformability

  • Conference paper
  • First Online:
Advanced Manufacturing Processes V (InterPartner 2023)

Part of the book series: Lecture Notes in Mechanical Engineering ((LNME))

  • 364 Accesses

Abstract

The load distribution in bevel gears depends on many factors, one of which is the deformation of the gear wheel body, which most researchers have neglected. The effect of rim deformation is not reflected in the ISO and AGMA standards. Many CAD Software packages include a finite element analysis module. Building a 3-D model of a gear bevel wheel is a time-consuming task. Replacing the ring gear with a smooth disk makes it possible to analyze the deformation of the rim as one of the stages of gear design. Calculations were carried out using the finite element method to check the adequacy of the simplified model. The calculation data were compared with experiments on disks that repeated the shape of the bevel wheel body. Also, full-scale tests of models of spur and spiral bevel gears made of Plexiglas were carried out. The applicability of the simplified model for most gear designs was proven. Particular attention was paid to wheels with a conical shape body of the wheel. The following body shapes of the wheel were considered: flat, conical surface (with the vertex located on the same side as the pith cone vertex), and conical surface (with the vertex located on the side opposite from the pith cone vertex).

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Similar content being viewed by others

References

  1. Li, Z., Wang, H., Zhu, R., Ye, W.: Solutions of active vibration suppression associated with web structures on face gear drives. J. Vibroeng. 14, 146–150 (2017). https://doi.org/10.21595/vp.2017.19009

    Article  Google Scholar 

  2. Guilbert, B., Velex, P., Cutuli, P.: Quasi-static and dynamic analyses of thin-webbed high-speed gears: centrifugal effect influence. Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci. 233(21–22), 7282–7291 (2019). https://doi.org/10.1177/0954406219855411

    Article  Google Scholar 

  3. Hou, L., Lei, Y., Fu, Y., Hu, J.: Effects of lightweight gear blank on noise, vibration and harshness for electric drive system in electric vehicles. Proc. Inst. Mech. Eng., Part K: J. Multi-Body Dyn. 234(3), 447–464 (2020). https://doi.org/10.1177/1464419320915006

    Article  Google Scholar 

  4. Gan, L., Xiao, K., Wang, J., Pu, W., Cao, W.: A numerical method to investigate the temperature behavior of spiral bevel gears under mixed lubrication condition. Appl. Therm. Eng. 147, 866–875 (2019). https://doi.org/10.1016/j.applthermaleng.2018.10.125

    Article  Google Scholar 

  5. Han, X., Hua, L., Deng, S., Luo, Q.: Influence of alignment errors on contact pressure during straight bevel gear meshing process. Chin. J. Mech. Eng. 28(6), 1089–1099 (2015). https://doi.org/10.3901/CJME.2015.0413.041

    Article  Google Scholar 

  6. Zhang, J.G., Liu, S.J., Fang, T.: Determination of surface temperature rise with the coupled thermo-elasto-hydrodynamic analysis of spiral bevel gears. Appl. Therm. Eng. 124, 494–503 (2017). https://doi.org/10.1016/j.applthermaleng.2017.06.015

    Article  Google Scholar 

  7. Klingelnberg, J.: Load capacity and efficiency. In: Klingelnberg, J. (ed.) Bevel Gear: Fundamentals and Applications, pp. 101–195. Springer Berlin Heidelberg, Berlin, Heidelberg (2016). https://doi.org/10.1007/978-3-662-43893-0_4

    Chapter  Google Scholar 

  8. Chodoła, Ł, Mazurkow, A., Surowaniec, M., Markowski, T., Homik, W.: Measurement method of temperature of the face gear rim of a spiroid gear. Sensors 22(22), 8860 (2022). https://doi.org/10.3390/s22228860

    Article  Google Scholar 

  9. Osakue, E.E., Anetor, L.: Comparing contact stress estimates of some straight bevel gears with ISO 10300 standards. In: ASME International Mechanical Engineering Congress and Exposition (2018), vol. 52187, p. V013T05A025. American Society of Mechanical Engineers (2018). https://doi.org/10.1115/IMECE2018-86572

  10. Simon, V.V.: Influence of tooth modifications on tooth contact in face-hobbed spiral bevel gears. Mech. Mach. Theory 46(12), 1980–1998 (2011). https://doi.org/10.1016/j.mechmachtheory.2011.05.002

    Article  Google Scholar 

  11. Fuentes, A., Iserte, J.L., Gonzalez-Perez, I., Sanchez-Marin, F.: Computerized design of advanced straight and skew bevel gears produced by precision forging. Comput. Methods Appl. Mech. Eng. 200(29–32), 2363–2377 (2011). https://doi.org/10.1016/j.cma.2011.04.006

    Article  MATH  Google Scholar 

  12. Medvecká-Beňová, S.: Analysis of gear wheel body influence on gearing stiffness. Acta Mechanica Slov. 21(3), 34–39 (2017)

    Article  Google Scholar 

  13. Maláková, S., Puškár, M., Frankovský, P., Sivák, S., Harachová, D.: Influence of the shape of gear wheel bodies in marine engines on the gearing deformation and meshing stiffness. J. Marine Sci. Eng. 9(10), 1060 (2021). https://doi.org/10.3390/jmse9101060

    Article  Google Scholar 

  14. Mieth, F., Ulrich, C., Schlecht, B.: Stress calculation on bevel gears with FEM influence vectors. Forsch Ingenieurwes 86, 491–501 (2022). https://doi.org/10.1007/s10010-021-00550-2

    Article  Google Scholar 

  15. Peng, S., Ding, H., Zhang, G., Tang, J., Tang, Y.: New determination to loaded transmission error of the spiral bevel gear considering multiple elastic deformation evaluations under different bearing supports. Mech. Mach. Theory 137, 37–52 (2019). https://doi.org/10.1016/j.mechmachtheory.2019.03.013

    Article  Google Scholar 

  16. Mathur, T.D., Smith, E.C., DeSmidt, H., Bill, R.C.: Load distribution and mesh stiffness analysis of an internal-external bevel gear pair in a pericyclic drive. In: 72nd American Helicopter Society International Annual Forum 2016: Leveraging Emerging Technologies for Future Capabilities, vol. 1, p. 2646−2657. American Helicopter Society (2016)

    Google Scholar 

  17. Simon, V.V.: Load distribution in spiral bevel gears. ASME. J. Mech. Des. 129(2), 201–209 (2006). https://doi.org/10.1115/1.2406090

    Article  Google Scholar 

  18. Lu, S., Ding, H., Rong, K., Rong, S., Tang, J., Xing, B.: Composite mechanical deformation based semi-analytical prediction model for dynamic loaded contact pressure of thin-walled aerospace spiral bevel gears. Thin-Walled Struct. 171, 108794 (2022). https://doi.org/10.1016/j.tws.2021.108794

    Article  Google Scholar 

  19. Ivanov, V., Dimitrov, L., Ivanova, S., Volkova, M.: Reverse engineering in the remanufacturing: metrology, project management, redesign. In: Karabegović, I. (ed.) NT 2021. LNNS, vol. 233, pp. 169–176. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-75275-0_20

    Chapter  Google Scholar 

  20. Li, S.: Effects of centrifugal load on tooth contact stresses and bending stresses of thin-rimmed spur gears with inclined webs. Mech. Mach. Theory 59, 34–47 (2013). https://doi.org/10.1016/j.mechmachtheory.2012.08.011

    Article  Google Scholar 

  21. Hou, X., Qiu, L., Zhang, Y., Li, Z., Zhu, R., Lyu, S.K.: High-speed spiral bevel gear dynamic rules considering the impact of web thicknesses and angles. Appl. Sci. 12(6), 3084 (2022). https://doi.org/10.3390/app12063084

    Article  Google Scholar 

  22. Nam, J.S., Park, Y.J., Kim, J.K., Han, J.W., Nam, Y.Y., Lee, G.H.: Application of similarity theory to load capacity of gearboxes. J. Mech. Sci. Technol. 28, 3033–3040 (2014). https://doi.org/10.1007/s12206-014-0710-5

    Article  Google Scholar 

  23. Wang, A.L., Zhu, C.: Research for scale effect based on similarity theory. Appl. Mech. Mater. 364, 833–837 (2013). https://doi.org/10.4028/www.scientific.net/AMM.364.833

    Article  Google Scholar 

  24. Ivanov, V., Ivanova, S., Urum, G., Purich, D.: An experimental study of the influence of mounting errors on the load distribution along the face width in a spur bevel gear. In: Karabegović, I. (ed.) NT 2021. LNNS, vol. 233, pp. 38–45. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-75275-0_4

    Chapter  Google Scholar 

Download references

Acknowledgment

This work has been accomplished with financial support from Grant No. BG05M2OP001-1.002-0011 “MIRACle (Mechatronics, Innovation, Robotics, Automation, Clean technologies)”.

Author information

Authors and Affiliations

  1. Odesa Polytechnic National University, 1, Shevchenko Avenue, Odessa, 65044, Ukraine

    Viktor Ivanov

  2. Technical University of Sofia, 8, Kliment Ohridski Blvd., Sofia, 1000, Bulgaria

    Lubomir Dimitrov

  3. South Ukrainian National Pedagogical University Named After K. D. Ushynsky, 26, Staroportofrankivs’ka Street, Odessa, 65020, Ukraine

    Svitlana Ivanova

  4. State University of Intellectual Technologies and Communications, 1, Kuznechnaya Street, Odessa, 65029, Ukraine

    Mariia Volkova

Authors
  1. Viktor Ivanov
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Lubomir Dimitrov
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Svitlana Ivanova
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Mariia Volkova
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Viktor Ivanov .

Editor information

Editors and Affiliations

  1. Odessa Polytechnic National University, Odessa, Ukraine

    Volodymyr Tonkonogyi

  2. Sumy State University, Sumy, Ukraine

    Vitalii Ivanov

  3. Poznań University of Technology, Poznan, Poland

    Justyna Trojanowska

  4. Odessa Polytechnic National University, Odessa, Ukraine

    Gennadii Oborskyi

  5. Sumy State University, Sumy, Ukraine

    Ivan Pavlenko

Rights and permissions

Reprints and permissions

Copyright information

© 2024 The Author(s), under exclusive license to Springer Nature Switzerland AG

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Ivanov, V., Dimitrov, L., Ivanova, S., Volkova, M. (2024). Influence of the Shape of Bevel Gear Wheel Bodies on Their Deformability. In: Tonkonogyi, V., Ivanov, V., Trojanowska, J., Oborskyi, G., Pavlenko, I. (eds) Advanced Manufacturing Processes V. InterPartner 2023. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-42778-7_3

Download citation

  • DOI: https://doi.org/10.1007/978-3-031-42778-7_3

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-031-42777-0

  • Online ISBN: 978-3-031-42778-7

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics