Abstract
The implementation of the new industrial revolution named - Industry 4.0 depends on a series of new and innovative technological achievements, most of which are applied in manufacturing domain. Progress in the field of information-communication technology (ICT), especially in the field of internet, enabled thedevelopment of the new manufacturing system models through the transformation of traditionally isolated, hierarchical structures into open and distributed networked structures.
Our personal view on the conception and evolution of manufacturing systems structures from the traditional manufacturing systems towards advanced manufacturing systems, such as the cyber-physical systems (CPS) in the domain of electro-pneumatic systemsis presentedin this paper.
This paper presents the model of the electro-pneumatic system (EPS) in a spirit of the cyber-physical systems. The development of a cyber-physical based EPS model represents an evolution extension of the electro-pneumatic systems from traditional systems into distributed networked systems based on the three key enablers of Industry 4.0: connectivity, digitalization and cybernation.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Hozdić, E.: Autonomous work systems in the cyber-physical production systems concept. In: Karabegović, I. (ed.) New Technologies, Development and Application III, vol. 128, 1st edn., pp. 238–249. Springer International Publishing, Cham (2020)
Tao, F., Cheng, Y., Zhang, L., Nee, Y.C.A.: Advanced manufacturing systems: socialization characteristics and trends. J. Intell. Manuf. 28(5), 1079–1094 (2017)
Wahlster, W.: Foundations of Semantic Product Memories for the Internet of Things. In: SemProM, vol. 49, no. 1, Springer (2013)
Kegermann, H., Wahlster, W., Johannes, H.: Recommendations for implementing the strategic initiative INDUSTRIE 4.0 Final report of the Industrie 4.0 Working Group. Frankfurt an Main (2013)
Bauernhansl, T.: Industry 4.0: Challenges and Opportunities for the Automation Industry (2013)
Hozdić, E., Kozjek, D., Butala, P.: A cyber-physical approach to the management and control of manufacturing systems. Strojniški Vestn. J. Mech. Eng., vol. 66, no. 1, pp. 61–70 (2020)
Gill, H.: NSF perspective and status on cyber-physical systems. In National Workshop on Cyber-physical Systems. TX, Austin (2006)
Lee, E.A., Seshia, S.A.: Introduction to Embedded Systems A Cyber - Physical Systems Approach. Berkeley University of California, California, USA (2011)
Foit, K., Banaś, W., Ćwikła, G.: The pneumatic and electropneumatic systems in the context of 4th industrial revolution. IOP Conf. Ser. Mater. Sci. Eng. 400, 022024 (2018)
Majumdar, S.R.: Pneumatic Systems: Principles and Maintenance. Tata McGraw-Hill Education (1996)
NPTEL - The National Programme on Technology Enhanced Learning, “Introduction of pneumatics,” 2013. https://nptel.ac.in/courses/112/106/112106175/
Marshall, R., et al.: Improving Compressed Air System Performance - A Sourcebook for Industry. Lawrence Berkeley National Laboratory Berkeley, CA (2003)
Ruppelt, E.: Druckluft-Handbuch. Vulkan-Verlag, Essen (1998)
Umaña, L.A.R., Baquero, J.E.M., Moreno, R.J.: Design and simulation of programmed sequences for electro pneumatic paper sealants using cascade method. Int. J. Appl. Eng. Res. 13(22), 15717–15724 (2018)
Koppa, P., et al.: Development and fabrication of electro pneumatic automatic stamping machine. Int. J. Innov. Res. Sci. Eng. Technol. 5(9), 16188–16197 (2016)
Kumar, R., Jay, R.B.R.: Design and simulation of electro-pneumatic motion sequence control using FluidSim. Appl. Mech. Mater. 446–447, 1146–1150 (2013)
Denkena, B., Dahlmann, D., Kiesner, J.: Sensor integration for a hydraulic clamping system. Procedia Technol. 15, 465–473 (2014)
Ahn, K., Yokota, S.: Intelligent switching control of pneumatic actuator using on/off solenoid valves. Mechatronics 15(6), 683–702 (2005)
Stoychitch, M.Y., Knezevic, B.Z.: Design of remote electro-pneumatic control system using microcontroller. IOP Conf. Ser. Mater. Sci. Eng. 477, 012034 (2019)
Suyetno, A., Kustono, D., Sudjimat, D.A.: Pneumatic control system simulation based a PLC micro in mechatronics courses. In: Proceedings of the International Mechanical Engineering and Engineering Education Conferences (IMEEEC 2016), p. 030035 (2016)
Singh, R., Verma, H.K.: Development of PLC-based controller for pneumatic pressing machine in engine-bearing manufacturing plant. Procedia Comput. Sci. 125, 449–458 (2018)
Bolton, W.: Programmable Logic Control, Sixth edit. Newnes, New York (2015)
Lee, E.A.: Cyber physical systems: design challenges. In: International Symposium on Object/Component/Service-Oriented Real-Time Distributed Computing (ISORC), pp. 363–369 (2008)
Baheti, R., Gill, H.: Cyber - physical systems. In: The Impact of Control Technology, pp. 161–166 (2011)
Monostori, L.: Cyber-physical production systems: roots, expectations and R&D challenges. Procedia CIRP 17, 9–13 (2014)
Leitão, P., Colombo, A.W., Karnouskos, S.: Industrial automation based on cyber-physical systems technologies: prototype implementations and challenges. Comput. Ind. 81, 11–25 (2016)
Eric, D.S., et al.: A Vision of Cyber - Physical Cloud Computing for Smart Networked Systems. National Institute of Information and Communications Technology, Department of Commerce (2013)
Lee, J., Bagheri, B., Kao, H.-A.: A Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems. Manuf. Lett. 3, 18–23 (2015)
Bagheri, B., Yang, S., Kao, H.-A., Lee, J.: Cyber-physical systems architecture for self-aware machines in industry 4.0 environment. IFAC-PapersOnLine 48(3), 1622–1627 (2015)
Jazdi, N.: Cyber physical systems in the context of Industry 4.0. In: 2014 IEEE International Conference on Automation, Quality and Testing, Robotics, pp. 1–4 (2014)
Wang, L., Törngren, M., Onori, M.: Current status and advancement of cyber-physical systems in manufacturing. J. Manuf. Syst. 37(2), 517–527 (2015)
Zhong, R.Y., Xu, X., Klotz, E., Newman, S.T.: Intelligent Manufacturing in the context of industry 4.0: a review. Engineering 3(5), 616–630 (2017)
Esmaeilian, B., Behdad, S., Wang, B.: The evolution and future of manufacturing: a review. J. Manuf. Syst. 39, 79–100 (2016)
Schuhmacher, J., Hummel, V.: Decentralized control of logistic processes in cyber-physical production systems at the example of ESB logistics learning factory. Procedia CIRP 54, 19–24 (2016)
SMC International Training, MAP201, Part feeder with detector and ejector for incorrect parts (2021). https://www.smctraining.com/en/webpage/indexpage/412
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Hozdić, E., Jurković, Z. (2021). The Electro-Pneumatic System as a Cyber - Physical System: The Concept. In: Karabegović, I. (eds) New Technologies, Development and Application IV. NT 2021. Lecture Notes in Networks and Systems, vol 233. Springer, Cham. https://doi.org/10.1007/978-3-030-75275-0_28
Download citation
DOI: https://doi.org/10.1007/978-3-030-75275-0_28
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-75274-3
Online ISBN: 978-3-030-75275-0
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)