Abstract
It is undeniable the increasing and current need to develop not only green materials and products but environmentally friendly and high-quality methods to synthesize them. In this sense, regarding the environmental impact, it is unquestionable the advantages of the utilization of natural materials and methods for synthesis. Naturally derived and recycled biomaterials applied in tissue engineering are advantageous over petroleum-derived ones mainly because of their biodegradability and sustainability. Specially, naturally derived compounds gain importance in these medical uses due to their capability to induce surrounding tissue and cell ingrowth in the implant site or to serve as temporary scaffolds for cell transplantation. Also, researchers are able to customize these biomaterials at the nanoscale in their physicochemical aspect considering each specific condition required by each respective application. On the other hand, interest in the novel use of engineered living materials as biofactories and decellularization technique to produce nanomaterials has vastly increased. Additionally, significant technological advances have been made in the use of environmentally friendly synthesis methods including clean cross-linking, non-solvent-induced phase separation for membrane obtention, electrospinning, centrifugal electrospin, and solid free-form fabrication. All of them focused on avoiding the disposal of solvents and toxic materials. This chapter provides an overview of sustainable nanomaterials applied in tissue engineering from a diversity of sources and eco-friendly novel strategies of synthesis.
This is a preview of subscription content, log in via an institution to check access.
References
Abdel-Mohsen AM, Abdel-Rahman RM, Kubena I, Kobera L, Spotz Z, Zboncak M, Prikryl R, Brus J, Jancar J (2020) Chitosan-glucan complex hollow fibers reinforced collagen wound dressing embedded with aloe vera. Part I: preparation and characterization. Carbohydr Polym 230:115708 . https://doi.org/10.1016/j.carbpol.2019.115708
Abzan N, Kharaziha M, Labbaf S (2019) Development of three-dimensional piezoelectric polyvinylidene fluoride-graphene oxide scaffold by non-solvent induced phase separation method for nerve tissue engineering. Mater Des 167:107636. https://doi.org/10.1016/j.matdes.2019.107636
Amaral HR, Wilson JA, Do Amaral RJFC, Pasçu I, De Oliveira FCS, Kearney CJ, Freitas JCC, Heise A (2021) Synthesis of bilayer films from regenerated cellulose nanofibers and poly (globalide) for skin tissue engineering applications. Carbohydr Polym 252:117201. https://doi.org/10.1016/j.carbpol.2020.117201
Aminabhavi TM, Dharupaneedi SP, More UA (2017) The role of nanotechnology and chitosan-based biomaterials for tissue engineering and therapeutic delivery. Elsevier Ltd
Antinori ME, Ceseracciu L, Mancini G, Heredia-Guerrero JA, Athanassiou A (2020) Fine-tuning of physicochemical properties and growth dynamics of mycelium-based materials. ACS Appl Bio Mater 3:1044–1051. https://doi.org/10.1021/acsabm.9b01031
Bakshi PS, Selvakumar D, Kadirvelu K, Kumar NS (2020) Chitosan as an environment friendly biomaterial – a review on recent modifications and applications. Int J Biol Macromol 150:1072–1083. https://doi.org/10.1016/j.ijbiomac.2019.10.113
Balalakshmi C, Gopinath K, Govindarajan M, Lokesh R, Arumugam A, Alharbi NS, Kadaikunnan S, Khaled JM, Benelli G (2017) Green synthesis of gold nanoparticles using a cheap Sphaeranthus indicus extract: impact on plant cells and the aquatic crustacean Artemia nauplii. J Photochem Photobiol B Biol 173:598–605. https://doi.org/10.1016/j.jphotobiol.2017.06.040
Borase HP, Patil CD, Suryawanshi RK, Koli SH, Mohite BV, Benelli G, Patil SV (2017) Mechanistic approach for fabrication of gold nanoparticles by Nitzschia diatom and their antibacterial activity. Bioprocess Biosyst Eng 40:1437–1446. https://doi.org/10.1007/s00449-017-1801-3
Campos F, Bonhome-Espinosa AB, Carmona R, Durán JDG, Kuzhir P, Alaminos M, López-López MT, Rodriguez IA, Carriel V (2021) In vivo time-course biocompatibility assessment of biomagnetic nanoparticles-based biomaterials for tissue engineering applications. Mater Sci Eng C 118:111476. https://doi.org/10.1016/j.msec.2020.111476
Chen C, Dirican M, Zhang X (2018a) Centrifugal spinning-high rate production of nanofibers. Elsevier Inc.
Chen Z, Lv X, Zhao M, Zhang P, Ren X, Mei X (2018b) Encapsulation of green tea polyphenol by pH responsive, antibacterial, alginate microgels used for minimally invasive treatment of bone infection. Colloids Surfaces B Biointerfaces 170:648–655. https://doi.org/10.1016/j.colsurfb.2018.06.065
Deepak V, Kalishwaralal K (2011) Metal nanoparticles in microbiology. Met Nanoparticles Microbiol:17–35. https://doi.org/10.1007/978-3-642-18312-6
Elbialy ZI, Assar DH, Abdelnaby A, Asa SA, Abdelhiee EY, Ibrahim SS, Abdel-Daim MM, Almeer R, Atiba A (2021) Healing potential of Spirulina platensis for skin wounds by modulating bFGF, VEGF, TGF-ß1 and α-SMA genes expression targeting angiogenesis and scar tissue formation in the rat model. Biomed Pharmacother 137:111349. https://doi.org/10.1016/j.biopha.2021.111349
Frone AN, Panaitescu DM, Nicolae CA, Gabor AR, Trusca R, Casarica A, Stanescu PO, Baciu DD, Salageanu A (2020) Bacterial cellulose sponges obtained with green cross-linkers for tissue engineering. Mater Sci Eng C 110:110740. https://doi.org/10.1016/j.msec.2020.110740
Gao X, Xu Z, Liu G, Wu J (2021) Polyphenols as a versatile component in tissue engineering. Acta Biomater 119:57–74. https://doi.org/10.1016/j.actbio.2020.11.004
Gayer C, Ritter J, Bullemer M, Grom S, Jauer L, Meiners W, Pfister A, Reinauer F, Vučak M, Wissenbach K, Fischer H, Poprawe R, Schleifenbaum JH (2019) Development of a solvent-free polylactide/calcium carbonate composite for selective laser sintering of bone tissue engineering scaffolds. Mater Sci Eng C 101:660–673. https://doi.org/10.1016/j.msec.2019.03.101
Gericke M, Pinches A (2006) Biological synthesis of metal nanoparticles. Hydrometallurgy 83:132–140. https://doi.org/10.1016/j.hydromet.2006.03.019
Gershlak JR, Hernandez S, Fontana G, Perreault LR, Hansen KJ, Larson SA, Binder BYK, Dolivo DM, Yang T, Dominko T, Rolle MW, Weathers PJ, Medina-Bolivar F, Cramer CL, Murphy WL, Gaudette GR (2017) Crossing kingdoms: using decellularized plants as perfusable tissue engineering scaffolds. Biomaterials 125:13–22. https://doi.org/10.1016/j.biomaterials.2017.02.011
Ghosal K, Bhattacharjee U, Sarkar K (2020) Facile green synthesis of bioresorbable polyester from soybean oil and recycled plastic waste for osteochondral tissue regeneration. Eur Polym J 122:109338. https://doi.org/10.1016/j.eurpolymj.2019.109338
Gilbert C, Ellis T (2019) Biological engineered living materials: growing functional materials with genetically programmable properties. ACS Synth Biol. https://doi.org/10.1021/acssynbio.8b00423
Giwa S, Lewis JK, Alvarez L, Langer R, Roth AE, Church GM, Markmann JF, Sachs DH, Chandraker A, Wertheim JA, Rothblatt M, Boyden ES, Eidbo E, Lee WPA, Pomahac B, Brandacher G, Weinstock DM, Elliott G, Nelson D, Acker JP, Uygun K, Schmalz B, Weegman BP, Tocchio A, Fahy GM, Storey KB, Rubinsky B, Bischof J, Elliott JAW, Woodruff TK, Morris GJ, Demirci U, Brockbank KGM, Woods EJ, Ben RN, Baust JG, Gao D, Fuller B, Rabin Y, Kravitz DC, Taylor MJ, Toner M (2017) The promise of organ and tissue preservation to transform medicine. Nat Biotechnol 35:530–542. https://doi.org/10.1038/nbt.3889
Gokila S, Gomathi T, Vijayalakshmi K, Faleh A. A, Sukumaran A, Sudha PN (2018) Development of 3D scaffolds using nanochitosan/silk-fibroin/hyaluronic acid biomaterials for tissue engineering applications. Int J Biol Macromol 120:876–885 . https://doi.org/10.1016/j.ijbiomac.2018.08.149
Golshayan D, Aubert J-D, Hullin R, Moradpour D, Venetz J-P, Manuel O, Pascual M (2020) SARS-CoV-2 infection and solid organ transplantation. Rev Med Suisse 16:815–818. doi. https://doi.org/10.1111/ajt.16428
Hembrick-Holloman V, Samuel T, Mohammed Z, Jeelani S, Rangari VK (2020) Ecofriendly production of bioactive tissue engineering scaffolds derived from egg- and sea-shells. J Mater Res Technol 9:13729–13739. https://doi.org/10.1016/j.jmrt.2020.09.093
Hu Y, Dan W, Xiong S, Kang Y, Dhinakar A, Wu J, Gu Z (2016) Development of collagen / polydopamine complexed matrix as mechanically enhanced and highly biocompatible semi-natural tissue engineering scaffold. Acta biomater 1–14. https://doi.org/10.1016/j.actbio.2016.10.017
Jones M, Kujundzic M, John S, Bismarck A (2020) Crab vs. mushroom: a review of crustacean and fungal chitin in wound treatment. Mar Drugs 18:64. https://doi.org/10.3390/md18010064
Kahrs C, Schwellenbach J (2020) Membrane formation via non-solvent induced phase separation using sustainable solvents: a comparative study. Polymer (Guildf) 186:122071. https://doi.org/10.1016/j.polymer.2019.122071
Kalimuthu K, Cha BS, Kim S, Park KS (2020) Eco-friendly synthesis and biomedical applications of gold nanoparticles: a review. Microchem J 152:104296. https://doi.org/10.1016/j.microc.2019.104296
Kazmer D (2016) 28 three-dimensional printing of plastics. In: Applied plastics engineering handbook. Elsevier Inc., Second Edi, pp 617–634
Larrañeta E, Henry M, Irwin NJ, Trotter J, Perminova AA, Donnelly RF (2018) Synthesis and characterization of hyaluronic acid hydrogels crosslinked using a solvent-free process for potential biomedical applications. Carbohydr Polym 181:1194–1205. https://doi.org/10.1016/j.carbpol.2017.12.015
Lukasiewicz B, Basnett P, Nigmatullin R, Matharu R, Knowles JC, Roy I (2018) Binary polyhydroxyalkanoate systems for soft tissue engineering. Acta Biomater 71:225–234. https://doi.org/10.1016/j.actbio.2018.02.027
Lungu A, Cernencu AI, Dinescu S, Balahura R, Mereuta P, Costache M, Syverud K, Stancu IC, Iovu H (2021) Nanocellulose-enriched hydrocolloid-based hydrogels designed using a Ca2+ free strategy based on citric acid. Mater Des 197:109200. https://doi.org/10.1016/j.matdes.2020.109200
Madub K, Goonoo N, Gimié F, Arsa IA, Schönherr H, Bhaw-Luximon A (2021) Green seaweeds ulvan-cellulose scaffolds enhance in vitro cell growth and in vivo angiogenesis for skin tissue engineering. Carbohydr Polym 251:117025. https://doi.org/10.1016/j.carbpol.2020.117025
Mahtabian S, Mehdi S, Tavangarian F (2021) From rose petal to bone scaffolds : using nature to fabricate osteon-like scaffolds for bone tissue engineering applications. Ceram Int. https://doi.org/10.1016/j.ceramint.2021.04.176
Mamidi N, Delgadillo RMV, González-Ortiz A (2021) Engineering of carbon nano-onion bioconjugates for biomedical applications. Mater Sci Eng C 120. https://doi.org/10.1016/j.msec.2020.111698
Manjari MS, Aaron KP, Muralidharan C, Rose C (2020) Highly biocompatible novel polyphenol cross-linked collagen scaffold for potential tissue engineering applications. React Funct Polym 153:104630. https://doi.org/10.1016/j.reactfunctpolym.2020.104630
Narayanan KB, Zo SM, Han SS (2020) Novel biomimetic chitin-glucan polysaccharide nano/microfibrous fungal-scaffolds for tissue engineering applications. Int J Biol Macromol 149:724–731. https://doi.org/10.1016/j.ijbiomac.2020.01.276
Nguyen PQ, Courchesne N-MD, Duraj-Thatte A, Praveschotinunt P, NSJ (2018) Engineered living materials: prospects and challenges for using biological systems to direct the assembly of smart materials. Physiol Behav 30:1–66. https://doi.org/10.1002/adma.201704847.Engineered
Noh YK, Dos Santos Da Costa A, Park YS, Du P, Kim IH, Park K (2019) Fabrication of bacterial cellulose-collagen composite scaffolds and their osteogenic effect on human mesenchymal stem cells. Carbohydr Polym 219:210–218. https://doi.org/10.1016/j.carbpol.2019.05.039
Ou Q, Huang K, Fu C, Huang C, Fang Y, Gu Z, Wu J, Wang Y (2020) Nanosilver-incorporated halloysite nanotubes/gelatin methacrylate hybrid hydrogel with osteoimmunomodulatory and antibacterial activity for bone regeneration. Chem Eng J 382:123019. https://doi.org/10.1016/j.cej.2019.123019
Predeina AL, Dukhinova MS, Vinogradov VV (2020) Bioreactivity of decellularized animal, plant, and fungal scaffolds: perspectives for medical applications. J Mater Chem B. https://doi.org/10.1039/d0tb01751e
Qiu R, Xiong W, Hua W, He Y, Sun X, Xing M, Wang L (2021) A biosynthesized gold nanoparticle from Staphylococcus aureus – as a functional factor in muscle tissue engineering. Appl Mater Today 22:100905. https://doi.org/10.1016/j.apmt.2020.100905
Saeed M, Beigi-Boroujeni S, Rajabi S, Rafati Ashteiani G, Dolatfarahi M, Özcan M (2021) A simple, green chemistry technology for fabrication of tissue-engineered scaffolds based on mussel-inspired 3D centrifugal spun. Mater Sci Eng C 121. https://doi.org/10.1016/j.msec.2020.111849
Safaee-Ardakani MR, Hatamian-Zarmi A, Sadat SM, Mokhtari-Hosseini ZB, Ebrahimi-Hosseinzadeh B, Rashidiani J, Kooshki H (2019) Electrospun Schizophyllan/polyvinyl alcohol blend nanofibrous scaffold as potential wound healing. Int J Biol Macromol 127:27–38. https://doi.org/10.1016/j.ijbiomac.2018.12.256
Sheehy EJ, Cunniffe GM, O’Brien FJ (2018) 5 - collagen-based biomaterials for tissue regeneration and repair. In: Barbosa MA, martins MCLBT-P and P as B for TR and R (eds). Woodhead publishing, pp 127–150
Singh A, Banerjee SL, Dhiman V, Bhadada SK, Sarkar P, Khamrai M, Kumari K, Kundu PP (2020) Fabrication of calcium hydroxyapatite incorporated polyurethane-graphene oxide nanocomposite porous scaffolds from poly (ethylene terephthalate) waste: a green route toward bone tissue engineering. Polymer (Guildf) 195:122436. https://doi.org/10.1016/j.polymer.2020.122436
Vaezi M, Yang S (2019) Freeform fabrication of nanobiomaterials using 3D printing. Second Edi, Elsevier Ltd
Veeruraj A, Liu L, Zheng J, Wu J, Arumugam M (2019) Evaluation of astaxanthin incorporated collagen film developed from the outer skin waste of squid Doryteuthis singhalensis for wound healing and tissue regenerative applications. Mater Sci Eng C 95:29–42. https://doi.org/10.1016/j.msec.2018.10.055
Vogt L, Rivera LR, Liverani L, Piegat A, El Fray M, Boccaccini AR (2019) Poly(ε-caprolactone)/poly(glycerol sebacate) electrospun scaffolds for cardiac tissue engineering using benign solvents. Mater Sci Eng C 103:109712. https://doi.org/10.1016/j.msec.2019.04.091
Xu Y, Lin L, Xiao M, Wang S, Smith AT, Sun L, Meng Y (2018) Synthesis and properties of CO2-based plastics: environmentally-friendly, energy-saving and biomedical polymeric materials. Prog Polym Sci 80:163–182. https://doi.org/10.1016/j.progpolymsci.2018.01.006
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 Springer Nature Switzerland AG
About this entry
Cite this entry
D’Elía, N.L., Sartuqui, J., Postemsky, P.D., Messina, P.V. (2022). Nanotechnology for the Obtention of Natural Origin Materials and Environmentally Friendly Synthesis Applied to Tissue Engineering. In: Shanker, U., Hussain, C.M., Rani, M. (eds) Handbook of Green and Sustainable Nanotechnology. Springer, Cham. https://doi.org/10.1007/978-3-030-69023-6_42-1
Download citation
DOI: https://doi.org/10.1007/978-3-030-69023-6_42-1
Received:
Accepted:
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-69023-6
Online ISBN: 978-3-030-69023-6
eBook Packages: Springer Reference Chemistry and Mat. ScienceReference Module Physical and Materials ScienceReference Module Chemistry, Materials and Physics