Abstract
The migration of Manufacturing Execution Systems could eliminate existing paper-based communication media for engineers and operators. This paper presents an approach to solve the resulting information deficit for the R&D process by the integration of a digital operator support system in a human-centered production environment. The design of the solution is based on analyzing the problem statement from two perspectives: (1) Logistics and material flow, (2) applied computer science. For (1) the machine setup is analyzed leveraging the Single Minute Exchange of Dies method. For (2) the design of the user interface for the digital operator support system the standards DIN EN ISO 9241-110 and DIN EN ISO 9241-12 are applied. The solution has been applied and evaluated through a user survey and measuring production performance indicators. Analysis of collected data shows increased user satisfaction and increased worker confidence of over 90% and a reduction of re-work up to 80%.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Waschneck, B., Altenmüller, T., Bauernhansl, T., Kyek, A.: Production scheduling in complex job shops from an industrie 4.0 perspective: a review and challenges in the semiconductor industry. CEUR Workshop 1793 (2017)
Gommel, U.: Grundlagen der Reinraumtechnik. Fert. unter reinen Bedingungen Grundlagen, Prax. und Anregungen zur Qual. 25, 40 (2014)
SEMI: SEMI E37–0702 - High-Speed SECS Message Services (HSMS) Generic Services (1998)
SEMI: SEMI E139 - 0310 - Specification for Recipe and Parameter Management (RaP) (2010)
Stadnicka, D.: Setup analysis: combining SMED with other tools. Manag. Prod. Eng. Rev. 6, 36–50 (2015)
Dave, Y., Sohani, N.: Single minute exchange of dies: literature review. Int. J. Lean Think 3(2), 27–37 (2012)
Moreira, A.C., Pais, G.C.S.: Single minute exchange of die. A case study implementation. J. Technol. Manag. Innov. 6, 129–146 (2011)
Nielsen, J., Kaufmann, M.: Usability Engineering. Academic Press, London (1993)
Deutsches Institut für Normung e. V.: DIN EN ISO 9241–210 Ergonomie der mensch-system-interaktion - teil 210: prozess zur gestaltung gebrauchstauglicher interkativer Systeme. 9241–210 (2011). p. 14 ff
ISO: ISO/TR 16982:2002(E) - Ergonomics of human-system ineraction - Usability methids supporting human-centered design (2002)
Deutsches Institut für Normung e. V.: DIN ISO 9241–11: Ergonomische anforderungen für bürotätigkeiten mit bildschirmgeräten, pp. 4–6 (1999)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Maier, F., Ihle, M., Paschke, T., Valea, V. (2020). Approach for a Digital Operator Support System for Manual Machine Setup. In: Mrugalska, B., Trzcielinski, S., Karwowski, W., Di Nicolantonio, M., Rossi, E. (eds) Advances in Manufacturing, Production Management and Process Control. AHFE 2020. Advances in Intelligent Systems and Computing, vol 1216. Springer, Cham. https://doi.org/10.1007/978-3-030-51981-0_31
Download citation
DOI: https://doi.org/10.1007/978-3-030-51981-0_31
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-51980-3
Online ISBN: 978-3-030-51981-0
eBook Packages: EngineeringEngineering (R0)