Abstract
This research implements the Finite Element Analysis of the contact between the flexible part and the CMM touch-probe in order to support the Cyber-Physical Manufacturing Metrology Model and its metrology integration into coordinate measuring machine (CMM) inspection of flexible parts. Although optical metrology offers a solution for flexible part measurements, because there is no contact between the measurand and the probing system, not all geometrical features are accessible by the optical CMM probe. Therefore, it is important to quantify and to validate the deformation introduced by the contact measuring process. The Cyber-Physical Systems connect the virtual and physical worlds in a way that intelligent objects communicate and interact with each other. This research will connect the physical measurement system consisting of CMM and flexible plastic part with their digital representation, where contact is simulated by means of Finite Element Method.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Jakovljević, Ž., et al.: Cyber-Physical Manufacturing Systems (CPMS). In: Proceedings of 5th International Conference on Advanced Manufacturing Engineering and Technologies, pp. 199–214. Springer (2017). https://doi.org/10.1007/978-3-319-56430-2
Karsai, G., Sztipanovits, J.: Model-integrated development of cyber-physical systems. In: IFIP International Workshop on Software Technologies for Embedded and Ubiquitous Systems, pp. 46–54. Springer (2008). https://doi.org/10.1007/978-3-540-87785-1_5
Lemeš, S.: Validation of numerical simulations by digital scanning of 3D sheet metal objects. Ph.D. thesis, University of Ljubljana (2010)
Majstorović, V., et al.: Path planning for inspection prismatic parts on CMM as a part of cyber-physical manufacturing metrology model. Proc. Manuf. Syst. 11(1), 3–8 (2016)
Deng, Y., Lu, Q., Chen, J., Chen, S., Wu, L., Tang, L.: Study on the extraction method of deformation influence factors of flexible material processing based on information entropy. Adv. Mech. Eng. (2014). https://doi.org/10.1155/2014/547947
Lemeš, S.: Comparison of similar injection moulded parts by a coordinate measuring machine. SN Appl. Sci. 1, 193 (2019). https://doi.org/10.1007/s42452-019-0191-3
Ascione, R., Polini, W.: Measurement of nonrigid freeform surfaces by coordinate measuring machine. Int. J. Adv. Manuf. Technol. 51, 1055–1067 (2010). https://doi.org/10.1007/s00170-010-2684-5
Jaramillo, A.E., Boulanger, P., Prieto, F.: On-line 3-D system for the inspection of deformable parts. Int. J. Adv. Manuf. Technol. 57, 1053–1063 (2011). https://doi.org/10.1007/s00170-011-3332-4
Baldwin, J.M., Summerhays, K.D., Campbell, D.A., Henke, R.P.: Application of simulation software to coordinate measurement uncertainty evaluations. NCSLI Meas. 2(4), 40–52 (2007). https://doi.org/10.1080/19315775.2007.11721398
Radvar-Esfahlan, H., Tahan, S.A.: Performance study of dimensionality reduction methods for metrology of nonrigid mechanical parts. Int. J. Metrol. Qual. Eng. 4(3), 193–200 (2013). https://doi.org/10.1051/ijmqe/2013051
ASME Y14.5 Dimensioning and tolerancing (ASME Y14.5-2018). The American Society of Mechanical Engineers National Standard. The American Society of Mechanical Engineers, New York (2018)
ISO 1101 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017). International Organization for Standardization/TC 213 Dimensional and geometrical product specifications and verification (2017)
Abenhaim, G.N., Desrochers, A., Tahan, A.: Nonrigid parts’ specification and inspection methods: notions, challenges, and recent advancements. Int. J. Adv. Manuf. Technol. 63(5–8), 741–752 (2012). https://doi.org/10.1007/s00170-012-3929-2
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Lemeš, S., Zaimović-Uzunović, N., Kačmarčik, J., Softić, A., Bašić, H. (2019). Cyber-Physical Approach to Coordinate Measurement of Flexible Parts. In: Majstorovic, V., Durakbasa, N. (eds) Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue. IMEKOTC14 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-18177-2_27
Download citation
DOI: https://doi.org/10.1007/978-3-030-18177-2_27
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-18176-5
Online ISBN: 978-3-030-18177-2
eBook Packages: EngineeringEngineering (R0)