Abstract
The paper presents the tests results on the fatigue crack growth under cyclic bending specimens at constant moment amplitude made of S355 steel with fillet welds. Rectangular specimens with stress concentrators in form of the external two-sided blunt notches and fillet welded joints were tested. The tests were performed under constant value of the stress ratio R = −1 without and after heat treatment. This research also presents the test results of the microstructure of welded joints taking into account changes in the material after heat treatment and the impact of these changes on the fatigue life of specimens.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Carpinteri A, Brighenti R, Huth HJ, Vantadori S (2005) Fatigue growth of a surface crack in a welded T-joint. Int J Fatigue 27:59–69
Kawiak M, Balitskii A (2018) Embrittlement of welded joints of tram rails in city environments. Eng Fail Anal 85:97–103
Sniezek L, Szachogłuchowicz I, Hutsaylyuk V (2016) Low cycle fatigue properties of AA2519–Ti6Al4 V laminate bonded by explosion welding. Eng Fail Anal 69:77–87
Prażmowski M, Rozumek D, Paul H (2017) Static and fatigue tests of bimetal Zr-steel made by explosive welding. Eng Fail Anal 75:71–81
Lewandowski J, Rozumek D (2016) Cracks growth in S355 steel under cyclic bending with fillet welded joint. Theoret Appl Fract Mech 86:342–350
Rozumek D, Marciniak Z (2008) Control system of the fatigue stand for material tests under combined bending with torsion loading and experimental results. Mech Syst Signal Process 22:1289–1296
Thum A, Petersen C, Swenson O (1960) Verformung, Spannung und Kerbwirkung. VDI-Verlag, Düesseldorf
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Rozumek, D., Lewandowski, J., Lesiuk, G., Correia, J.A. (2019). Crack Propagation Under Cyclic Bending in Welded Specimens After Heat Treatment. In: Correia, J., De Jesus, A., Fernandes, A., Calçada, R. (eds) Mechanical Fatigue of Metals. Structural Integrity, vol 7. Springer, Cham. https://doi.org/10.1007/978-3-030-13980-3_22
Download citation
DOI: https://doi.org/10.1007/978-3-030-13980-3_22
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-13979-7
Online ISBN: 978-3-030-13980-3
eBook Packages: EngineeringEngineering (R0)