Abstract
Assay validation/verification is a central activity of all clinical laboratories but commands particular emphasis in molecular pathology because of the recent growth and evolution of this discipline within the clinical laboratory and the rapid expansion of the application of molecular testing to patient care and management. Moreover, this area of laboratory medicine relies heavily on the development of in-house methods, which demand additional thoroughness and experimental rigor in their design and evaluation. The intent of this chapter is to provide an overview of the federal requirements that govern laboratory testing validation and verification and to provide general guidance for laboratory directors and technologists in planning a comprehensive step-by-step validation/verification procedure. However, because of the novel nature of molecular diagnostics, its diverse technologies and applications, and the variations found in regulations/guidelines from accrediting agencies, no single protocol can adequately address the full validation/verification process for each molecular test. Therefore, this chapter must be considered only as a general guide for those wishing to evaluate the performance characteristics of a new molecular test or testing platform in the clinical laboratory.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Food and Drug Administration, Department of Health and Human Services. 21 CFR 809. Food and Drugs, Chapter I, Subchapter H, Medical Devices, In Vitro Diagnostic Products for Human Use. Final rule. [41 FR 6903, Feb. 13, 1976]
Health Care Financing Administration (now Centers for Medicare & Medicaid Services), Public Health Service. 42 CFR Parts 405, 410, 416–418, 440, 482–485, 488, 491, 493, and 494. Medicare, Medicaid, and CLIA programs; regulations implementing the Clinical Laboratory Improvement Amendments of 1988 (CLIA). Final rule with comment period; 1992:7002–243.
Centers for Medicare & Medicaid Services, Centers for Disease Control and Prevention. 42 CFR Part 493. Medicare, Medicaid, and CLIA programs; laboratory requirements relating to quality systems and certain personnel qualifications. Final rule; 2003:3640–714.
Draft Guidance for Industry and FDA Staff. Commercially distributed in vitro diagnostic products labeled for research use only or investigational use only: frequently asked questions. U.S. Department of Health and Human Services, Food and Drug Administration, Center for Devices and Radiological Health, Office of In Vitro Diagnostic Device Evaluation and Safety, Center for Biologics Evaluation and Research [Issued 1 June 2011] www.fda.gov/downloads/medicaldevices/deviceregulationandguidancedocuments/ucm071269.pdf. Accessed 27th Aug 2011.
Scott M, Nguyen D. Clinical laboratory compliance: something old something new. LabMedicine. 2009;40:428–35.
Code of Federal Regulations. Title 21. Food and Drugs, vol. 8, chapter 1. Food and Drug Administration, Department of Health and Human Services, part 812. Investigational device exemptions. Washington, DC: U.S. Government Printing Office; 2010.
Burd EM. Validation of laboratory-developed molecular assays for infectious diseases. Clin Microbiol Rev. Jul 2010;23(3):550–76.
Jennings L, Van Deerlin VM, Gulley ML. Recommended principles and practices for validating clinical molecular pathology tests. Arch Pathol Lab Med. May 2009;133(5):743–55.
Cook JD. Chapter 17: Method evaluation. In: Christenson RH, Gregor LC, Johnson LJ, editors. Appleton and Lange’s outline review: clinical chemistry. London: McGraw-Hill Medical Publishing Division; 2001.
Rennert H, Leonard DGB. Chapter 49: Molecular pathology laboratory management. In: Leonard DGB, editor. Molecular pathology in clinical practice. New York/Berlin: Springer; 2007.
Wiktor AE, Van Dyke DL, Stupca PJ, et al. Preclinical validation of fluorescence in situ hybridization assay for clinical practice. Genet Med. 2006;8(1):16–23.
Mattocks CJ, Morris MA, Matthijs G, et al. A standardized framework for the validation and verification of clinical molecular genetic tests. Eur J Hum Genet. Dec 2010;18(12):1276–88.
Institute. CaLS. Quantitative molecular methods for infectious diseases; Approved guideline, 2nd edn. Wayne: Clinical and Laboratory Standards Institute; 2010.
Johnson R. Assessment of bias with emphasis on method comparison. Clin Biochem Rev. Aug 2008;29 Suppl 1:S37–42.
Nichols JH. Verification of method performance for clinical laboratories. Adv Clin Chem. 2009;47:121–37.
Persing DH. Molecular microbiology: diagnostic principles and practice. 2nd ed. Washington, DC: ASM Press; 2011.
Clark RB, Lewinski MA, Loeffelholz MJ, Tibbetts RJ. In: Sharp SE, editor. Cumitech 31A, verification and validation of procedures in the clinical microbiology laboratory coordinating. Washington, DC: ASM Press; 2009.
Burtis CA, Ashwood ER, Bruns DE. Tietz textbook of clinical chemistry and molecular diagnostics. 4th ed. St. Louis: Saunders; 2006.
CLSI. Statistical quality control for quantitative measurement procedures: principles and definitions; Approved guideline, 3rd edn. CLSI document C24-A3. Wayne: Clinical and Laboratory Standards Institute; 2006.
CLSI. Method comparison and bias estimation using patient samples. Approved guidelines, 2nd edn, interim revision. CLSI document EP09-A2-IR. Wayne: Clinical and Laboratory Standards Institute; 2010.
CLSI. Preliminary evaluation of quantitative clinical laboratory methods. Approved guidelines, 3rd edn. CLSI document EP10-A3. Wayne: Clinical and Laboratory Standards Institute; 2006.
CLSI. User verification of performance for precision and trueness. Approved guidelines, 2nd edn. CLSI document EP15-A2. Wayne: Clinical and Laboratory Standards Institute; 2006.
NCCLS. Estimation of total analytical error for clinical laboratory methods. Approved guidelines. NCCLS document EP21-A. Wayne: Clinical and Laboratory Standards Institute; 2003.
NCCLS. Protocols for determination of limits of detection and limits of quantitation. Approved guideline, 2nd edn. NCCLS document EP17-A. Wayne: Clinical and Laboratory Standards Institute; 2004.
CLSI. Statistical quality control for quantitative measurement procedures: principles and definitions. Approved guideline. CLSI document C24-A3. Wayne: Clinical and Laboratory Standards Institute; 2006.
CLSI. Collection, transport, preparation, and storage of specimens for molecular methods. Approved guideline. CLSI document MM13-A. Wayne: Clinical and Laboratory Standards Institute; 2006.
Winn-Deen ES. Standards and controls for genetic testing. Cancer Biomark. 2005;1(4–5):217–20.
Linnet K. Necessary samples size for method comparison studies based on regression analysis. Clin Chem. 1999;45(6):882–94.
CLSI. Analysis of body fluids in clinical chemistry. Approved guideline. CLSI document C49-A. Wayne: Clinical and Laboratory Standards Institute; 2007.
College of American Pathologists. Commission on Laboratory Accreditation, Laboratory Accreditation Program, Microbiology checklist. 07 Nov 2011.
College of American Pathologists. Commission on Laboratory Accreditation, Laboratory Accreditation Program, Molecular Pathology Checklist. 07 Nov 2011.
CLSI. Quantitative molecular methods for infectious diseases. Approved guidelines, 2nd edn. CLSI document MM06-A2. Wayne: Clinical and Laboratory Standards Institute; 2010.
CLSI. Defining, establishing, and verifying reference intervals in the Clinical Laboratory. Approved guideline, 3rd end. CLSI document C28-A3. Wayne: Clinical and Laboratory Standards Institute; 2008.
Kalenday R, Lee D, Schulman AH. Java web tools for PCR, in silico PCR, and oligonucleotide assembly and analysis. Genomics. 2011;98(2):137–44.
International Organization for Standardization. Statistics—vocabulary and symbols—Part 1: General statistical terms and terms used in probability. Geneva: International Organization for Standardization; 2006. ISO 3534–1.
NCCLS. Evaluation of precision performance of quantitative measurement methods. Approved guideline, 2nd edn. NCCLS document EP05-A2. Wayne: Clinical and Laboratory Standards Institute; 2004.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer Science+Business Media, LLC
About this chapter
Cite this chapter
McCloskey, C., Dunn, S.T. (2012). Test Validation. In: Hu, P., Hegde, M., Lennon, P. (eds) Modern Clinical Molecular Techniques. Springer, New York, NY. https://doi.org/10.1007/978-1-4614-2170-2_3
Download citation
DOI: https://doi.org/10.1007/978-1-4614-2170-2_3
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4614-2169-6
Online ISBN: 978-1-4614-2170-2
eBook Packages: MedicineMedicine (R0)