Abstract
The direct kinematic problem in parallel manipulators has multiple solutions that are traditionally called assembly modes. Non-singular transitions between some of these solutions have been detected and shown in the past. Cusp points have been defined as special points on the projection of the singularity curve onto the joint space that have the property of allowing such a non-singular transitions when encircling them. In this paper the authors will show that the condition for such a transition is more general. Authors also argue about the need for a differentiation between the concept of assembly mode and solution of the direct kinematic problem.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Bamberger, H., Wolf, A., Shoham M., Assembly mode changing in parallel mechanisms. IEEE Transactions on Robotics, submitted (2008).
Chablat, D., Wenger, Ph., Working modes and aspects in fully parallel manipulator. In Pro-ceedings IEEE International Conference on Robotics and Automation, pp. 1970-1976 (1998).
Chablat, D., Wenger, Ph., Séparation des solutions aux modèles géométriques direct et inverse pour les manipulateurs pleinement parallèles. Mechanism and Machine Theory 36(6), 763-783 (2001).
Chablat, D., Wenger, Ph., The kinematic analysis of a symmetrical three-degree-of-freedom planar parallel manipulator. CISM-IFToMM Symposium on Robot Design, Dynamics and Control, Montréal (2004).
Hunt, K.H., Primrose, E.J.F., Assembly configurations of some in-parallel-actuated manipulators. Mechanism and Machine Theory 28(1), 31-42 (1993).
Innocenti, C., Parenti-Castelli, V., Singularity-free evolution from one configuration to an-other in serial and fully-parallel manipulators. Journal of Mechanical Design 120(1), 73-79 (1998).
Macho, E., Altuzarra, O., Pinto, C., Hernandez, A., Singularity free change change of assembly mode in parallel manipulators. Application to the 3-RPR planar platform. In Proceedings of 12th World Congress in Mechanism and Machine Science, IFToMM 2007, Besançon, France (2007).
Macho, E., Altuzarra, O., Pinto, C., Hernandez, A., Workspaces associated to assembly modes of the 5R planar parallel manipulator. Robotica, in press (2008).
McAree, P.R., Daniel, R.W., An explanation of never-special assembly changing motions for 3-3 parallel manipulators. The International Journal of Robotics Research 18(6), 556-574 (1999).
Wenger, Ph., Chablat, D., Workspace and assembly modes in fully-parallel manipulators: A descriptive study. In Advances in Robot Kinematics: Analysis and Control, J. Lenar či č and M.L. Husty (Eds.), pp. 117-126. Kluwer Academic Publishers (1998).
Wenger, Ph., Chablat, D., Zein, M., Degeneracy study of the forward kinematics of planar 3-RPR parallel manipulators. Journal of Mechanical Design 129(12) (2007).
Zein, M.,Wenger, Ph., Chablat, D., Singular curves and cusp points in the joint space of 3-RPR parallel manipulators. In Proceedings of the 2006 IEEE International Conference on Robotics and Automation, Orlando, USA (2006).
Zein, M., Wenger, Ph., Chablat, D., Non-singular assembly mode changing motions for 3-RPR parallel manipulators. Mechanism and Machine Theory 43(4), 480-490 (2008).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2008 Springer Science+Business Media B.V
About this chapter
Cite this chapter
Macho, E., Altuzarra, O., Pinto, C., Hernandez, A. (2008). Transitions between Multiple Solutions of the Direct Kinematic Problem. In: Lenarčič, J., Wenger, P. (eds) Advances in Robot Kinematics: Analysis and Design. Springer, Dordrecht. https://doi.org/10.1007/978-1-4020-8600-7_32
Download citation
DOI: https://doi.org/10.1007/978-1-4020-8600-7_32
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-8599-4
Online ISBN: 978-1-4020-8600-7
eBook Packages: EngineeringEngineering (R0)